排序方式： 共有49条查询结果，搜索用时 15 毫秒
41.
The paper presents an incremental plasticity constitutive Model for Structured Soils (MSS–2) to describe the effects of structure (stress history and bonding) on the mechanical behaviour of cohesive soils. Such effects are high initial stiffness, dilatancy and peak strength, their appreciable reduction upon strain-induced de-structuring and the evolution of material anisotropy. The proposed model advances present practice in incremental elasto-plasticity for structured soils by incorporating: (a) distorted ellipsoids, rotated with respect to the isotropic axis, for the Structure Strength Envelope (bounding surface) and the Plastic Yield Envelope (yield surface) to describe the evolution of structure and anisotropy, (b) an Intrinsic Compressibility Framework and a corresponding Intrinsic Strength Envelope which represents a lower bound of the Structure Strength Envelope and is used as reference locus for the structureless material, (c) an improved damage mechanism to model structure degradation by plastic strains and (d) a non-associated flow rule controlled by structure. The proposed model is modular, its features can be activated simultaneously or selectively, and the 3-D tensorial formulation facilitates direct implementation in finite elements codes. 相似文献
42.
在工程条件下(常温、中低围压),岩石塑性变形和损伤变量的微观机制都是岩石构元中微裂纹的萌生和发育,因而塑性变形与损伤在岩石材料中应是同时出现的,它们的演化规律应是相互耦合的。在此基础上本文建立了岩石材料弹塑性损伤本构模型的理论框架。在这个框架中,由于损伤的出现,塑性变形率与屈服面是非正交的,而最后得到的本构矩阵具有对称性。非正交性与通常的实验资料一致。本构矩阵的对称性对数值分析和理论研究都是至关重要的。 相似文献
43.
We report quantitative results from three brittle thrust wedge experiments, comparing numerical results directly with each other and with corresponding analogue results. We first test whether the participating codes reproduce predictions from analytical critical taper theory. Eleven codes pass the stable wedge test, showing negligible internal deformation and maintaining the initial surface slope upon horizontal translation over a frictional interface. Eight codes participated in the unstable wedge test that examines the evolution of a wedge by thrust formation from a subcritical state to the critical taper geometry. The critical taper is recovered, but the models show two deformation modes characterised by either mainly forward dipping thrusts or a series of thrust pop-ups. We speculate that the two modes are caused by differences in effective basal boundary friction related to different algorithms for modelling boundary friction. The third experiment examines stacking of forward thrusts that are translated upward along a backward thrust. The results of the seven codes that run this experiment show variability in deformation style, number of thrusts, thrust dip angles and surface slope. Overall, our experiments show that numerical models run with different numerical techniques can successfully simulate laboratory brittle thrust wedge models at the cm-scale. In more detail, however, we find that it is challenging to reproduce sandbox-type setups numerically, because of frictional boundary conditions and velocity discontinuities. We recommend that future numerical-analogue comparisons use simple boundary conditions and that the numerical Earth Science community defines a plasticity test to resolve the variability in model shear zones. 相似文献
44.
Geo-hazard assessment of the potential damage to a pipeline caused by a submarine landslide requires a quantitative model to evaluate the impact forces on the pipeline. In contrast with typical geotechnical problems, the strain rate within the fast moving, flow-like submarine landslide is typically far higher, which will lead to enhancement of the soil strength and therefore result in larger impact forces. Generally, there are two possible predictive frameworks for strain-rate dependence: a fluid dynamics framework and a geotechnical framework. By comparison of common rheological models adopted in these two different approaches, a unified additive power-law model, a normalised form of the Herschel-Bulkley model from fluid mechanics, is explored in this paper. This model has been used in conjunction with a large deformation finite element approach to investigate the undrained limiting loads on a cylinder moving steadily through inertia-less soft rate-dependent material, in order to quantify the strain-rate effects.The flow mechanism and the effects of the shear-thinning index and Oldroyd number on the shear zones are explored. The calculated resistance factors are compared with the drag coefficients obtained from computational fluid dynamics analysis. The average rate of strain experienced by the soil flowing past the cylinder is estimated for a given flow velocity and an expression in the form of a conventional bearing capacity equation, but with shear strength linked directly to the normalised flow velocity, is proposed to predict the magnitude of the viscous force exerted by the debris flow. 相似文献
45.
Vertical uplift resistance of circular plate anchors in clays under undrained condition 总被引：3，自引：0，他引：3
The vertical uplift resistance of circular plate anchors, embedded horizontally in a clayey stratum whose cohesion increases linearly with depth, has been obtained under undrained ( = 0) condition. The axi-symmetric static limit analysis formulation in combination with finite elements proposed recently by the authors has been employed. The variation of the uplift factor (Fc) with changes in the embedment ratio (H/B) has been computed for several rates of increases of soil cohesion with depth. It is noted that in all the cases, the magnitude of Fc increases continuously with depth up to a certain value of Hcr/B beyond which the uplift factor becomes essentially constant. The proposed static limit analysis formulation is seen to provide acceptable results even for the two other simple chosen axi-symmetric problems. 相似文献
46.
The liquefaction of clayey soils under cyclic loading 总被引：4，自引：0，他引：4
This paper seeks to investigate the liquefaction of clayey soils, a phenomenon that has been the trigger for many natural disasters in the last few decades, including landslides. Research was conducted on artificial clay-sand mixtures and natural clayey soils collected from the sliding surfaces of earthquake-induced landslides. The undrained response of normally consolidated clayey soils to cyclic loading was studied by means of a ring-shear apparatus. For the artificial clay-sand mixtures, it was found that the presence of a small amount of bentonite (≤ 7%) would cause rapid liquefaction, while a further increase in bentonite content (≥ 11%) produced the opposite effect of raising soil resistance to liquefaction by a significant degree. It was demonstrated that the bentonite-sand mixture was considerably more resistant to liquefaction than the kaolin-, and illite-mixtures, given the same clay content. The test results of plastic soils revealed the significant influence of plasticity on the liquefaction resistance of soil. The microfabric of clayey soil was investigated by means of a scanning electron microscope. The analysis showed that the liquefaction potential of soil was strongly related to certain particle arrangements. For example, soil vulnerable to liquefaction had an open microfabric in which clay aggregations generally gathered at the sand particle contact points, forming low-strength “clay bridges” that were destroyed easily during cyclic loading. On the other hand, the microfabric of soil that was resistant to liquefaction appeared to be more compact, with the clay producing a matrix that prevented sand grains from liquefying. In the case of the natural soils, the obtained results indicated that their cyclic behavior was similarly influenced by factors such as clay content, clay mineralogy and plasticity. The relation between the liquefaction potential of natural soil and its microfabric was thus also established. On the basis of the obtained results, the authors posited an explanation on the mechanism of liquefaction for clayey soil. 相似文献
47.
Disconnected piled raft foundations are characterised by no structural connection between the upper raft and the underlying piles, mostly playing the role of settlement-reducers. The resulting raft–pile gap is usually filled with a granular interlayer, through which the loads from the superstructure are transferred to the piles.In this paper, the complex interaction mechanisms involving the foundational components (raft, piles and soil) are numerically investigated by means of 3D finite elements analyses, accounting for soil non-linearity. The main features of the soil–structure interaction mechanisms under purely vertical external loads are explored over a realistic range of raft–soil gaps for different pile configurations, in which the number of piles – i.e. their spacing – is varied. Special attention is also devoted to the structural response of the piles in terms of axial and bending internal stress resultants. In particular, while disconnection beneficially affects the structural pile response, increasing the raft–pile gap tends to reduce the overall settlement/stiffness efficiencies.The numerical results being presented are in substantial agreement with the outcomes from literature small-scale experiments and suggest a number of relevant theoretical inferences. 相似文献
48.
粉土、粘性土的渗透系数受土的结构构造、矿物成分、颗粒级配等因素影响,而这些影响因素可在土性指标(尤其是塑性指数IP)上得到集中体现。基于常州地区土的室内渗透系数K与塑性指数IP试验数据,初步建立了粘性土、粉土渗透系数K与塑性指数IP间的地区经验关系,对常州地区土的渗透系数的确定具有参考意义。 相似文献
49.
Vertically loaded anchors offer an attractive alternative for mooring systems because of their relatively high efficiency and low cost. The bridle shank is an important feature of these anchors because its reconfiguration significantly affects their performance. A plasticity model considering a bridle shank is introduced to investigate the mechanism of the system. Model-based parametric studies on the effects of the bridle length, drag distance and anchor line angle are also conducted. These studies establish a new, more rational analytical model for these anchors, as well as contribute to the understanding of the mechanism of them in research and practice. 相似文献