岩石块体滑动的界面摩擦阻抗时效研究     

左红伟 《工程地质学报》2000,8(2):154-159

基于岩石块体摩擦滑动试验反映的特征规律 ,本文分析了岩块随时间滑动的界面阻抗机理 ,并建立粘滑位移弱化时反映滑动界面阻抗时间效应的模型公式阻抗松弛模型。  相似文献   

断层摩擦系数及其演化定量研究的新途径          下载免费PDF全文

郑文卿  陈瑶  袁道阳 《地震工程学报》2000,22(2):160-166

在活断层的力学性质参数中 ,摩擦系数有着特别重要的意义 .它是建立活断层运动学与动力学之间物理力学关系进而促进地震地质研究沿着“由静到动、由定性到定量”方向深入发展的关键性参数之一 ,也是建立活断层重新滑动准则从而定量评估断层稳定性或地震危险性不可缺少的物理参数 .目前 ,断层摩擦系数主要是应用双剪法对采自断层的断层泥进行实验室测试和研究而取得的 .这样取得的结果很难说能够代表断层实际摩擦系数 ,尤其很难反映断层深部摩擦性状 ,采用实验室方法是无法测知不同地质时期断层活动所显示的摩擦性状及其演化特征的 .因此 ,必须寻找定量确定断层摩擦系数及其演化特征的新途径 .通过理论研究和实际应用提出了根据对活断层运动学实测资料的分析并结合年代学测试定量确定断层摩擦系数和动力学主要参数及其演化特征的新途径 .  相似文献   

Mineralogy and physical nature of clay gouge     

Francis T. Wu 《Pure and Applied Geophysics》1978,116(4-5):655-689

Fault gouges have been observed in the surface outcrops, in shallow excavations, and in deep (300 meters below the surface) tunnels and mines in fault zones. The 2-microns fractions in these fault gouges may compose a few percent to more than fifty percent of the total mass in the outcrops, and the mineralogy of the 2-microns fractions consists of a variety of clays (the common ones are montmorillonite, illite, kaolinite, chlorite, vermiculite and mixed-layer clays) and some quartz, feldspars, etc.Although we cannot yet conclude directly from the studies of gouges that similar gouges exist at depths where many large shallow earthquakes are generated, there is a strong possibility that they do, based on (1) available equilibrium data on various clays — for example, kaolinite has been found to exist at 4 kb and 375°C (±15°C) (Thompson, 1970) and montmorillonite + kaolite has been found to exist at 450°C and 4 kb (Velde, 1969); (2) the compatibility of laboratory velocity data in gouge (Wang et al., 1977) with those in a model for central California (Healy andPeake, 1975); (3) the capability of clays to undergo sudden earthquake-like displacements (Summers andByerlee, 1977); (4) the petrology of intrafault cataclastic rocks in old fault zones (Kasza, 1977); and (5) the compatibility of gouge mineralogy with the mineralogy of hydrothermal clay deposits.If clay gouges are indeed significant components of the fault zone at depth, then the mechanical properties of clays under confining pressures up to 4 kb are important in the behavior of faults. Very few experiments have been performed under such high pressures. But from the physical makeup of clays, we can infer that (1) the range of possible behavior includes stable sliding with vermiculite and montmorillonite (asByerlee andSummers, 1977, have proven) to stick-slip-like behavior with kaolinite, chlorite, etc.; (2) the absence or presence of water will greatly affect the strengths of gouges — it is possible that water may reduce the strength of gouge to a fairly small value.  相似文献   

裂纹间动态相互作用的实验观测与理论分析──以共线剪切裂纹归并为例   总被引：8，自引：0，他引：8       下载免费PDF全文

李世愚  滕春凯 《地球物理学报》1998,41(1):79-89

本文以共线剪切裂纹的归并为例,研究裂纹系的动态相互作用．实验结果表明：在张破裂的意义上,小间距共线剪切裂纹的内端部实际上是阻碍结构,通过迂回弯曲的张破裂归并．本文提出一种估计张破裂扩展途径的近似方法,利用张应力破裂判据找出了潜在的破裂扩展途径的第一近似,较好地模拟了共线裂纹的破裂途径,和现有的数值模拟方法比较,可以大大缩短机时,简化计算程序,保证精确度．本研究结出了岩石剪切破裂“隧道效应”（即破裂跳过障碍体,而障碍体本身不破坏）的机理,还给出了脆性介质在摩擦、磨损过程中碎屑产生的机理．  相似文献   

Remarks on the Definition and Estimation of Friction Velocity   总被引：3，自引：1，他引：2  

Rudolf O. Weber 《Boundary-Layer Meteorology》1999,93(2):197-209

One of the mainscaling parameters in similarity theory of the atmospheric boundary layer is friction velocity. Unfortunately, several definitions of friction velocity exist in the literature. Some authors use the component of the horizontal Reynolds stress vector in the direction of the mean wind vector to define friction velocity. Others define the friction velocity by means of the absolute value of the horizontal Reynolds stress vector. The two definitions coincide only if the direction of the mean wind vector is parallel to the horizontal Reynolds stress vector. In general, the second definition gives larger values for the friction velocity. Over complex terrain the situation is further complicated by the fact that the terrain following flow is not necessarily horizontal. Thus, several authors have proposed to use terrain following coordinate systems for the definition of friction velocity. By means of a large dataset of fast-response wind measurements with an ultrasonic anemometer the friction velocities resulting from the different definitions are compared. Furthermore, it is shown that friction velocity can be well estimated from horizontal wind speed, and even better from simple horizontal or vertical turbulence parameters.  相似文献   

Influence of surface roughness of dune bedforms on flow and turbulence characteristics     

《国际泥沙研究》2020,35(6):666-678

The current paper investigates the flow and turbulence characteristics over dune bedforms by means of laboratory experiments, where spatially dense and temporally high frequency velocity measurements were done. Although similar studies are available in the literature, the focus and novelty of the current study is to assess the influence of surface roughness of the dune bedforms on the nearbed flow. For direct comparison, two different surface roughness heights over idealized, fixed-shaped, high-angled dune bedforms were tested; one with a hydraulically-smooth surface, and the other with a fully-rough surface. Spatial variation of time-averaged flow as well as turbulence statistics were examined, which was complemented by streamline plots and spectral analyses. The results are interpreted from sediment entrainment and sediment transport points of view. The results show that increased dune surface roughness reduces the nearbed flow velocity, but increases the flow velocities at upper regions. The upward directed flow near the dune crests becomes stronger in the case of smooth surface, while the re-attachment point moves further downstream compared to the rough wall case. It is concluded that the roughness of the dune surface affects the nearbed flow and turbulence characteristics qualitatively and quantitatively, which is shown to have direct consequences on sediment entrainment characteristics.  相似文献   

Constitutive relations for fault slip and earthquake instabilities   总被引：1，自引：0，他引：1  

James R. Rice 《Pure and Applied Geophysics》1983,121(3):443-475

Constitutive relations for fault slip are described and adopted as a basis for analyzing slip motion and its instability in the form of earthquakes on crustal faults. The constitutive relations discussed include simple rate-independent slip-weakening models, in which shear strength degrades with ongoing slip to a residual frictional strength, and also more realistic but as yet less extensively applied slip-rate and surface-state-dependent relations. For the latter the state of the surface is characterized by one or more variables that evolve with ongoing slip, seeking values consistent with the current slip rate. Models of crustal faults range from simple, single-degree-of-freedom spring-slider systems to more complex continuous systems that incorporate nonuniform slip and locked patches on faults of depth-dependent constitutive properties within elastic lithospheric plates that may be coupled to a viscoelastic asthenosphere. Most progress for the rate and state-dependent constitutive relations is at present limited to single-degree-of-freedom systems. Results for stable and unstable slip with the various constitutive models are summarized. Instability conditions are compared for spatially uniform versus nonuniform slip, including the elastic — brittle crack limit of the nonuniform mode. Inferences of constitutive and fracture parameters are discussed, based on earthquake data for large ruptures that begin with slip at depth, concentrating stress on locked regions within a brittle upper crust. Results of nonlinear stability theory, including regimes of complex sustained stress and slip rate oscillations, are outlined for rate and state-dependent constitutive relations, and the manner in which these allow phenomena like time-dependent failure, restrengthening in nearly stationary contact, and weakening in rapidly accelerated slip, is discussed.  相似文献   

Micromechanics of the velocity and normal stress dependence of rock friction   总被引：1，自引：0，他引：1  

Weibin Wang  Christopher H. Scholz 《Pure and Applied Geophysics》1994,143(1-3):303-315

Among the second-order effects on friction the most important are those of variable normal stress and of slip velocity. Velocity weakening, which is usually considered the source of the stick-slip instability in rock friction, has been observed in velocity stepping experiments with Westerly granite. The friction change, , was –0.01 to –0.008 for a tenfold velocity increase. Using normal closure measurements, we observed dilation upon each increase in sliding rate. We also observed, for the first time, time-dependent closure between surfaces during static loading. The dilation that occurred during the velocity stepping experiment was found to be that expected from the static time-dependent closure phenomenon. This change in closure was used to predict friction change with an elastic contact model. The calculated friction change which results from a change in contact area and asperity interlocking, is in good agreement with the observed velocity dependence of steady-state friction. Variable normal stress during sliding has two effects, first in creating new partial slip contacts and locking some existing fully sliding contacts and second in increasing interlocking, for instance when normal load is suddenly increased. As a result, a transient change in friction occurs upon a sudden change in normal load.  相似文献   

The impact of the friction of distance on the early settlement and development of Eyre Peninsula,South Australia     

Derek. L. Smith 《The Australian geographer》1992,23(2):149-163

The cost of overcoming distance has played and continues to play an important role in the evolution of Australia's space‐economy. This paper examines the impact of the ‘friction of distance’, as well as the quality of the resource base, on the settlement and development of Eyre Peninsula in South Australia. A series of maps portraying the spread of pastoralism and then agriculture on Eyre Peninsula reveals clearly the importance of ‘accessibility’ in influencing the pattern and timing of settlement. It was not until well into this century that all the potentially agricultural land in the interior was occupied, for this required the construction of a railway and water pipeline up the centre of the peninsula.  相似文献   

黄土高原复杂地形受中尺度运动影响的稳定边界层湍流特征   总被引：1，自引：0，他引：1       下载免费PDF全文

梁捷宁  张镭  鲍婧  赵世强  黄建平  张武 《大气科学》2013,37(1):113-123

利用兰州大学半干旱气候与环境观测站(Semi-Arid Climate and Environment Observatory of Lanzhou University,简称SACOL)2008年12月观测资料,研究了稳定边界层湍流特征.使用涡动相关资料研究湍流通量时,定义湍流的平均时间τ内的中尺度运动是造成湍流统计量变化范围大的主要原因,稳定情形? τ取几十秒至几分钟.对梯度理查森数大于0.3的强稳定情形的湍流尺度分解(MRD)谱分析表明,感热通量在112.4～449.9 s存在谱隙,尺度大于谱隙的中尺度运动造成了通量观测资料离散性大,甚至有支配性影响.动量通量的谱隙在112.4～224.9 s之间.弱风时,中尺度运动的影响更大,垂直风速标准差以0.1的比率随中尺度风速变化;垂直风速标准差同广义风速表现出很好的相关性,并随着广义风速消失而消失.三维风速标准差与摩擦速度呈很好的线性关系,垂直、水平、横风风速的无量纲标准差分别为1.35、2.54、2.21.对湍流动能的研究发现,在梯度理查森数大于0.3的条件下,仍然存在连续的湍流.以湍动能为依据,分析了湍流的平稳时间长度,其长度随稳定度变化而变化,2008年12月7～11日从133.5 s变化到856.2 s,湍流平稳时间长度反映了中尺度运动的发生频率.  相似文献