Groundwater recharge sources in semiarid irrigated mountain fronts     

Houssne Bouimouass  Younes Fakir  Sarah Tweed  Marc Leblanc 《水文研究》2020,34(7):1598-1615

High-elevation mountains often constitute for basins important groundwater recharge sources through mountain-front recharge processes. These processes include streamflow losses and subsurface inflow from the mountain block. However, another key recharge process is from irrigation practices, where mountain streamflow is distributed across the irrigated piedmont. In this study, coupled groundwater fluctuation measurements and environmental tracers (¹⁸O, ²H, and major ions) were used to identify and compare the natural mountain-front recharge to the anthropogenically induced irrigation recharge. Within the High Atlas mountain front of the Ourika Basin, Central Morocco, the groundwater fluctuation mapping from the dry to wet season showed that recharge beneath the irrigated area was higher than the recharge along the streambed. Irrigation practices in the region divert more than 65% of the stream water, thereby reducing the potential for in-stream groundwater recharge. In addition, the irrigation areas close to the mountain front had greater water table increases (up to 3.5 m) compared with the downstream irrigation areas (<1 m increase). Upstream crops have priority to irrigation with stream water over downstream areas. The latter are only irrigated via stream water during large flood events and are otherwise supplemented by groundwater resources. These changes in water resources used for irrigation practices between upstream and downstream areas are reflected in the spatiotemporal evolution of the stable isotopes of groundwater. In the upstream irrigation area, the groundwater stable isotope values (δ¹⁸O: −8.4‰ to −7.4‰) reflect recharge by the diverted stream water. In the downstream irrigation area, the groundwater isotope values are lower (δ¹⁸O: −8.1‰ to −8.4‰) due to recharge via the flood water. In the nonirrigation area, the groundwater has the highest stable isotope values (δ¹⁸O: −6.8‰ to −4.8‰). This might be due to recharge via subsurface inflow from the mountain block to the mountain front and/or recharge via local low altitude rainfall. These findings highlight that irrigation practices can result in the dominant mountain-front recharge process for groundwater.  相似文献   

Influence of a coarse interlayer on seawater intrusion and contaminant migration in coastal aquifers          下载免费PDF全文

Yi Liu  Xiaomin Mao  Jian Chen  D. A. Barry 《水文研究》2014,28(20):5162-5175

Vertical 2D slice laboratory experiments were carried out in homogenous and layered sand tanks to elucidate the effects of a highly permeable (coarse‐grained sand) interlayer on seawater intrusion and transport of contaminants to a coastal sea. Tidal fluctuations produced oscillations in the seawater–freshwater transition zone, fluctuations of the contaminant infiltration rate and a zigzag contaminant plume outline. The seawater wedge became discontinuous at the (vertical) edges of the interlayer because of increased lateral movement of the seawater–freshwater interface within the interlayer. The contaminant plume formed a tail within the interlayer depending on the tidal stage, and similar to the wedge, its movement was accentuated. A simple analytical model that neglected vertical flow reliably predicted steady‐state seawater intrusion into the coastal aquifer. Numerical modeling was used to gain insight into the groundwater hydrodynamics and contaminant migration. The numerical results confirmed the experimental findings, i.e. that a highly permeable interlayer can provide a rapid transit path for contaminants to reach the seaward boundary and that the interlayer amplifies the effects of tidal fluctuations, resulting in wider transition zones for the seawater wedge and contaminant plume. Numerical simulations further showed that, with increasing interlayer hydraulic conductivity, the maximum seawater intrusion distance inside the interlayer increases approximately linearly. For the fixed‐head contaminant injection condition used, the model showed that contaminant infiltration increases approximately logarithmically with increasing interlayer hydraulic conductivity (other factors held fixed). Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Cartographic Symbol Design Considerations for the Space–Time Cube     

Christopher League 《The Cartographic journal》2019,56(2):117-133

The cartographic representation of geographic phenomena in the space–time cube comes with special challenges and opportunities when compared with two-dimensional maps. While the added dimension allows the display of attributes that vary with time, it is difficult to display rapidly varying temporal data given the limited display height. In this study, we adapt 2D cyclic point symbols to construct 3D surfaces designed along a helical path for the space–time cube. We demonstrate how these complex?3D helical surfaces can display detailed data, including data reported daily over 100 years and data reported in four-hour intervals over a year. To create the point symbols, each value is plotted along the curve of a helix, with each turn of the helix representing one year or week, respectively. The model is modified by varying the radii from the time axis to all points using the attribute value, in these cases maximum daily temperature and four-hourly ridership, and then creating a triangulated surface from the resulting points. Using techniques common to terrain representation, we apply hue and saturation to the surface based on attribute values, and lightness based on relief shading. Multiple surfaces can be displayed in a space–time cube with a consistent time interval facing the viewer, and the surfaces or viewer perspective can be rotated to display synchronized variations. We see this method as one example of how cartographic design can refine or enhance operations in the space–time cube.  相似文献   

Re-examining urban region and inferring regional function based on spatial–temporal interaction     

Haiyan Tao  Keli Wang  Xuliang Li 《International Journal of Digital Earth》2019,12(3):293-310

Urban system is shaped by the interactions between different regions and regions planned by the government, then reshaped by human activities and residents’ needs. Understanding the changes of regional structure and dynamics of city function based on the residents’ movement demand are important to evaluate and adjust the planning and management of urban services and internal structures. This paper constructed a probabilistic factor model on the basis of probabilistic latent semantic analysis and tensor decomposition, for purpose of understanding the higher order interactive population mobility and its impact on urban structure changes. First, a four-dimensional tensor of time (T)?×?week (W)?×?origin (O)?×?destination (D) was constructed to identify the day-to-day activities in three time modes and weekly regularity of weekday/weekend pattern. Then we reclassified the urban regions based on the space clustering formed by the space factor matrix and core tensor. Finally, we further analysed the space–time interaction on different time scales to deduce the actual function and connection strength of each region. Our research shows that the application of individual-based spatial–temporal data in human mobility and space–time interaction study can help to analyse urban spatial structure and understand the actual regional function from a new perspective.  相似文献   

Urban re-generations: afterword to special issue on the politics of urban greening in Australian cities     

Donna Houston 《The Australian geographer》2020,51(2):257-263

ABSTRACT

‘Urban re-generations' is written as an afterword to the special issue of Australian Geographer on ‘The Politics of Urban Greening in Australian Cities'. The collection prompts a deep questioning of reparative and regenerative work associated with greening, green spaces and green infrastructures. The climate-driven 2019-2020 bushfire crisis and COVID-19 have amplified the visibility of the more-than-human connectivity of our cities and the deep underlying structures of social and environmental inequity underpinning a variety of urban green spaces and agendas. Inspired by the articles in this special issue, the afterword explores how we might call back the grammars and practices of regeneration from their service to the neo-liberal, settler-colonial city and instead nurture reparative de-colonial practices that aid in the collaborative work of re-composing, becoming into better relation with, and working in modes of situated historical and cultural difference, with green and just cities.  相似文献   

Modeling nonlinear wave–wave interactions with the elliptic mild slope equation     

《Applied Ocean Research》2014

An approach is developed to simulate wave–wave interactions using nonlinear elliptic mild-slope equation in domains where wave reflection, refraction, diffraction and breaking effects must also be considered. This involves the construction of an efficient solution procedure including effective boundary treatment, modification of the nonlinear equation to resolve convergence issues, and validation of the overall approach. For solving the second-order boundary-value problem, the Alternating Direction Implicit (ADI) scheme is employed, and the use of approximate boundary conditions is supplemented, for improved accuracy, with internal wave generation method and dissipative sponge layers. The performance of the nonlinear model is investigated for a range of practical wave conditions involving reflection, diffraction and shoaling in the presence of nonlinear wave–wave interactions. In addition, the transformation of a wave spectrum due to nonlinear shoaling and breaking, and nonlinear resonance inside a rectangular harbor are simulated. Numerical calculations are compared with the results from other relevant nonlinear models and experimental data available in literature. Results show that the approach developed here performs reasonably well, and has thus improved the applicability of this class of wave transformation models.  相似文献   

A novel approach for estimating karst groundwater recharge in mountainous regions and its application in Switzerland          下载免费PDF全文

Arnauld Malard  Michael Sinreich  Pierre‐Yves Jeannin 《水文研究》2016,30(13):2153-2166

A pragmatic and simple approach for estimating the groundwater recharge of karst aquifers in mountainous regions by extrapolation of the hydrological regimes of gauged and well‐documented systems is presented. Specific discharge rates are derived using annual precipitation and spring measurements by taking into account catchment size and elevation, which are assumed to be the dominant factors. Reference sites with high data reliability are used for calibration and regional extrapolation. This is performed with normalized values employing spatial precipitation deviations and correlation with the elevation of the catchment areas. A tiered step procedure provides minimum and maximum normalized gradients for the relationship between recharge quantity and elevation for karst regions. The normalized recharge can therefore be obtained and extrapolated for any location using the spatial precipitation variability to provide an estimate of annual groundwater recharge. The approach was applied to Switzerland (approximately 7500 km² of karst terrain situated between 200 and over 4000 m a.s.l.) using annual precipitation data from meteorological stations for the years 2000 to 2011. Results show that the average recharge rates of different Swiss karst domains range from 20 to 46 L/km²s, which corresponds to an infiltration ratio between 0.6 and 0.9 of total precipitation. Despite uncertainties inherent in the approach, these results provide a benchmark for renewable karst groundwater resources in Switzerland of about 8.4 km³/year. The approach can be applied to any other mountainous karst region, that is, where a clear relationship between elevation, precipitation and recharge can be assumed. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

CFD modelling of a small–scale fixed multi–chamber OWC device     

《Applied Ocean Research》2019

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.  相似文献   

Complex hydraulic interactions between compartmentalized carbonate aquifers and heterogeneous siliciclastic successions: a case study in southern Italy          下载免费PDF全文

D. Aquino  E. Petrella  M. Florio  P. Celico  F. Celico 《水文研究》2015,29(19):4252-4263

The sedimentary sequences containing lithologic units with low permeability represent hydrogeologic systems, which, as of now, have been little studied despite their diffusion worldwide. A hydrogeologic study, aimed to assess the main factors controlling the groundwater flow dynamics in such systems and their hydraulic interactions with nearby carbonate aquifers, has been carried out in Longano (Isernia, Southern Italy). The analysis of the hydraulic heads, combined with the regimes of the springs and the electric conductivity of the groundwater, mainly reflect vertical and lateral heterogeneities of the media in terms of hydraulic properties. In particular, the flow system is controlled by lateral heterogeneities, which characterize a surficial horizon made up of clayey colluviums and talus deposits, separated from the deeper saturated, fissured bedrock. One‐to‐ten relationships in hydraulic heads, monitored in piezometers crossing the fissured media, further uphold the crucial role played by the lateral contrasts of permeability in controlling the flow dynamics. On the whole, significant interactions with the nearby carbonate hydrostructure take place. Nevertheless, the heterogeneities of the siliciclastic succession and surficial horizon, coupled with the compartmentalization of the carbonate system, lead to a complex hydrogeological scenario. In a wider perspective, this study gives information of utmost importance in order to improve the implementation of mathematical models and configuration of tapping works within these heterogeneous and complex settings. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Groundwater mixing between different aquifer types in a complex structural setting discerned by elemental and stable isotope geochemistry          下载免费PDF全文

Dorina Murgulet  Marlon Cook  Valeriu Murgulet 《水文研究》2016,30(3):410-423

Karst aquifers are well known for their intricate stratigraphy and geologic structures, which make groundwater characterization challenging because flowpaths and recharge sources are complex and difficult to evaluate. Geochemical data, collected from ten closely spaced production wells constructed in two karst aquifers (Bangor Limestone (Mb) and Tuscumbia Limestone/Fort Payne Chert (Mftp)) in Trussville, north‐central Alabama, illustrate two distinctive groundwater end‐members: (1) higher major ion, dissolved inorganic carbon, conductivity, alkalinity concentrations, heavier δ¹³C ratios (max: −10.2 ± 0.2‰ Vienna Pee Dee Belemnite (PDB)) and lower residence times (mean: 19.5 ± 2 years, n = 2) of groundwater in the Mb aquifer and (2) lower constituent concentrations, lighter δ¹³C ratios (min: −13.4 ± 0.2‰ PDB) and longer residence times of groundwater (mean: 23.6 ± 2 years, n = 4) in the Mftp aquifer. Summer and fall data and the binary mixing model show aquifer inter‐flow mixing along solution fractures and confirms the distinctive groundwater geochemistry of the two aquifers. Lowering of static water levels over the summer (drawdown from 2 to 5.2 m) leads to more reducing groundwater conditions (lower Eh values) and slightly enriched δ¹⁸O and δD ratios during the fall [δ¹⁸O: −4.8 ± 0.1 to −5.4 ± 0.1‰ Vienna Standard Mean Oceanic Water (VSMOW), n = 9; δD: −25.4 ± 1 to −27.4 ± 1‰ VSMOW, n = 9] when compared with summer season samples (δ¹⁸O: −5.1 ± 0.1 to −5.7 ± 0.1‰ VSMOW, n = 11; δD: −25.0 ± 1 to −30.6 ± 1‰ VSMOW, n = 11). GIS analyses confirm the localized origin of recharge to the investigated aquifers. The combination of GIS, field parameters and geochemistry analyses can be successfully used to identify recharge sources, evaluate groundwater flow and transport pathways and to improve understanding of how groundwater withdrawals impact the sustainability and susceptibility to contamination of karst aquifers. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献