黑潮在吕宋海峡的形变及动力机制   总被引：6，自引：2，他引：6  

刘秦玉  刘倬腾  郑世培  徐启春  李薇 《中国海洋大学学报(自然科学版)》1996,(4)

根据１９９０年以来对吕宋海峡和中国南海（ＳＣＳ）北部的ＷＯＣＥ水文资料和其它海洋调查资料的分析，以及对同一海区的卫星遥测海表温度（ＳＳＴ）的资料处理，推断在吕宋海峡常年存在黑潮路径弯曲，西折进入ＳＣＳ并又流出ＳＣＳ的现象，作者将黑潮的这种变形称为“黑潮流套”。黑潮变形进入ＳＣＳ的位置在冬季位于海峡中部、南部附近，范围较大；在夏季略向北移，较集中于海峡中部，范围较小。作者认为，黑潮流套现象可用位涡守恒理论作定性的解释：当黑潮在吕宋海峡失去西边界支持后，其流轴以西贴近西边界的一部分流体，因具有较大的相对正涡度，会脱离黑潮主体在南海东北部形成反时针旋转或顺时针旋转的环流，而黑潮主体会以顺时针旋转的形式在海峡以西的海域出现。整个黑潮以弯曲、扩展的形式在海峡处产生形变，在海峡东侧出现反气旋涡旋的倾向。吕宋海峡黑潮流套及南海北部的诱生环流之流型，会因黑潮本身以及副热带环流整体的变化而变化，也与海峡的宽度有关。总之，吕宋海峡黑潮流套的形成是由当地特殊的地形条件和地转β效应这些内部机制决定的，它的常年存在有其必然性  相似文献   

南海罗斯贝变形半径的地理及季节变化   总被引：3，自引：1，他引：3  

甘子钧  蔡树群 《热带海洋学报》2001,20(1):1-9

根据南海 1°× 1°网格的标准层季节平均温、盐度资料 ,在未引入Boussinesq近似条件下 ,采用改进的Thompson Haskell算法求解线性化斜压海洋水平大尺度波的垂直结构方程 (重力内波方程 ) ,从而得到了南海各网格点的第一斜压重力波相速度和相应的罗斯贝变形半径 ,并探讨其地理分布和季节变化特征 ,以期有助于南海环流和中尺度涡旋以及有关海洋侧边界效应的研究。  相似文献   

海山富钴结壳标准物质研制   总被引：7，自引：0，他引：7       下载免费PDF全文

王毅民  高玉淑  王晓红  张学华  赵宏櫵  刘淑琴  ANDREEVSI 《海洋学报》2007,29(2):82-91

报道了我国与俄罗斯合作研制的三个海山富钴结壳标准物质GSMC-1,2,3.这三个标准物质的原样分别取自西太平洋麦哲伦海山和中太平洋海山.样品经风干、选配、球磨制备成均匀的粉体样品,其均匀性采用高精度的X-射线荧光光谱法检验.样品的化学组分采用国内外多实验室协同分析方式定值,有八个国内实验室和八个国外实验室参加了合作分析.测试组分均为57个,其中GSMC-1,2有43个组分定为保证值,10个组分作为参考值;GSMC-3有45个组分定为保证值,8个组分作为参考值.经2a多的试用,三个标准物质已于2005年被国家计量部门批准为国家一级标准物质,其编号分别为GBW07337,GBW07338和GBW07339.  相似文献   

浅地层剖面在富钴结壳调查研究中的应用   总被引：7，自引：0，他引：7  

李守军  陶春辉  初凤友  吴自银 《海洋技术学报》2007,26(1):54-57

文中以Topas PS018系统为例简要介绍浅地层剖面仪的工作原理和系统组成,重点介绍浅地层剖面在大洋富钴结壳资源调查研究中的应用情况。浅地层剖面资料与联合作业的海底视像、岩芯取样等资料进行对比和分析,发现浅地层剖面能够有效识别基岩、板状结壳、砾状结壳、砂、沉积物等不同底质类型,对浅地层剖面资料进行深入挖掘能够提取出富钴结壳矿区界线信息。  相似文献   

网格剖分积分法计算富钴结壳资源量     

吴自银  初凤友  马维林  李守军 《海洋学报》2007,29(5):81-87

在矿区地质模型建立及边界条件限定的基础上,提出了基于网格剖分积分计算富钴结壳资源量的评估计算方法,推导了相应的计算公式,设计了相应的模块界面,并在"海底地形地貌自动成图系统"中实现了这种计算方法.这种资源量计算方法可应用于富钴结壳资源研究和评价计算.  相似文献   

真空预压联合碎石桩加固港口吹填堆场地基的试验研究     

丛建  曹永琅  杨成军 《海岸工程》2007,26(1):41-47

在港口工程建设中,快速加固超软弱的吹填地基,采用真空预压法是一个经济有效的方法,再联合以碎石桩加固则能进一步提高地基的承载力、减少地基工后沉降.通过真空预压联合碎石桩加固地基的现场试验以及观测资料的分析,得出真空预压联合碎石桩加固后地基的承载力特征值由原天然地基的60 kPa左右提高到220 kPa,计算结果表明打碎石桩后的地基变形模量Esp与真空预压后的Ea相比提高了1倍,联合碎石桩加固后的地基沉降量比仅经过真空预压的地基减少1/3.  相似文献   

动态基准实时测量系统的开发与应用   总被引：3，自引：0，他引：3  

卫建东  徐忠阳  张良琚 《海洋测绘》2005,25(1):31-35

介绍了动态基准实时测量系统的硬件组成、站点上全站仪棱镜组合安装与检测方法、系统软件的开发及特点，最后对系统在广州地铁某地铁站结构变形自动监测中的应用情况进行了阐述。通过实际应用表明该系统能应用在自动化、高精度的变形监测领域。  相似文献   

Crustal Structures of the Northernmost South China Sea: Seismic Reflection and Gravity Modeling   总被引：2，自引：0，他引：2  

Yi-Ching Yeh  Shu-Kun Hsu 《Marine Geophysical Researches》2004,25(1-2):45-61

The South China Sea (SCS) is a marginal sea off shore Southeast Asia. Based on magnetic study, oceanic crust has been suggested in the northernmost SCS. However, the crustal structure of the northernmost SCS was poorly known. To elaborate the crustal structures in the northernmost SCS and off southwest Taiwan, we have analyzed 20 multi-channel seismic profiles of the region. We have also performed gravity modeling to understand the Moho depth variation. The volcanic basement deepens southeastwards while the Moho depth shoals southeastwards. Except for the continental margin, the northernmost SCS can be divided into three tectonic regions: the disturbed and undisturbed oceanic crust (8–12 km thick) in the southwest, a trapped oceanic crust (8 km thick) between the Luzon-Ryukyu Transform Plate Boundary (LRTPB) and Formosa Canyon, and the area to the north of the Formosa Canyon which has the thickest sediments. Instead of faulting, the sediments across the LRTPB have only displayed differential subsidence offset of about 0.5–1 s in the northeast side, indicating that the LRTPB is no longer active. The gravity modeling has shown a relatively thin crust beneath the LRTPB, demonstrating the sheared zone character along the LRTPB. However, probably because of post-spreading volcanism, only the transtension-shearing phenomenon of volcanic basement in the northwest and southeast ends of the LRTPB can be observed. These two basement-fractured sites coincide with low gravity anomalies. Intensive erosion has prevailed over the whole channel of the Formosa Canyon.  相似文献   

Two-Dimensional Mathematical Model of Tidal Current and Sediment for Oujiang Estnary and Wenzhou Bay   总被引：1，自引：0，他引：1  

LU  Yongjun 《中国海洋工程》2002,16(1):107-122

A 2-D mathematical model of tidal current and sediment has been developed for the Oujiang Estuary and the WenzhouBay. This model accomodates complicated features including multiple islands, existence of turbidity, and significant differ-ence in size distribution of bed material. The governing equations for non-uniform suspended load and bed load transport arepresented in a boundary-fitted orthogonal curvilinear coordinate system. The numerical solution procedures along with theirinitial conditions, boundary conditions, and movable boundary technique are presented. Strategies for computation of thecritical condition of deposition or erosion, sediment transport capacity, non-uniform bed load discharge, etc. are suggested.The model verification computation shows that, the tidal levels computed from the model are in good agreement with the fielddata at the 18 tidal gauge stations. The computed velocities and flow directions also agree well with the values measuredalong the totally 52 synchronously observed verticals distributed over 8 cross sections. The computed tidal water throughputsthrough the Huangda‘ao cross section are close to the measured data. And the computed values of bed deformation fromYangfushan to the estuary outfall and in the outer-sea area are in good agreement with the data observed from 1986 to 1992.The changes of tidal volumes through the estuary, velocities in different channels and the bed form due to the influence of thereclamation project on the Wenzhou shoal are predicted by means of this model.  相似文献   

Articulated Lifting System Modeling Based on Dynamics of Flexible Multi-Body Systems     

徐妍  冯雅丽  张文明 《中国海洋工程》2007,21(4):715-722

  相似文献