共查询到20条相似文献，搜索用时 390 毫秒
1.
A series of 1 g model tests was conducted to investigate the accumulated vertical pullout displacement and unloading stiffness of bucket foundations embedded in dry and saturated sands. The foundations were subjected to vertical pullout cyclic loading with different load amplitudes. Cyclic load was applied up to 104 cycles. Test results showed that the accumulated vertical pullout displacement increased with the increase in the number of load cycles and cyclic load amplitudes. The unloading stiffness of the bucket foundations decreased with the increase in load amplitude and number of cycles. Empirical equations were proposed based on the test results to evaluate the accumulated vertical pullout displacement and unloading stiffness of the bucket foundations in saturated sand. These equations can be used for the preliminary design of single or tripod bucket foundations. 相似文献
2.
The response of bucket foundations on sand subjected to planar monotonic and cyclic loading is investigated in the paper. Thirteen monotonic and cyclic laboratory tests on a skirted footing model having a 0.3 m diameter and embedment ratio equal to 1 are presented. The loading regime reproduces the typical conditions of offshore wind turbines: very large cyclic overturning moment, large cyclic horizontal load and comparatively little, self-weight induced, vertical load. The experimental soil-foundation response is interpreted within the macro-element approach, using an existing analytical model, suitably modified to accommodate the footing embedment and the application of cyclic load. Details of the proposed model are provided together with evidences of its ability to reproduce the essential features of the experimentally observed behaviour. The results of the study aim at increasing the confidence in the use of the macro-element approach to predict the response of bucket foundations for offshore wind turbines, notably as the long-term accumulated displacements are concerned. 相似文献
3.
Hiroyoshi Hirai 《Marine Georesources & Geotechnology》2013,31(4):452-466
ABSTRACTAn investigation is made to present analytical solutions provided by a three-dimensional displacement approach for analysis of bucket foundations subjected to vertical and lateral loads in cohesive soils. The nonlinear vertical and lateral stiffness coefficients along the skirt of the bucket foundation in nonhomogeneous soil are presented using three-dimensional solutions for vertical and lateral loads and taking into account the dependence of stiffness coefficients on the shear strain. The vertical, lateral, and rocking stiffness coefficients on the base of the skirt of a bucket foundation are obtained from the solutions of hollow rigid cylindrical punch acting on the surface of a soil. The ultimate vertical stress of a soil under the base of a bucket foundation subjected to vertical and moment loads is presented analytically by considering only compression and ignoring tension on the base. The vertical and lateral yields along the skirt and the compression and shear failures on the base are taken into account in analysis of ultimate load capacities. Envelopes of the combined ultimate horizontal and moment load capacities of a bucket foundation in clay are shown. Relationships between ultimate lateral and moment load capacities and the embedment ratio (skirt length to diameter) are presented. 相似文献
4.
ABSTRACTBucket foundations have been widely used for a variety of offshore applications. The effects of skirt length on ultimate bearing capacity of bucket foundation have been studied and reported in published scientific papers. However, few studies have addressed the behavior of bucket foundations in loose saturated sand. In this paper, a series of experimental investigations were performed to determine the bearing capacity of bucket foundation under uniaxial loading. The experiments were conducted on small-scale foundations under vertical loading in loose saturated sand. It was found that increasing the skirt length would enhance the bearing capacity of bucket foundation. As reflected in the present study, bearing strength might be enhanced more than 5 times in loose saturated sand in comparison to surface footing with equivalent diameter. Based on the experimental investigation, a depth factor was proposed to approximate bearing capacity of bucket foundations in terms of those for surface footing and embedment ratio. Moreover, the corresponding settlement of foundation at the failure load was found to increase with skirt length. 相似文献
5.
In this paper, results of a three-dimensional finite element study addressing the effect of embedment ratio (L/D) of caisson foundations on the undrained bearing capacity under uniaxial and combined loadings are discussed. The undrained response of caisson foundations under uniaxial vertical (V), horizontal (H) and moment (M) loading are investigated. A series of equations are proposed to predict the ultimate vertical, moment and maximum horizontal bearing capacity factors. The undrained response of caisson foundations under combined V-H and V-M load space is studied and presented using failure envelopes generated with side-swipe method. The kinematic mechanism accompanying failure under uniaxial loading is addressed and presented for different embedment ratios. Predictions of the uniaxial bearing capacities are compared with other models and it is confirmed that the proposed equations appropriately describe the capacity of caisson foundations under uniaxial vertical, horizontal and moment loading in homogenous undrained soils. The results of this paper can be used as a basis for standard design codes of off-shore skirted shallow foundations which will be the first of its kind. 相似文献
6.
The passive suction of suction foundations plays a significant role in pull-out resistance. The factors influencing the uplift capacity include stress state, embedment ratio, and loading rate. This article investigates the effect of embedment ratio and loading rate on the bearing behavior of suction foundations using centrifuge testing. A series of uplift tests on a suction foundation in clay were performed using a beam centrifuge. During the tests, uplift displacement, suction, and loading rate were monitored. The suction was obtained by measurement of water pressure. To compare the influence of different factors on uplift capacity due to passive suction, two types of uplift tests were conducted; the first was on the closed caisson and the second was on the vented caisson. The results show that the pull-out resistance increased with an increase of the uplift loading rate, which was induced by the suction. The maximum resistance occurred when the upward displacements reached 14%D under a ratio of skirt length (L) to diameter (D) (L/D) of 0.5 and 17%D under an L/D ratio of 2. These findings provide a way for suction caissons to resist pull-out load or for structures to be removed from the seabed. 相似文献
7.
A shallow suction bucket is a new foundation type for offshore wind turbines. Due to its large size and bulky shape, the bucket and the soil within the bucket do not necessarily deform as a whole. Moreover, limited research has been conducted on the hydrodynamic wave influence on the shallow bucket bearing response. These factors pose great challenges to the shallow bucket foundation design. This paper presents a set of centrifuge tests of a shallow bucket model subjected to monotonic and dynamic lateral loads to study the lateral bearing response of shallow bucket foundations in the field under combined loads induced by wind, waves, etc. In addition to the routine measurements (e.g., load-displacement), the soil pressures on the bucket and the distribution and evolution of the excess pore pressures in the surrounding soils are also obtained. The deformation pattern of the bucket (e.g., rotation center) is revealed through displacement measurements. Finally, the proposed easy-to-use analytical equations using the limit equilibrium to assess the bearing capacity of bucket foundations, taking into account the influence of the soil strength degradation caused by hydrodynamic wave loadings, are found to yield good results upon comparison with the centrifuge data, providing useful guidelines for the design of shallow bucket foundations. 相似文献
8.
文中主要采用小比尺模型试验,研究了台风对海上风电单桩基础累积变形的影响。通过在模型槽中进行桩的水平静力和循环加载试验,得到了不同工况下桩的累积转角与循环加载次数之间的关系曲线。随后对曲线进行分析,拟合出无台风工况下累积转角的计算公式,然后运用叠加法,得出了有台风工况下累积转角的计算公式。试验结果表明,单独作用一种循环荷载时,桩的累积转角是循环次数的幂函数。台风引起的大幅值循环荷载会导致转角的陡升,且增加幅度与小幅值循环荷载的幅值负相关。当将台风荷载设置在加载过程的开头时,对于疲劳设计工况,台风荷载产生的累积转角占总的累积转角的99%以上,因而可以忽略小幅值循环荷载产生的累积转角,直接用台风荷载产生的累积转角代表桩的长期累积转角,实现简化设计。 相似文献
9.
S. Rezazadeh 《Marine Georesources & Geotechnology》2018,36(6):625-639
Semi-deep skirted foundations are now considered to be a viable foundation option for a variety of onshore and offshore applications. The capacity under combined vertical, horizontal, and moment loadings must be found to ensure their capability and stability. In this study, undrained bearing capacity subjected to vertical loading, as part of combined loading is determined through stress characteristics and finite element analyses. Circular skirted foundations with different soil strength and geometries considering embedment depth effects have been studied. Stress field, kinematic mechanism accompanying failure, and bearing capacity factors for various embedment ratios are investigated. Acquired vertical failure mechanism has demonstrated the transition from a general shear to a punch shear failure. Comparisons with different research works including conventional methods, upper and lower bound, finite element analyses, physical modeling, experimental, and centrifuge tests have indicated the underestimation of conventional approaches and accuracy of proposed methods in determining bearing capacity. Furthermore, differences between predicted bearing capacities and the results of this study increased with D/B ratio due to ignoring the significant role of skin friction in larger embedment circumference. 相似文献
10.
This paper presents the results of three-dimensional finite element analyses of the suction bucket foundation used for offshore wind turbines. The behavior of the bucket and the response of soil supporting the bucket in dense and medium dense sandy soils subjected to static horizontal load are investigated. Field tests results and a centrifuge model test are used to validate the numerical model. Dimensionless horizontal load-displacement and overturning moment-rotation relationships are derived utilizing the Power law and Buckingham’s theorem. The results show good agreement between the numerical analysis results and the straight lines obtained from the Power law until a specific value of horizontal load and overturning moment. Regarding stress behavior of soil supporting the bucket, due to soil densification and bucket movement, maximum stresses are seen near the bucket tip at the right inside of the bucket. The major part of the applied load is transferred by the bucket skirt. Numerical analysis modeling results show that the bucket rotation and displacement are highly dependent on the bucket geometry and soil properties in addition to loading conditions. Normalized equations and figures for the ultimate horizontal load and overturning-moment capacities are presented and can be used for the preliminary design of the bucket foundations in sandy soils. 相似文献
11.
Suction caissons are considered as an alternative foundation solution for offshore wind turbines. In the present study, three-dimensional finite element (FE) analyses are performed to assess the behavior of a bucket foundation and soil supporting the bucket under cyclic and monotonic loading conditions. A parametric study is also performed for a wide range of bucket geometries and two different soil densities. The results indicate that bucket geometry and soil properties significantly affect the foundation response due to cyclic loading conditions. The bucket with the smallest geometry installed in medium dense soil exhibits the lowest stiffness in initial loading and then with the progress of cyclic loads experiences lower stiffness compared to the caissons with larger geometries. The sensitivity of the foundation response to the soil density is higher than its geometry. The bucket under the lowest vertical load experiences the lowest stiffness in both virgin loading and during the progress of cyclic loads. The highest soil displacement is observed near the lid at the interior of the bucket. Stresses caused by cyclic loading belong to certain ranges. Additionally, increases in the skirt length result in increases in the stress ranges and shift the range to the right side. With respect to the monotonic loading conditions, normalized diagrams are proposed that can be used for the preliminary design of suction bucket foundations. 相似文献
12.
《中国海洋工程》2020,(3)
Modified suction caissons (MSCs) acting as offshore wind turbine foundations will generate the accumulated rotation under cyclic loading resulted from waves. The accumulated rotation and the range of soil deformation around the MSC under long-term cyclic wave loading were studied using 3-D numerical simulations. The Morison equation was adopted to calculate the wave loadings. It was found that the MSC accumulated rotation increases linearly with the increase of the logarithm of cyclic number. The normalized expression was proposed to reflect the relationship between the accumulated rotation and cyclic number. The soil deformation range around the MSC increases when increasing the cyclic number and loading amplitude. It can also be concluded that the accumulated rotation increases rapidly with this change of excess pore pressure in the first 4000 cycles. The responses of the MSC to wave and wind loads were also investigated. Results show that the accumulated rotation of the MSC under both wave and wind loadings is larger than that under the wave loading only. 相似文献
13.
海上桶基平台基础边界条件的简化方法与结构优化 总被引：2，自引：1，他引：1
海上桶型基础平台采用桶型基础这一新型的基础型式,桶基平台在结构强度校核计算和结构优化中必须考虑其有限元分析模型的基础边界条件简化问题。本文提出了桶基平台有限元分析模型中的基础边界条件简化方法,将桶型基础边界简化为位移弹簧边界元,给出了弹簧刚度的计算方法。通过模型试验与本文提出方法的计算结果的比较,证明本文提出的方法是正确的。同时,将本文提出的方法应用于桶基火炬平台的结构优化,表明该方法是实际可行的并且对于桶基平台的结构强度校核计算与结构优化有重要意义。对于桶基火炬平台的结构优化采用了适合离散变量优化求解的遗传算法,优化的结果有效地降低了结构重量,降低了工程造价。 相似文献
14.
Xiaowei Tang Xiwen Zhang Qi Shao Zhenqing Li 《Marine Georesources & Geotechnology》2016,34(6):594-601
In the last 20 years, the bucket foundation has been developed as a new type of offshore platform structure. Because of its short period of application to engineering practices, the theoretical decision on the rotation center and horizontal bearing capacity of the bucket foundation has yet to be agreed. A limit analysis method is used to determine the updated rotation center position and horizontal bearing capacity to evaluate the failure mechanisms of the bucket foundations. The results are compared with numerical simulation and experiments, and also with other theoretical methods. The proposed method can satisfactorily consider the engineering conditions and the result is accurate in determining the rotation center and horizontal bearing capacity. 相似文献
15.
This article reports the response of embedded circular plate anchors to varying frequencies of cyclic loading. The effects of time period of loading cycles and pre-loading on movement of anchors and post-cyclic monotonic pullout behavior are studied using a model circular (80 mm diameter) plate anchor, buried at embedment ratio of six in a soft saturated clay. The frequencies of loading cycles have showed considerable effect on movement of anchors. For given duration of loading, higher frequency cycles cause more movement of anchor than lower frequency cycles. Pre-loading reduces the movement of anchors in subsequent loading stages. When anchors are recycled at a load ratio level less than the pre-cycling load, the movement of anchor in recycling phase are very much reduced, but if the recycling is done at a higher load ratio level, the effect is not that much pronounced and the anchors behave as if they were not subjected to any cycling load in the past. Anchor subjected to cyclic loading and then monotonic pullout shows an increase in initial stiffness, whereas the peak pullout load was found to decrease marginally over that of an anchor not subjected to any cyclic loading. For the present test conditions, the relative post-cyclic stiffness of anchors is found to vary from 1.169 to 1.327. 相似文献
16.
This article reports the response of embedded circular plate anchors to varying frequencies of cyclic loading. The effects of time period of loading cycles and pre-loading on movement of anchors and post-cyclic monotonic pullout behavior are studied using a model circular (80 mm diameter) plate anchor, buried at embedment ratio of six in a soft saturated clay. The frequencies of loading cycles have showed considerable effect on movement of anchors. For given duration of loading, higher frequency cycles cause more movement of anchor than lower frequency cycles. Pre-loading reduces the movement of anchors in subsequent loading stages. When anchors are recycled at a load ratio level less than the pre-cycling load, the movement of anchor in recycling phase are very much reduced, but if the recycling is done at a higher load ratio level, the effect is not that much pronounced and the anchors behave as if they were not subjected to any cycling load in the past. Anchor subjected to cyclic loading and then monotonic pullout shows an increase in initial stiffness, whereas the peak pullout load was found to decrease marginally over that of an anchor not subjected to any cyclic loading. For the present test conditions, the relative post-cyclic stiffness of anchors is found to vary from 1.169 to 1.327. 相似文献
17.
D. S. Sendek 《Oceanology》2012,52(6):790-796
The study of the genetic structure of the coregonid populations in the eastern part of the Gulf of Finland based on 30 enzyme loci revealed the poor differentiation of the majority of the samples from the Coregonus lavaretus L. populations that were caught close to the mainland??s shoreline (D N = 0.000?C0.005). The genetic differences between the anadromous whitefishes of the Gulf of Finland and the populations of whitefishes from the Ladoga and Onega lakes also turned out to be minimum. The sea populations of the species that populate the open part of the Gulf of Finland near the Russian islands have significantly diverged genetically from the main pool of the populations of the Gulf of Finland (D N = 0.018?C0.037). The presence of the CK-Al,2*c allele with a high frequency (p ?? 0.5) in the gene pool of the sea whitefish implies the probable origin of the island populations from a separate evolution lineage of whitefish of Western Europe or a taxon of complex evolution origin as a result of the introgressive hybridization between different species of coregonids. The phylogenetic closeness and common character of the origin of all the investigated samples of the vendace Coregonus albula L. from the Gulf of Finland and the Ladoga and Onega lakes are supported by the low values of the genetic distances between them (D N = 0.000?C0.008). 相似文献
18.
The influence of non-coaxial constitutive model on predictions of dense sand behavior is investigated in this paper. The non-coaxial model with strain softening plasticity is applied into finite-element program ABAQUS, which is first used to predict the stress-strain behavior and the non-coaxial characteristic between the orientations of the principal stress and principal plastic strain rate in simple shear tests. The model is also used to predict load settlement responses and bearing capacity factors of shallow foundations. A series of centrifuge tests for shallow foundations on saturated dense sand are performed under drained conditions and the test results are compared with the corresponding numerical results. Various footing dimensions, depths of embedment, and footing shapes are considered in these tests. In view of the load settlement relationships, the stiffness of the load-displacement curves is significantly affected by the non-coaxial model compared with those predicted by the coaxial model, and a lower value of non-coaxial modulus gives a softer response. Considering the soil behavior at failure, the coaxial model predictions of bearing capacity factors are more advanced than those of centrifuge test results and the non-coaxial model results;besides, the non-coaxial model gives better predictions. The non-coaxial model predictions are closer to those of the centrifuge results when a proper non-coaxial plastic modulus is chosen. 相似文献
19.
桶形基础的稳定性试验研究 总被引：2，自引：0，他引：2
桶形基础平台在环境载荷作用下承力机理不同桩基平台,本文通过室内模型试验分析研究桶形基础的稳定性,给出了部分试验曲线,得出了试验结论,并建议按规范要求进行稳定性设计。 相似文献
20.
风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。 相似文献