宁夏灵武幅、磁窑堡幅综合地质调查LS01孔冲洗液护壁技术          下载免费PDF全文

何玉云  王发民 《探矿工程》2020,47(1):31-35

宁夏灵武幅、磁窑堡幅综合地质调查LS01孔设计深度800 m，钻探过程中钻遇200余米第四系未胶结松散地层，主要有砾石（漂砾）—粗砂—中砂—细砂互层，钻孔护壁难度大，容易发生掉块、塌孔事故，取心困难；进入第三系钻遇清水营组紫红色泥岩，地层造浆且易打滑；进入白垩系宜君组，钻遇365.91 m的破碎砾岩，地层松散破碎，钻进过程易卡钻，回转阻力大，回次进尺少，进尺慢。根据类似钻孔施工资料及地层情况最终采用成膜护壁冲洗液，钻进过程中穿过多层复杂地层，成膜护壁冲洗液在破碎砾岩孔段起到了很好的护壁效果，没有出现掉块、塌孔事故；岩心采取率满足地质设计要求，全孔平均采取率达到95.89%；节约了套管下入深度，终孔深度800 m，终孔口径124.00 mm。  相似文献   

潮页1井钻探施工技术          下载免费PDF全文

王世炬  刘昕伟  王烁  徐明曙  纪卫军 《探矿工程》2020,47(10):33-37

潮页1井是在潮水盆地布置的第一口页岩气资源调查井，取心质量要求较高，地层有大段泥页岩层段，易水化剥落，施工难度大。本文着重介绍了潮页1井取心工艺、钻头选型、冲洗液技术及井斜控制技术等相关的施工经验。潮页1井采用大口径绳索取心技术，第四系地层以深全井取心，该技术在甘肃地区鲜有可供参考的施工案例，而该井岩心采取率接近90%。钻进过程中通过选用合理的钻进参数和护壁性能较强的冲洗液体系，解决了施工中遇到的地层“打滑”、井壁稳定性差等技术难点，保障了潮页1井的顺利完工。  相似文献   

干热岩钻探关键技术探索   总被引：1，自引：0，他引：1       下载免费PDF全文

王勇军  代娜  郑宇轩 《山东国土资源》2019,35(2)

干热岩是国际公认的高效低碳清洁能源,近年来,随着国家对清洁能源勘探开发的提倡和支持,国内开展了一些干热岩勘探工作。干热岩钻探是前期获取地质资料进行资源量计算及后期开发利用的关键部分。现阶段国内在干热岩钻探工艺技术方面还没有形成体系,大多借用石油钻井行业及地质钻井行业的一些工艺技术,但干热岩钻探钻遇地层温度普遍较高,且大部分孔段均为坚硬的花岗岩地层,因此如何在高温环境下保持钻井液性能,保证其携带岩屑及维护孔壁稳定的功效,在坚硬的花岗岩层中如何提高钻进效率,实现高效钻进,钻遇破碎地层时如何维护孔壁稳定,实现护壁堵漏等问题,该文结合国内已施工的部分干热岩钻探工程,对国内干热岩钻探所采取的工艺技术进行了探索,研制了抗高温配方的钻井液,使用转盘回转+孔底动力钻具复合钻进,在钻井液中加入抗高温封堵剂,可有效提高干热岩钻探效率,以期促进干热岩钻探工艺技术的研究、应用和推广。  相似文献   

文克尔地基模型下液化土桩基水平振动响应分析     

熊辉  杨丰 《岩土力学》2020,41(1):103-110

在桩基顶部承受竖向荷载作用的条件下，将完全液化后的上层土体视为流体，将桩基等效为欧拉-伯努利梁模型，探讨了桩底嵌固时桩基顶部的水平振动阻抗。运用流体动力方程模拟顶部液化土层的运动，运用文克尔地基模拟下部非液化分层土的运动。结合传递矩阵法，利用液化土与非液化分层土交界面处的位移、转角和内力连续条件，得到桩基顶部和底部的相关位移?内力表达关系式。根据桩基底部的嵌固条件，求得桩顶阻抗的表达式。与已有文献解进行对比，验证了分析过程的正确性。对阻抗影响条件进行参数分析，表明液化深度、轴力和流体密度大小对桩顶阻抗有不同的影响。  相似文献   

地质钻探废弃冲洗液污染特性及脱稳技术研究          下载免费PDF全文

张统得  蒋炳  严君凤 《探矿工程》2020,47(4):134-139

废弃冲洗液无害化处理是落实绿色勘查理念的一项重要工作。通过室内测试分析与现场调研，对地质钻探不同领域的钻孔废弃冲洗液进行污染特性研究，了解其基本性质以及对环境的影响方式。结合湘桃地2井废弃冲洗液开展脱稳技术室内研究，对破胶剂及絮凝剂进行了优选，并获得了脱稳处理的基础配方。实验结果表明，经过处理后废弃冲洗液能实现快速脱稳絮凝，COD、悬浮物、色度等污染指标大幅下降，为下一步深度处理实现无害化排放创造了有利条件。  相似文献   

斑岩型和浅成低温热液型矿床成矿流体与找矿预测研究:以华南若干典型矿床为例     

倪培  迟哲  潘君屹 《地学前缘》2020,27(2):60-78

斑岩型和浅成低温热液型矿床是全球铜、钼、金、银的主要来源之一,具有重要经济价值。这两类矿床之间通常存在紧密的时空关系,对其成矿流体性质和演化的解剖不仅有利于探究金属沉淀机制,也有助于揭示两者之间的内在成因联系。本文在综述国内外重要研究前沿基础上,以中国华南富家坞斑岩型铜钼(金)矿、桐村斑岩钼矿,以及邱村和安村浅成低温热液金矿为例,系统总结了斑岩型和浅成低温热液型矿床流体特征、演化规律和金属沉淀机制、探讨了从斑岩型到浅成低温热液型流体演化的“气相迁移”模型,并以福建紫金山铜金矿床为例,介绍了应用流体填图进行找矿预测的实例。  相似文献   

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin     

Ardiansyah Koeshidayatullah  Hilary Corlett  Jack Stacey  Peter K. Swart  Adrian Boyce  Hamish Robertson  Fiona Whitaker  Cathy Hollis 《Sedimentology》2020,67(6):2945-2973

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献   

Solid–fluid transition modelling in geomaterials and application to a mudflow interacting with an obstacle     

Noémie Prime  Frédéric Dufour  Félix Darve 《国际地质力学数值与分析法杂志》2014,38(13):1341-1361

Given the contrasting behaviour observed for geomaterials, for example, during landslides of the flow type, this contribution proposes an original constitutive model, which associates both an elasto‐plastic relation and a Bingham viscous law linked by a mechanical transition criterion. This last is defined as the second‐order work sign for each material point, which is a general criterion for divergence instabilities. Finite element method with Lagrangian integration points is chosen as a framework for implementing the new model because of its well‐known ability to deal with both solid and fluid behaviours in large deformation processes. A first boundary model considering a sample of initially stable soil, a slope and an obstacle is performed. The results show the power of the constitutive model because the consistent evolution of initiation, propagation and arrest of the mudflow is described. A parametric study is led on various plastic and viscous parameters to determine their influence on the flow development and arrest. Finally, forces against the obstacle are compared with good agreement with those of other authors for the same geometry and a pure viscous behaviour. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

粤东北桃源铀矿床黄铁矿地球化学特征及其地质意义     

李海东  田世洪  江卫兵  祁家明  刘斌  孙中瑞  彭渤洋 《地质论评》2021,67(3):67040022-67040022

粤东北桃源铀矿床位于华南铀成矿省武夷山铀成矿带,其矿床成因、成矿物理化学环境特征等还未开展深入研究。黄铁矿的地球化学特征往往能够有效地反映其形成时的地球化学环境。桃源铀矿床中黄铁矿与沥青铀矿成因关系密切。因此笔者在野外地质调查和岩相学基础上,利用LA- ICP- MS原位分析技术,对桃源矿床黄铁矿主、微量元素开展研究。结果表明：①黄铁矿主量元素w（Fe）=41.64% ~ 49.39%,平均值为45.83%;w（S）=50.56% ~ 57.62%,平均值为53.73%,w（Fe）/w（S）=0.73 ~ 0.98,平均值为0.85,表明其形成环境是一个微弱缺铁,相对富硫的相对封闭的地球化学环境;②黄铁矿中相对富集Si、Na、Al、K、Ca、Cr、Co、Ni、Ti、Cu、Ge、As、Se、Bi、Pb等微量元素;③绝大多数微量元素与主量元素Fe、S无明显线性关系,表明在黄铁矿形成过程中,这些微量元素的地球化学行为除受到类质同象因素的影响外,还受其他因素影响;④成矿元素U与部分微量元素显示出较好的正相关关系,其中Na、Ti等元素含量高表明与铀矿物在空间上紧密相关的黄铁矿形成于成矿早期的碱性热液蚀变阶段,而非成矿期,要早于铀成矿时间,并为铀成矿提供还原剂;⑤黄铁矿内部微裂隙发育,成矿期铀矿物容易进入其中,从而引起裂隙附近铀矿含量升高。伴随的高含量As表明其形成于中低温热液环境。  相似文献   

鄂尔多斯盆地延安地区山西组山2段储层可动流体赋存影响因素分析     

刘江斌 《地质与勘探》2021,57(1):231-240

山2段是鄂尔多斯盆地延安地区致密砂岩气生产的重要层段,目前对其流体赋存规律认识明显不足。因此在铸体薄片、扫描电镜、X射线衍射、高压压汞、恒速压汞、核磁共振测试的基础上,分析该储层可动流体的赋存特征及其影响因素。结果表明:山2储层主要为岩屑石英砂岩和岩屑砂岩,溶蚀孔和晶间孔为主要储集空间,粒间溶孔显著发育。山2储层可动流体饱和度为34.74%～91.83%,平均为69.94%,T2谱多为双峰态,呈左低右高型。储层孔隙度、渗透率、孔隙类型、孔喉特征及胶结物影响可动流体饱和度。孔隙为可动流体提供主要空间,平均孔隙半径越大,平均喉道半径越大,孔喉比越小,可动流体饱和度越高。硅质含量越高,粒间孔保存越好,可动流体饱和度越高。铁方解石含量越高,孔隙破坏越明显,可动流体饱和越低。高岭石含量较高,长石溶孔及晶间孔发育较好,有利于流体流动,可动流体饱和度也较高。  相似文献