黏土中两种不同直径单桩水平循环加载模型试验与分析     

俞剑  黄茂松  张陈蓉 《岩土力学》2016,37(4):973-980

为探讨海上风机在风、浪等水平往复循环荷载下大直径单桩基础的循环弱化特性,设计了稳定输出长期循环荷载的机械加载装置,开展了软黏土中长期水平循环荷载下海上风电大直径单桩基础和传统长桩基础的模型试验对比研究。根据API给出的骨干曲线和Masing二倍准则构建循环荷载下的p-y（荷载-位移）曲线,并借鉴前人工作,采用累积塑性应变描述软黏土的不排水抗剪强度弱化,提出了分析大周数水平循环荷载下单桩基础循环弱化的理论方法。该方法将循环荷载次数、幅值等外界条件与桩周土体的循环弱化特性建立联系,以适应海洋环境复杂多变的水平循环荷载形式。通过模型试验和理论研究认为,大直径单桩基础因刚度较大,在同样的水平力循环荷载条件下,其抵抗循环荷载的能力明显优于传统长桩。在海上风机大直径单桩的设计中采用基于黏土残余强度的循环后稳定水平承载力更为合理。  相似文献   

花岗岩残积土填料路用工程特性室内试验研究     

尹松  孔令伟  杨爱武  穆坤 《岩土力学》2016,37(Z2):287-293

为了研究花岗岩残积土的路用工程特性,通过击实试验、承载比CBR试验、固结试验以及室内基床系数试验分析了该类材料压实性能及基本力学特性,对压实度为92%的最优含水率和饱和压实土样进行了循环加载试验,研究了动力荷载作用下土体的变形特性。结果表明,花岗岩残积土在K为91%～97%时压实功效率较高,提高压实度对于增强土体局部抗变形能力较为有效;采用室内三轴法得到的基床系数K30值为188.25 MPa/m;最优含水率下花岗岩残积土动力变形稳定性较好,但含水率增加会大幅度增加土体塑性变形,降低土的动弹性模量,不利于变形稳定。所以作为路堤填料,应考虑作为受气候与动荷载影响较小的下路堤备用填料,作为铁路路堤本体及公路上、下路路床填料,应在进行土性改良且满足要求的论证基础上取舍。研究成果可为花岗岩残积土填料的工程应用及土体改良提供技术参考。  相似文献   

基于Ls-Dyna的高能射流式冲击器活塞杆回程应力分析     

王福平  李鹏  李国琳  彭枧明 《吉林大学学报(地球科学版)》2016,46(5):1482-1489

针对在钻探实践中高能射流式冲击器的活塞杆频繁出现尾部塑性变形严重影响冲击器工作性能和整体寿命的现象,拟对活塞杆进行优化改进。利用非线性动力学仿真软件Ls-Dyna对活塞杆的回程撞击缸体进行数值模拟和优化分析,并进行了室内试验,结果表明：冲击末速度为4 m/s,活塞杆回程撞击缸体强制停止运动瞬间,尾部产生的应力集中值为3 339.28 MPa,导致其破坏;优化改进后,活塞杆上下端直径比为17/16、尾部圆弧直径为60 mm,活塞杆体内的应力集中值为1 419.66 MPa,较改进前活塞杆的应力集中值减小58%。试验验证表明,优化后的活塞能大幅提高使用寿命和耐久性。  相似文献   

Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elastic–plastic soil constitutive model     

Ha H. Bui  Ryoichi Fukagawa  Kazunari Sako  Shintaro Ohno 《国际地质力学数值与分析法杂志》2008,32(12):1537-1570

Simulation of large deformation and post‐failure of geomaterial in the framework of smoothed particle hydrodynamics (SPH) are presented in this study. The Drucker–Prager model with associated and non‐associated plastic flow rules is implemented into the SPH code to describe elastic–plastic soil behavior. In contrast to previous work on SPH for solids, where the hydrostatic pressure is often estimated from density by an equation of state, this study proposes to calculate the hydrostatic pressure of soil directly from constitutive models. Results obtained in this paper show that the original SPH method, which has been successfully applied to a vast range of problems, is unable to directly solve elastic–plastic flows of soil because of the so‐called SPH tensile instability. This numerical instability may result in unrealistic fracture and particles clustering in SPH simulation. For non‐cohesive soil, the instability is not serious and can be completely removed by using a tension cracking treatment from soil constitutive model and thereby give realistic soil behavior. However, the serious tensile instability that is found in SPH application for cohesive soil requires a special treatment to overcome this problem. In this paper, an artificial stress method is applied to remove the SPH numerical instability in cohesive soil. A number of numerical tests are carried out to check the capability of SPH in the current application. Numerical results are then compared with experimental and finite element method solutions. The good agreement obtained from these comparisons suggests that SPH can be extended to general geotechnical problems. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Numerical simulation of fully saturated porous materials     

Boris Jeremić  Zhao Cheng  Mahdi Taiebat  Yannis Dafalias 《国际地质力学数值与分析法杂志》2008,32(13):1635-1660

Fully coupled, porous solid–fluid formulation, implementation and related modeling and simulation issues are presented in this work. To this end, coupled dynamic field equations with u?p?U formulation are used to simulate pore fluid and soil skeleton (elastic–plastic porous solid) responses. Present formulation allows, among other features, for water accelerations to be taken into account. This proves to be useful in modeling dynamic interaction of media of different stiffnesses (as in soil–foundation–structure interaction). Fluid compressibility is also explicitly taken into account, thus allowing excursions into modeling of limited cases of non‐saturated porous media. In addition to these features, present formulation and implementation models in a realistic way the physical damping, which dissipates energy. In particular, the velocity proportional damping is appropriately modeled and simulated by taking into account the interaction of pore fluid and solid skeleton. Similarly, the displacement proportional damping is physically modeled through elastic–plastic processes in soil skeleton. An advanced material model for sand is used in present work and is discussed at some length. Also explored in this paper are the verification and validation issues related to fully coupled modeling and simulations of porous media. Illustrative examples describing the dynamical behavior of porous media (saturated soils) are presented. The verified and validated methods and material models are used to predict the behavior of level and sloping grounds subjected to seismic shaking. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Numerical simulation of ductile shear localization: Plastic‐flow network and slip‐line field     

Sheng‐zu Wang  Jun‐xiu Sun  Jie‐yuan Ning 《国际地质力学数值与分析法杂志》2008,32(3):307-324

  相似文献   

Finite elements modelling of the long‐term behaviour of a full‐scale flexible pavement with the shakedown theory     

Cyrille Chazallon  Fatima Allou  Pierre Hornych  Saida Mouhoubi 《国际地质力学数值与分析法杂志》2009,33(1):45-70

  相似文献   

Multiscale approach to geo‐composite cellular structures subjected to rock impacts     

François Nicot  Philippe Gotteland  David Bertrand  Stéphane Lambert 《国际地质力学数值与分析法杂志》2007,31(13):1477-1515

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

华北平原某集约化种植区地下水污染探讨   总被引：2，自引：0，他引：2       下载免费PDF全文

刘瑾  费宇红  张兆吉  李亚松  崔向向  雷廷  吴国庆 《地球学报》2014,35(2):197-203

以华北平原某集约化种植区为典型研究区域,通过对采集的8个地下水样品及11个土壤样品分析,探讨集约化种植区地下水的污染程度,解析其污染影响机制。结果表明:该集约化种植地区土壤中残留物主要为有机氯农药,多环芳烃及邻苯二甲酸酯类有机化合物。地下水中硝酸盐含量显著增加;重金属中以Cr含量最高,但均未超标;地下水并未受到有机氯农药的污染,但仍显示有多氯联苯的输入;半挥发性有机物检出种类较多,其中残留农膜释放的邻苯二甲酸酯类有机化合物浓度最高;地下水已受到较为严重的污染。集约化种植区大量施用化肥、农药和覆盖农膜,污染负荷严重,灌溉频繁且量大,污染质运移驱动力大是地下水污染的根本原因;当地包气带中黏性土厚度不均以及井孔止水不严等因素也成为了地下水受到污染的直接原因。  相似文献   

The second order characteristic condition for plastic flow     

Graham Weir  Roger Young 《国际地质力学数值与分析法杂志》2003,27(15):1299-1316

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献