Development of a 3D GIS and its application to karst areas   总被引：1，自引：0，他引：1  

Qiang Wu  Hua Xu  Wanfang Zhou 《Environmental Geology》2008,54(5):1037-1045

There is a growing interest in modeling and analyzing karst phenomena in three dimensions. This paper integrates geology, groundwater hydrology, geographic information system (GIS), database management system (DBMS), visualization and data mining to study karst features in Huaibei, China. The 3D geo-objects retrieved from the karst area are analyzed and mapped into different abstract levels. The spatial relationships among the objects are constructed by a dual-linker. The shapes of the 3D objects and the topological models with attributes are stored and maintained in the DBMS. Spatial analysis was then used to integrate the data in the DBMS and the 3D model to form a virtual reality (VR) to provide analytical functions such as distribution analysis, correlation query, and probability assessment. The research successfully implements 3D modeling and analyses in the karst area, and meanwhile provides an efficient tool for government policy-makers to set out restrictions on water resource development in the area.  相似文献   

三倍体合浦珠母贝不育性研究     

何毛贤  林岳光  姜卫国 《热带海洋学报》1996,(2)

对三倍体合浦珠母贝Ｐｉｎｃｔａｄａｍａｒｔｅｎｓｉｉ（Ｄ．）春、秋两繁殖盛期的生殖腺进行了组织学观察，并对其配子形成及受精、发育进行了研究。结果表明：合浦珠母贝三倍体的生殖腺发育差，生殖细胞数量少，极少个体能见到成熟卵母细胞和精子；三倍体的配子能完成受精作用，能发育至直线铰合期。配子多为非整倍体，其染色体数目多为１４—２８，胚胎染色体数目主要为２８—４２，故胚胎不能正常发育。因此，三倍体合浦珠母贝是不育的．  相似文献   

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay     

槐文信  T.  Komatsu  曾小辉 《中国海洋工程》2005,19(4):601-612

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.  相似文献   

Modelling nitrogen and phosphorus cycles and dissolved oxygen in the Zhujiang Estuary Ⅰ. Model development   总被引：1，自引：0，他引：1  

Guan Weibing  Wong Lai-Ah  Xu Dongfeng 《海洋学报(英文版)》2001,20(4):493-504

wrmcrloxHuman activities related to the population growth and developrnent of industry and rnwhci-pality have led to the incrouing hadings of various POllutants into estudries during the past fewdecades. These increasing edlutant lOadings have caused declined estuallne hedth which can bemereured by a vdriety of indices. In order to obtain solutions to environrnent problerns, re-sources manageTnnt apencies are supporting a holistic approach to envirorirnental management.An effcient strategy t…  相似文献   

Numerical Study on Instantaneous Discharge of Unsorted Particle Cloud in Cross Flow     

顾杰  李志伟杨红 詹咏 《中国海洋工程》2007,21(2):305-316

The mixing characteristics of particles such as dredged sediment of variable size discharged into cross flow are studied by a 3D numerical model, which is developed to model the particle-fluid two-phase flow. The Eulerian method with the modified k-ε parameterization of turbulence for the fluid phase is used to solve fluid phase, while a Lagrangian method for the solid phase (particles), both the processes are coupled through the momentum sources. In the model the wake turbulence induced by particles has been included as additional source term in the k-ε model; and the variable drift velocities of the particles are treated efficiently by the Lagrangian method in which the particles are tracked explicitly and the diffusion process is approximated by a random walk model. The hydrodynamic behavior of dumping a cloud of particles is governed by the total buoyancy of the cloud, the drag force on each particle and the velocity of cross-flow. The computed results show a roughly linear relationship between the displacement of the frontal position and the longitudinal width of the particle cloud. The particle size in the cloud and the velocity of cross flow dominate the flow behavior. The computed results are compared with the results of laboratory experiments and satisfactory agreement is obtained.  相似文献   

东营城区高精度三维地震采集方法研究   总被引：3，自引：0，他引：3  

胡立新  刘怀山  张进 《中国海洋大学学报(自然科学版)》2004,34(6):1075-1080

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。  相似文献   

桶形基础平台三维有限元稳定性分析     

钱荣  周锡礽  孙克俐  张伟 《海洋技术学报》2003,22(4):49-53

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。  相似文献   

亚像素定位的关键问题研究   总被引：1，自引：0，他引：1  

王成亮  邹峥嵘  闾海庆  王静 《海洋测绘》2007,27(1):70-73

分析了控制点标志的选择与设计,采用了图像处理、Hough变换、角点与直线高精度定位算子等方法,实现了中南大学近景摄影测量二维控制场1 350个人工标志点的自动识别和亚像素定位,仿真图检测平均精度达到±0.05像素。  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

3D gravity modelling for Anyongbok Seamount in the East Sea     

Moo Hee Kang  Hyun-Chul Han  Hyesu Yun  Gee Soo Kong  Kyong O. Kim  Youn Soo Lee 《Marine Geophysical Researches》2007,28(3):257-269

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.  相似文献