Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress     

Wenqian Dong  Xiuqing Hu  Hongtao Fu 《Marine Georesources & Geotechnology》2020,38(7):770-785

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.  相似文献   

辛安煤矿1402工作面临空窄煤柱采掘响应及动态加固     

汪北方  梁冰  刘维  张晶  迟海波  刘亚辉 《煤田地质与勘探》2020,48(1):145-153

随着我国煤炭资源去产能整合煤矿的增多，复采工作面临空窄煤柱采动失稳问题日益凸显，已严重制约矿井安全高效生产。为此，针对辛安煤矿复采1402工作面辅运巷道5号钻场临空窄煤柱稳定性控制的工程难题，运用数值模拟与理论分析相结合的方法，探究5号钻场临空窄煤柱稳定性采掘扰动响应特征，提出5号钻场临空窄煤柱动态注浆加固技术方案并开展现场应用和效果检验。研究结果表明:1402工作面辅运巷道掘进对5号钻场临空窄煤柱稳定性影响较小；在1402工作面回采期间，距5号钻场18~6 m范围，临空窄煤柱集中垂直应力由非对称马鞍形分布逐渐过渡为拱形分布；距5号钻场6 m时，临空窄煤柱承载叠加垂直应力超过煤体强度，塑性区完全贯通，极易破坏失稳；现场采用MP364型注浆材料及专用注浆设备对5号钻场临空窄煤柱前后5 m区域进行加固，动态注浆始终超前工作面10 m，通过深孔窥视和气体监测手段验证临空窄煤柱良好的封堵固化效果，保障了工作面安全回采，为我国整合矿井类似条件下煤柱稳定性控制提供借鉴和参考。移动阅读   相似文献   

A plasticity constitutive model for unsaturated,anisotropic, nonexpansive soils     

Panagiotis Sitarenios  Michael Kavvadas 《国际地质力学数值与分析法杂志》2020,44(4):435-454

The paper describes and evaluates an incremental plasticity constitutive model for unsaturated, anisotropic, nonexpansive soils (CMUA). It is based on the modified Cam-Clay (MCC) model for saturated soils and enhances it by introducing anisotropy (via rotation of the MCC yield surface) and an unsaturated compressibility framework describing a double dependence of compressibility on suction and on the degree of saturation of macroporosity. As the anisotropic and unsaturated features can be activated independently, the model is downwards compatible with the MCC model. The CMUA model can simulate effectively: the dependence of compressibility on the level of developed anisotropy, uniqueness of critical state independent of the initial anisotropy, an evolving compressibility during constant suction compression, and a maximum of collapse. The model uses Bishop's average skeleton stress as its first constitutive variable, favouring its numerical implementation in commercial numerical analysis codes (eg, finite element codes) and a unified treatment of saturated and unsaturated material states.  相似文献   

断层附近地应力扰动带宽度及其影响因素   总被引：3，自引：3，他引：0  

翁剑桥  曾联波  吕文雅  刘奇  祖克威 《地质力学学报》2020,26(1):39-47

在建立正断层模型的基础上，利用三维有限元数值模拟方法研究了断层附近地层中的地应力变化规律。其结果表明，由于断层活动，在断层附近普遍发育应力扰动带；在应力扰动带范围内，地应力方向和大小发生明显的变化，断层中部附近应力值普遍较低，而断层端部的应力值通常异常增大。应力扰动带的分布范围主要受断层规模的控制，与断裂带的岩石力学性质、断层走向、断层面形态和边界应力条件等因素也密切相关。随断层长度和断距逐步增大，应力扰动带的宽度相应增加。断裂带的岩石越破碎，其岩石弹性模量越低，断层对地应力的影响宽度越大。断层走向与区域最大水平主应力方向越接近垂直、断距与断层长度的比值越大，区域内的差应力越大，则扰动带宽度与断层规模的比值也越大。选择渤海湾盆地BZ-X油田进行验证，在建立油田实际三维地质模型基础上，根据边界应力条件，利用三维有限元方法对沙河街组二段的地应力分布进行了数值模拟计算。根据断层周围的地应力变化，确定了应力扰动带的分布范围，断层附近应力扰动带宽度的分布规律与正断层模型分析结果相一致。   相似文献   

Unified numerical study of shallow foundation on structured soft clay under unconsolidated and consolidated-undrained loadings     

Santosh Kumar Yadav  Guan-lin Ye  Usama Khalid 《Marine Georesources & Geotechnology》2020,38(4):400-416

Abstract

Based on a new elasto-plastic constitutive model, this paper presents a soil–water coupled numerical prediction of the bearing capacity for shallow foundation constructed on Ballina soft clay for unconsolidated undrained (UU) and consolidated undrained (CU) conditions. This elasto-plastic constitutive Shanghai model has an advantage of describing the mechanical behaviour of over-consolidated and structured soil under different loading and drainage conditions, by using one set of material parameter. In this paper, the Shanghai model used for both UU and CU conditions has the same initial parameters obtained from laboratory test results. The loading conditions and consolidation stages vary based on construction details. The predicted bearing pressure-settlement responses for UU and CU, approves the field observation. The phenomenon of gaining the bearing capacity due to consolidation is captured and explained by the use of soil–water coupled numerical analysis with a new elasto-plastic model. The stress strain behaviour, stress paths and the decay of the structure of elements at different depths presented in this study, reveal the mechanism for the difference between UU and CU conditions to understand the foundation behaviour. Effect of the initial degree of soil structure on the bearing capacity is also addressed. Overall, this approach provides the integrated solution for the shallow foundation design problems under short and long-term loadings.  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献   

2017年九寨沟M_S7.0地震对周围地区的静态应力影响          下载免费PDF全文

靳志同  万永革  刘兆才  黄骥超  李瑶  杨帆 《地球物理学报》2019,62(4):1282-1299

基于九寨沟M_S7.0地震的破裂模型及均匀弹性半空间模型，本文计算了该地震在周围主要活动断层上产生的库仑应力变化、在周围地区产生的应力场和位移场和同震库仑应力变化对余震的触发.结果表明：（1）九寨沟地震造成虎牙断裂中段库仑破裂应力有较大增加，已经超过0.01 MPa的阈值，虎牙断裂北段、塔藏断裂中段和岷江断裂北段北部的库仑破裂应力有较大降低，因此尤其要注意虎牙断裂中段的危险性.（2）水平面应力场在该地震震中东西两侧增加（拉张），张应力起主要作用.在震中南北两侧降低（压缩），压应力起主要作用.从水平主压和主张应力方向来看，均呈现出条形磁铁的磁场形态.从剖面上的应力场来看，在上盘的面膨胀区域内，大部分点的主张应力方向与地表是垂直的，在其他区域内，主张应力和主压应力均以震中为中心，向外呈辐射状.（3）从地表水平位移场来看，震中东西两侧物质朝震中位置汇聚，南北两侧物质向外流出，在震中处的最大水平位移量达43 mm.从地表垂直位移场来看，震中南北两侧出现明显的隆升，隆升最大值达56.8 mm.震中东西两侧出现明显的沉降，沉降最大值达74.5 mm.从剖面的位移场来看，九寨沟地震为左旋走滑地震，且有一定的正断成分.由分析可以推测该断层破裂在大致22~26 km的深度上就截止了.并推测下盘物质运动的动力来自震源北东东方向（四川块体）深度在6~30 km的下盘下层物质，上盘物质运动的动力来自震源北西西方向（巴颜喀拉块体）深度在0~6 km的上盘上层物质.（4）通过计算不同深度上主震对余震的触发作用可知，主震后的最大余震受到了主震的触发作用，多数其他余震也受到主震的触发作用.主震的发生促使了库仑应力增加地区余震的发生，抑制了一部分库仑应力减少地区余震的发生.  相似文献   

滇西北地区近年来应力场的数值模拟研究     

武永彩  李昂  唐红涛 《大地测量与地球动力学》2018,38(12):1238-1240

建立滇西北地区三维有限元地质模型，将2009~2016年GPS速度场数据作为数值模拟的位移边界条件，模拟获取该地区的构造应力场。结果表明，在楚雄至滇西北地区整体显示张性应力区；出现由“洱源鹤庆断裂-红河断裂-程海断裂”圈起的低值张性区，区域内部张性应力明显低于外部，这种张应力低值区尤其在区域四周断裂边界处，往往是地壳断裂活动的频发区；曲江断裂北端及元谋-绿汁江断裂南端出现张性应力集中区，是今后重点关注的断裂结点。  相似文献   

多氯联苯(Aroclor 1242)胁迫下鲤鱼肝脏组织氧化应激   总被引：1，自引：0，他引：1  

王仁君  王建国  丁宁  孙萌  高配科 《海洋与湖沼》2018,49(6):1286-1293

本文在实验室条件下通过静态水质染毒方式在生理生化和转录水平上探究了我国重要经济鱼种鲤鱼(Cyprinus carpioio)对多氯联苯Aroclor 1242的氧化应激:鲤鱼肝脏组织抗氧化酶[超氧化物歧化酶(SuperoxideDismutase,SOD)和过氧化氢酶(Catalase,CAT)]活性、脂质过氧化产物丙二醛(Malonydialdehyde,MDA)含量、相关抗氧化酶编码基因(Cu/Zn-SOD、Mn-SOD、CAT)、应激蛋白HSP70、转录因子Nrf2和芳烃受体AhR2基因表达。结果表明:Aroclor 1242胁迫下,鲤鱼肝脏组织抗氧化酶活性表现出低浓度促进高浓度抑制的趋势;肝脏组织丙二醛含量显著升高,其中390μg/L暴露组鲤鱼肝脏组织MDA含量在第6d高于对照组92.1%(P0.01),表明肝脏组织发生脂质过氧化,膜系统受到损伤;鲤鱼肝脏组织中Cu/Zn-SOD、Mn-SOD、CAT、HSP70、Nrf2和AhR2编码基因表达出现不同程度下调。本文从酶学和基因转录水平上揭示了Aroclor1242胁迫下鲤鱼肝脏组织细胞的氧化应激。  相似文献   

A stress and displacement discontinuity element method for elastic transversely anisotropic rock     

A. Bobet  V. García Marín 《国际地质力学数值与分析法杂志》2014,38(18):1898-1922

The paper presents closed‐form solutions for stress and displacement influence functions for stress discontinuity (SD) and displacement discontinuity (DD) elements, for a two‐dimensional plane‐strain elastic, transversely anisotropic medium. The solutions for SD elements are based on Kelvin's problem and for DD elements on the concept of dipoles. Stress and displacement influence functions are derived for the following elements: constant SD, linear SD, constant DD, linear DD, square root DD, parabolic DD, constant DD surface, and linear DD surface elements. The formulations are incorporated into FROCK, a hybridized boundary element method code, and are validated by providing comparisons between the results from FROCK and the finite element code ABAQUS. A limited parametric analysis shows the effects of slight anisotropy on the stress field around the tip of a crack and of the orientation of the crack with respect to the axes of elastic symmetry. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献