近15a陕西省植被时空变化与影响因素分析          下载免费PDF全文

岳辉  刘英 《干旱区地理》2019,42(2):314-323

利用2000—2014年MODIS/NDVI时间序列数据，采用栅格像元趋势分析、稳定性评价的方法，研究了陕西省近15 a植被的时空变化特征和规律；利用Hurst指数对陕西省植被未来变化趋势进行了预测；并利用相关性分析法分析了NDVI与年均温度和降雨量的关系。结果表明，2000年、2015年陕西省NDVI均值分别为0.4273、0.4942， 15 a来增加了0.067，增长了16.0%，其中陕北地区NDVI增加明显，关中部分地区出现负增长，陕南地区NDVI总体依旧维持在较高水平。陕西省植被变化趋势具有明显的空间差异性，全省植被未变化的占52.0 %，改善部分占44.27 %，退化部分占3.73%，说明15 a间陕西省植被覆盖改善面积大于退化面积，植被状况有所改善；其中陕北地区植被呈明显改善区域面积较大，关中地区植被覆盖面积有所减少，陕南地区植被变化幅度较小。陕西省植被稳定区域占50%以上（0 0.2)，说明15a间陕西省植被较为稳定，变化程度不大；其中陕西省植被最稳定地区主要集中在陕南、延安南部，榆林部分、西安、渭南少部地区变化幅度较大。Hurst指数分析表明陕西省44.54%面积的植被未来有可能面临退化，主要分布在陕北和关中地区的北部，植被未来有可能退化也有可能改善的面积占49.78%，主要分布在延安和陕南地区。陕西省近15 a气温和降水量总体呈增加趋势，增加速率分别为0.48 ℃·(10 a)-1和69.5 mm ( a)-1；相关性分析结果表明，年均降雨量是影响NDVI的主要气象因子，同时陕西省植被变化也受到了退耕还林还草、防沙治沙、生态政治等人为因素的影响。  相似文献   

不同结构林带防风效能风洞模拟     

李晓烨  王克俭  谷建才  刘启国  崔严 《中国沙漠》2019,39(6):118-125

防风林带结构是影响防风效能的主要因素。建立不同宽度、不同株行距林带防风效能与林带后距离之间的统计模型，可以为防风林建设提供指导性意见。通过风洞实验，在11 m·s^-1风速下，对4种宽度、5种株行距林带的背风面0~10H（H为林带高度）的风速进行测定，采用曲线参数估计法、傅立叶模型、SSF模型（Sum of Sin Functions），构建了不同结构林带防风效能与林带后距离间的统计模型。结果表明：傅立叶模型拟合不同宽度林带的防风效能与林带后距离的关系效果最优，可决系数（R²）均在98%以上；SSF模型拟合不同株行距林带的防风效能与林带后距离的关系效果最优（R²>0.98）。根据构建的统计模型，风速为11 m·s^-1左右时，林带宽度8 m（两行一带）的防风林的防风效能存在明显优势；5种株行距的林带中，株行距为8 m×8 m的防风林带本试验条件下防风效果最好。  相似文献   

闽中南平—宁化构造带南华纪陆缘弧岩浆活动：对武夷造山带构造演化的新启示     

姜杨  赵希林  李龙明  潘桂棠  徐敏成  黄文成  刘欢 《中国地质》2020,47(4):1010-1024

南平—宁化构造带沿线出露着以万全岩群和楼前组、西溪组等为代表的一系列新元古代火山-沉积岩系。系统的岩石学、年代学和地球化学研究表明,福建明溪和江西瑞金地区的楼前组浅变质英安岩和晶屑凝灰岩分别形成于(729±4)Ma和(735±6.7)Ma(LA-ICP-MS锆石U-Pb法),SiO2含量变化在65.22%～74.54%,相对富Al2O3(11.05%～16.80%)富碱(Na2O+K2O=4.88%～10.19%)而贫CaO、MgO和FeOT,ANK值和A/CNK值分别为1.23～1.78和0.98～1.57,Nb/Ta=12.44～17.28,Nd/Th=2.07～3.51,Ti/Zr=6.08～10.37,Ti/Y=68.51～154.71,属过铝质S型火山岩;明显富集大离子亲石元素(Ba、Rb等)而亏损高场强元素(Nb、Ta、Ti、P等),Zr/Nb=16.65～24.07,Th/Ta=12.94～16.93,δEu呈现明显负异常(0.33～0.62),显示岛弧岩浆岩的地球化学特征。综合区域地质资料及前人研究结果提出,南平—宁化一线在713 Ma前为活动大陆边缘环境,洋壳俯冲引发的岩浆活动形成了沿南平—宁化—瑞金一线展布的陆缘弧中酸性火山岩带,暗示此时南、北武夷之间尚未拼合形成统一的武夷地块,因而华夏地块不存在统一的前南华纪结晶基底。  相似文献   

Are carbonate barrier islands mobile? Insights from a mid to late-Holocene system,Al Ruwais,northern Qatar     

John Rivers  Max Engel  Robert Dalrymple  Ruqaiya Yousif  Christian J. Strohmenger  Ismail Al-Shaikh 《Sedimentology》2020,67(1):534-558

Barrier islands are important landforms in many coastal systems around the globe. Studies of modern barrier island systems are mostly limited to those of siliciclastic realms, where the islands are recognized as mobile features that form on transgressive coastlines and migrate landward as sea-level rises. Barrier islands of the ‘Great Pearl Bank’ along the United Arab Emirates coast are the best-known carbonate examples. These Holocene islands, however, are interpreted to be anchored by older deposits and immobile. The mid-Holocene to late-Holocene depositional system at Al Ruwais, northern Qatar, provides an example of a mobile carbonate barrier island system, perhaps more similar to siliciclastic equivalents. Sedimentological and petrographic analyses, as well as ¹⁴C-dating of shells and biogenic remains from vibracored sediments and surface deposits, show that after 7000 years ago a barrier system with a narrow back-barrier lagoon formed along what is now an exposed coastal zone, while, contemporaneously, a laterally-extensive coral reef was forming immediately offshore. After 1400 years ago the barrier system was forced to step ca 3 km seaward in response to a sea-level fall of less than 2 m, where it re-established itself directly on the mid-Holocene reef. Since that time, the barrier has retreated landward as much as 1000 m to its current position, exposing previously-deposited back-barrier lagoonal sediment at the open-coast shoreline. In modern neritic warm-water carbonate settings mobile barrier island systems are rare. Their construction and migration may be inhibited by reef formation, early cementation, and the relative inefficiency of sourcing beach sediments from open carbonate shelves. Carbonate barrier island systems likely formed more commonly during geological periods when ramps and unrimmed shelves predominated and in calcite seas, when meteoric cementation was minimized as a result of initial calcitic allochem mineralogy. As with their siliciclastic analogues, however, recognition of the influence of these transient landforms in the rock record is challenging.  相似文献   

西藏甲玛铜多金属矿床磁黄铁矿标型矿物学特征及其地质意义   总被引：2，自引：0，他引：2  

杨阳  唐菊兴  吴纯能  林彬  唐攀  张泽斌  何亮  祁婧  李怡萱 《矿床地质》2020,39(2):337-350

甲玛矿床位于冈底斯成矿带东段,是西藏地区最大的铜多金属矿床之一。磁黄铁矿是甲玛矿床最常见的金属矿物之一,其标型特征不仅反映其自身形成环境,对其形成机制和矿床成因也具有指示意义。文章选取产于不同岩性中的磁黄铁矿矿石样品,利用矿相学、X射线衍射和电子探针分析等手段对磁黄铁矿的形态、成分和结构进行了分析研究。研究表明,甲玛矿床的磁黄铁矿主要分布在距离岩体中心较远的矿区远端矽卡岩和角岩中。磁黄铁矿的晶胞参数和粉晶X射线衍射曲线显示矽卡岩中的磁黄铁矿主要为高温六方磁黄铁矿,角岩中的磁黄铁矿为高温六方磁黄铁矿和低温单斜磁黄铁矿的交生体,但主要以低温单斜磁黄铁矿为主。通过对矽卡岩和角岩中的磁黄铁矿进行电子探针测试,结果显示:矽卡岩中的磁黄铁矿中w(Fe)为60.09%～60.71%,平均为60.38%,w(S)为38.18%～38.69%,平均38.35%,化学分子式为Fe_8S_9～Fe_(10)S_(11);角岩中的磁黄铁矿中w(Fe)为59.05%～59.57%,平均为59.10%,w(S)为39.28%～39.95%,平均39.59%,化学分子式为Fe_5S_6～Fe_7S_8。根据以上矿物学特征,笔者进一步探讨了该矿床磁黄铁矿的沉淀机制:炽热的岩浆热液上涌,与碳酸盐岩地层和碎屑岩地层接触发生相互作用,并有大气水的加入,使得成矿流体在角岩中先快速降温,形成高温六方磁黄铁矿和低温单斜磁黄铁矿的交生体。同时,大量的含矿热液形成,并充填于有利的成矿空间(主要为层间破碎带)沉淀成矿,形成矽卡岩矿体,然后流体在矽卡岩矿段中经历缓慢降温,形成高温六方磁黄铁矿。结合矿床地质特征和相关元素地球化学特征,认为甲玛矿床类型为斑岩-矽卡岩型。  相似文献   

修正的Neupert效应          下载免费PDF全文

于文慧  李友平  甘为群 《天文学报》2020,61(5):53

Neupert效应的定性描述是耀斑中脉冲分量(硬X射线、微波暴)与渐变分量(软X射线发射)之间存在的因果关系,即耀斑最初的能量是以加速粒子的形式释放,加速的电子在大气传输过程中产生非热硬X射线轫致辐射,并加热大气,耀斑软X射线发射是高能粒子注入大气的响应.根据经典Neupert效应的定量描述,硬X射线发射(表征非热电子注入)结束时软X射线应该立刻达到极大,但以往的观测发现一些耀斑软X射线峰值时间(t2)明显晚于硬X射线结束时间(t1)(τ=t2–t1,τ 0),热与非热辐射之间存在明显的偏离经典Neupert效应的情况.为了研究偏离经典Neupert效应的事件,在2002—2015年间的RHESSI (Reuven Ramaty High Energy Solar Spectroscopic Imager)和GOES (Geostationary Operational Environmental Satellites)耀斑列表中,按照在25–50 keV范围内光变较简单、软X射线有对应发射峰等判据,共选择276个耀斑样本,统计了这些耀斑的τ分布、环长d (用双足点源之间的距离来表征)与τ的关系.结果显示:(1)有227个耀斑τ 0,即有约82%的耀斑偏离经典Neupert效应;(2)τ与d之间存在一定的线性相关,即环越长,软X射线极大的时间越延后;(3)似乎存在一个临界距离,当环长小于临界距离时,经典Neupert效应成立.这些结果印证了修正Neupert效应的必要性,并对其物理意义进行了讨论.  相似文献   

Early Jurassic climatic trends in the south-Tethyan margin     

《Gondwana Research》2020

The Early Jurassic period was characterized by extreme environmental changes, as reflected by major global carbon isotope anomalies and abrupt changes in oxygen isotope and elemental records of marine organisms. Available data suggest an overall warm Early Jurassic climate interrupted by periods of severe cooling, with a climatic optimum during the early Toarcian. Available geochemical studies, however, have mainly focused on the northern margin of the Tethys Ocean, so that the palaeogeographic extent of these environmental perturbations, latitudinal palaeotemperature gradients and climate belt boundaries remain poorly constrained. Here we report the first stable isotope records of brachiopod shells (δ¹³C and δ¹⁸O values) from the Upper Sinemurian-Middle Toarcian interval in the southern margin of the Tethys Ocean (northwest Algeria). These data were used to better constrain the palaeoenvironmental evolution of the North Gondwana margin during the Early Jurassic, which likely played an important role on supra-regional climate. The diagenetic history of the analysed brachiopod shells was monitored using scanning electron microscopy, and elemental (manganese and strontium) compositions. The brachiopod δ¹³C and δ¹⁸O data show very similar trends as those reported for various Tethyan regions, and record negative carbon and oxygen isotope excursions near the Sinemurian–Pliensbachian and Pliensbachian–Toarcian transitions and during the Toarcian oceanic anoxic event (T-OAE). Despite these similarities, the carbon and oxygen isotope records are systematically offset towards more positive δ¹³C values (average +0.5‰) and more negative δ¹⁸O values (−1.0‰) compared to those obtained from sites of higher palaeolatitudes in the northern Tethyan margin. These offsets suggest a spatial heterogeneity in the stable isotope composition of dissolved inorganic carbon in the Early Jurassic Ocean and a marked latitudinal temperature gradient between the southern and northern margins of the Tethys.  相似文献   

A comparative study of energy performance of hydrostatic seafloor sediment samplers and a new high-efficiency sampler     

《Applied Ocean Research》2019

The hydrostatic energy of high-pressure seawater is a renewable and green energy source for ocean exploration and have been used to replace underwater electrical energy transmission through the cable and underwater battery pack to power seafloor equipment. The advantage of the energy supply method is the cost-effective and the robustness. In the paper, the energy performance of the existing hydrostatic seafloor sediment samplers powered by seawater hydrostatic energy are modelled and analyzed and compared. In view of the common shortcoming of existing technology, a novel hydrostatic seafloor sediment sampler is proposed. The model of energy conversion of the new sampler is built, and its energy performance is obtained. The analysis results indicate that the energy conversion efficiency of the novel sediment sampler is much higher than the existing ones, which means that the new sampler can collect much longer sample with the limited amount of hydrostatic energy. The seawater hydrostatic energy conversion system of the new sampler can also be used to power other seafloor equipment.  相似文献   

An efficient and robust approach to predict ship self-propulsion coefficients     

《Applied Ocean Research》2019

Achieving a reliable and accurate numerical prediction of the self-propulsion performance of a ship is still an open problem that poses some relevant issues. Several CFD methods, ranging from boundary element methods (BEM) to higher-fidelity viscous Reynolds averaged Navier–Stokes (RANS) based solvers, can be used to accurately analyze the separate problems, i.e. the open water propeller and the hull calm water resistance. However, when the fully-coupled self-propulsion problem is considered, i.e. the hull advancing at uniform speed propelled by its own propulsion system, several complexities rise up. Typical flow simplifications adopted to speed-up the simulations of the single analysis (hull and propeller separately) lose their validity requiring a more complex solver to tackle the fully-coupled problem. The complexity rises up further when considering a maneuver condition. This aspect increases the computational burden and, consequently, the required time which becomes prohibitive in a preliminary ship design stage.The majority of the simplified methods proposed in literature to include propeller effects, without directly solve the propeller flow, in a high-fidelity viscous solver are not able to provide all the commonly required self-propulsion coefficients. In this work, a new method to enrich the results from a body force based approach is proposed and investigated, with the aim to reduce as much as possible the computational burden without losing any useful result. This procedure is tested for validation on the KCS hull form in self-propulsion and maneuver conditions.  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献