Environmental limitations on recruitment from seed in invasive Spartina densiflora on a southern European salt marsh     

Enrique Mateos-Naranjo  Susana Redondo-Gmez  Carlos J. Luque  Eloy M. Castellanos  Anthony J. Davy  M. Enrique Figueroa 《Estuarine, Coastal and Shelf Science》2008,79(4):727-732

The South American cordgrass, Spartina densiflora, has invaded a range of different habitats that can support different native species assemblages on salt marshes in the Gulf of Cadiz, Spain. Little is known about the mechanisms of invasion. We examined the potential for seed germination and recruitment in a field transplant experiment, representing a wide range of environments, on elevational gradients across marshes with muddy and sandy sediments. The biotic resistance of native, perennial vegetation (where present) to recruitment of the alien was also investigated. Spartina densiflora seeds were able to germinate over a greater than 2-m range of elevation in the tidal frame. Germination success on unvegetated muddy sediments was related to sediment redox potential, with poor germination at strongly negative redox potentials on the lower sites. On sandy, well-drained sediments, germination was apparently constrained by water availability at the highest elevations. Comparison of vegetated and cleared plots on the upper marsh showed that there was a negative relationship between the presence of Atriplex portulacoides and germination on the muddy sediments. Recruitment (survival of seedlings for 12 weeks) was seen only on unvegetated muddy sediments at the highest elevation. Hence the invasive success and wide elevational tolerance of S. densiflora on the marshes of the Gulf of Cadiz are not reflected in its short-term ability to become established from its prolific seed production. Colonization of sub-optimal habitats may be largely by vegetative propagules and clonal growth.  相似文献   

Numerical Simulation of Large Diameter Cylindrical Structure Slamming     

许靖  王德禹 《中国海洋工程》2008,22(3):513-520

The water entry of large diameter cylindrical structure is studied by applying numerical simulation method. The processes of different diameter cyhndrical structures impacting water with various constant velocities are calculated numerically. Thereafter, analyzed are the distribution of slamming pressure on structure during slamming course and the influence of slamming velocity and cylindrical diameter on slamming process. Furthermore, presented herein is an equation being used to forecast the peak slamming force on a large diameter cylindrical structure.  相似文献   

Experimental study on pore water pressure dissipation of mucky soil     

《世界地质(英文版)》2008,11(4)

Pore water pressure has an important influence on mechanical properties of soil. The authors studied the characteristics of pore water pressure dissipating of mucky soil under consolidated-drained condition by using refitted triaxial instrument and analyzed the variation of pore pressure coefficient with consolidation pressure. The results show that the dissipating of pore water pressure behaves in different ways depends on different styles of loading. What is more, the pore water pressure coefficient of mucky soil is less than 1. As the compactness of soil increases and moisture content reduces, the value of B reduces. There is a staggered dissipating in the process of consolidation, in which it is a mutate point when U/P is 80%. It is helpful to establish the pore water pressure model and study the strength-deformation of soil in process of consolidation.  相似文献   

深水滑翔机器人耐压壳体结构优化设计   总被引：1，自引：0，他引：1  

李延富  俞建成  封锡盛 《海洋工程》2008,26(4)

针对深水滑翔机器人耐压壳体在深水中压缩变形和海水密度随水深增大而变化等因素造成驱动浮力变化问题,利用压缩变形和密度变化对驱动浮力影响的互补特性,归纳了载体耐压壳体结构优化设计方法.保证耐压壳体抗压条件和质量最小前提下采用结构优化设计方法,降低耐压壳体压缩变形和海水密度变化对驱动浮力的影响,提高系统能源的利用率.  相似文献   

深海潜器耐压圆柱壳结构计算和校核方法研究   总被引：1，自引：0，他引：1  

潘治 《海洋技术学报》2008,27(2):83-87

文中比较了中美两国潜器规范中各特征量的计算方法和校核准则,分析了异同点,并给出数值算例。针对潜器特性,对目前我国潜器规范中可能需要修改的地方进行了初步分析。  相似文献   

pCO2 and carbon fluxes across sea-air interface in the Changjiang Estuary and Hangzhou Bay   总被引：1，自引：0，他引：1  

高学鲁  宋金明  李学刚  李宁  袁华茂 《中国海洋湖沼学报》2008,26(3)

Partial pressure of CO2(pCO2) was investigated in the Changjiang(Yangtze River) Estuary,Hangzhou Bay and their adjacent areas during a cruise in August 2004,China.The data show that pCO2 in surface waters of the studied area was higher than that in the atmosphere with only exception of a patch east of Zhoushan Archipelago.The pCO2 varied from 168 to 2 264 μatm,which fell in the low range compared with those of other estuaries in the world.The calculated sea-air CO2 fluxes decreased offshore and varied from -10.0 to 88.1 mmol m-2 d-1 in average of 24.4 ± 16.5 mmol m-2 d-1.Although the area studied was estimated only 2 × 104 km2,it emitted(5.9 ± 4.0) × 103 tons of carbon to the atmosphere every day.The estuaries and their plumes must be further studied for better understanding the role of coastal seas playing in the global oceanic carbon cycle.  相似文献   

铣削斜楔形区域形成及其对流场负压区的影响规律     

沈灿  李广慧  尹凝霞  薛姣  谭光宇 《广东海洋大学学报》2019,(3):109-114

【目的】研究在内喷淋冷却高速铣孔加工中,铣削斜楔形区域的形成对流场负压区的影响。【方法】对高速湿式铣削加工区域建立三维流场模型,应用计算流体力学软件Fluent,采用非结构化四面体网格单元,利用滑移网格技术对高速铣削过程进行三维瞬态计算。【结果】得到不同刃数、不同转速的立铣刀对同一孔径工件进行切削时流场的压力分布情况。三刃立铣刀斜楔形对流场负压影响最大,当立铣刀刃数增加时,此斜楔形区缩小,负压减小,转速为10 000～20 000 r/min时增长速度逐渐降低,20 000～35 000 r/min时增长速度逐渐增高。【结论】从流场角度分析,流场中最大负压值与转速呈正相关,转速的提高增加了抑制空化的难度;增加铣刀刃数,可减小流场斜楔形区面积,减小空化可能。  相似文献   

区域可持续发展能力的能值与(火用)耦合分析模型构建     

樊新刚  仲俊涛  杨美玲  文琦  马振宁  米文宝 《地理学报》2019,74(10):2062-2077

可持续发展能力评价方法是识别人地协同规律、支撑科学决策的重要工具和热点需求。通过文献回顾与理论分析框架构建,耦合能值及?方法,提出自组织能力指数（SO）、生态压力指数（EP）、可持续发展能力指数（SC）构成的,基于热力学理论的可持续发展能力分析模型,利用文献荟萃法筛选17个典型发达国家1985年状态值计算SO与EP阈值,划分了4个阶段。利用中美两国1985-2015年特征对比验证,结果显示：① 2005年以前中国属“低自组织能力、低生态压力”阶段,之后进入“低自组织能力、高生态压力”阶段,存在低生态效率、规模扩张驱动特征;美国一直属“高自组织能力、高生态压力”阶段,存在高生态效率驱动、经济与生态脱钩特征,与全球生态足迹网络和世界自然基金会等的研究结果一致,模型具有较好适应性和可靠性。② 模型利用“获得?量/输入能值量”表达经济社会生态效率、“经济社会?损耗量/生态系统年产?量”表达生态压力,连接了经济社会对生态基底的熵化路径,可识别区域所处可持续发展阶段、分析水平变化和驱动因素。③ 模型以人类与生态并重的视角,从深度上反映经济社会的生态效率、从广度上评价生态空间被占用比例,具有宏观规模与微观效率分析相结合的优势,是对经典方法的补充。  相似文献   

Experimental investigation of tsunami bore impact pressure on a perforated seawall     

《Applied Ocean Research》2019

Catastrophic failures of many tsunami barriers along the affected coasts during the 2011 Tohoku earthquake tsunami has prompted extensive investigation into improving and revising design codes for tsunami defence structures. To date, researchers and coastal engineers are investigating to understand the failure mechanisms and to find solutions so that the structures merely remain intact in the extreme event such as tsunami. Thus, the present work is motivated to experimentally study tsunami-induced bore pressures exerted on vertical seawalls; a solid vertical wall and a porous vertical seawall that consisted of a perforated front wall and a solid rear wall. Bores with various heights and velocities were generated by using the dam-break method. A porous seawall with 20% porosity of perforated front wall was used in this study. Bore pressures exerted on the solid rear wall and chamber oscillations that occurred in the experiments were also discussed. The experimental results showed that multiple peak pressures were observed during bore run-up phase in the time series of bore impacts. A predictive equation to estimate the maximum bore pressure on a perforated seawall was developed using multiple regression analysis. The proposed equation was also compared with previous empirical formulas.  相似文献   

Effects of long-term cyclic horizontal loading on bucket foundations in saturated loose sand     

《Applied Ocean Research》2019

A 1-g model experimental study was conducted to investigate the accumulated rotations and unloading stiffness of bucket foundations in saturated loose sand. One-way horizontal cyclic loading was applied to model bucket foundations with embedment ratios 0.5 and 1.0. Up to 10⁴ cycles of loading were applied at a frequency of 0.2 Hz varying load amplitudes. The accumulated rotation of the bucket foundations increased with the number of cycles and the load amplitudes. Empirical equations were proposed to describe the accumulated rotation of the foundations. The unloading stiffness of foundations increased with the number of cycles but decreased with an increase in load amplitude. The initial unloading stiffness of L/D = 1.0 (L is skirt length; D is foundation diameter) was approximately twice that of L/D = 0.5. Excess pore water pressure difference of 50% was observed between L/D = 0.5 and 1.0. The suction and static capacity of the bucket increased with increase of bucket embedment ratio with a difference of 69.5% and 73.6% respectively between L/D = 0.5 and 1.0.  相似文献