捷联式航空重力扰动矢量解算及误差补偿     

郭栋  孙中苗  吴富梅  张琪 《大地测量与地球动力学》2018,38(12):1295-1301

介绍捷联式航空重力矢量测量的基本原理，利用波数相关滤波（WCF）、比力线性校正的方法对重力扰动的水平和垂向分量进行误差补偿，评定内符合精度。对国产捷联式航空重力矢量仪的某次试验数据进行处理，以验证和评估航空重力矢量仪的性能。结果表明，在半波长分辨率为7.5 km时，6条重复测线的重力扰动水平分量经波数相关滤波处理后，东、北向分量的平均内符合精度分别从9.77 mGal、9.18 mGal提高到5.95 mGal、3.83 mGal；对比力的垂向分量线性校正后，将解算的重力扰动垂向分量再用WCF方法处理，其平均内符合精度从1.27 mGal提高到0.59 mGal。  相似文献   

Robust dual‐sensor data sea‐surface ghost attenuation for quality control purposes          下载免费PDF全文

Philippe Caprioli  Ralf Ferber 《Geophysical Prospecting》2018,66(5):954-963

Three‐dimensional receiver ghost attenuation (deghosting) of dual‐sensor towed‐streamer data is straightforward, in principle. In its simplest form, it requires applying a three‐dimensional frequency–wavenumber filter to the vertical component of the particle motion data to correct for the amplitude reduction on the vertical component of non‐normal incidence plane waves before combining with the pressure data. More elaborate techniques use three‐dimensional filters to both components before summation, for example, for ghost wavelet dephasing and mitigation of noise of different strengths on the individual components in optimum deghosting. The problem with all these techniques is, of course, that it is usually impossible to transform the data into the crossline wavenumber domain because of aliasing. Hence, usually, a two‐dimensional version of deghosting is applied to the data in the frequency–inline wavenumber domain. We investigate going down the “dimensionality ladder” one more step to a one‐dimensional weighted summation of the records of the collocated sensors to create an approximate deghosting procedure. We specifically consider amplitude‐balancing weights computed via a standard automatic gain control before summation, reminiscent of a diversity stack of the dual‐sensor recordings. This technique is independent of the actual streamer depth and insensitive to variations in the sea‐surface reflection coefficient. The automatic gain control weights serve two purposes: (i) to approximately correct for the geometric amplitude loss of the Z data and (ii) to mitigate noise strength variations on the two components. Here, Z denotes the vertical component of the velocity of particle motion scaled by the seismic impedance of the near‐sensor water volume. The weights are time‐varying and can also be made frequency‐band dependent, adapting better to frequency variations of the noise. The investigated process is a very robust, almost fully hands‐off, approximate three‐dimensional deghosting step for dual‐sensor data, requiring no spatial filtering and no explicit estimates of noise power. We argue that this technique performs well in terms of ghost attenuation (albeit, not exact ghost removal) and balancing the signal‐to‐noise ratio in the output data. For instances where full three‐dimensional receiver deghosting is the final product, the proposed technique is appropriate for efficient quality control of the data acquired and in aiding the parameterisation of the subsequent deghosting processing.  相似文献   

RESEARCH ON PASSIVE SERVO SEISMIC ROTATIONAL ACCELERATION SENSOR WITH LARGE DAMPING     

QU Ming-zhe  GAO Feng  YANG Xue-shan  YANG Dong-xia 《地震地质》2018,40(5):1170-1178

Many strong motion records show that under the strong seismic vibration of, the torsional disfigurement of building structures is a common and serious damage. At present, there are no special sensors for measuring seismic rotation in the world. Most of the experts obtain rotational components through observing deformation, theoretical analysis and calculation. The theory of elastic wave and source dynamics also prove the conclusion that the surface of the earth will rotate when an earthquake occurs. Based on a large number of investigations and experiments, a rotational acceleration sensor was developed for the observation of the rotational component of strong ground motions. This acceleration sensor is a double-pendulum passive servo large-damped seismic rotational acceleration sensor with the moving coil transducer. When an earthquake occurs, the seismic rotational acceleration acts on the bottom plate at the same time. The magnetic circuit system and the middle shaft fixedly connected to the bottom plate follow the bottom plate synchronous vibration, and the moving part composed of the mass ring, the swing frame and the moving ring produces relative corners to the central axis. The two working coils mounted on the two pendulums produce the same relative motion with respect to the magnetic gaps of the two magnetic circuits. Both working coils at this time generate an induced electromotive force by cutting magnetic lines of force in the respective magnetic gaps. The generated electromotive forces are respectively input to respective passive servo large damper dynamic ring transducer circuits and angular acceleration adjusting circuits, and the signals are simultaneously input to the synthesizing circuit after conditioning. Finally, the composite circuit outputs a voltage signal proportional to the seismic rotational acceleration to form a seismic rotational acceleration sensor. The paper presents the basic principles of the rotational acceleration sensor, including its mechanical structure diagram, circuit schematic diagram and mathematical models. The differential equation of motion and its circuit equation are derived to obtain the expressions of the main technical specifications, such as the damping ratio and sensitivity. The calculation shows that when the damping ratio is much larger than 1, the output voltage of the passive servo large damping dynamic coil transducer circuit is proportional to the ground rotation acceleration, and the frequency characteristic of bandpass is wider when the damping ratio is larger. Based on the calibration test, the dynamic range is greater than or equal to 100dB and the linearity error is less than 0.05%. The amplitude-frequency characteristics, the phase-frequency characteristics and their corresponding curves of the passive servo rotational acceleration sensor are acquired through the calculations. Based on the accurate measurement of the micro-vibration of the precision rotating vibration equipment, the desired result is obtained. The measured data are presented in the paper, which verify the correctness of the calculation result. The passive servo large damping rotational acceleration sensor has simple circuit design, convenient operation and high resolution, and can be widely applied to seismic acceleration measurement of earthquake or structure.  相似文献   

基于纹理特征的围填海SAR图像分水岭分割方法          下载免费PDF全文

王衍  许小贝  洪海凌 《海洋学研究》2018,36(2):44-49

本文提出了一种基于纹理特征的围填海SAR图像分水岭分割方法,首先对机载MiniSAR图像进行灰度共生矩阵纹理滤波,获得纹理特征图像,再对纹理特征图像进行分水岭算法分割,将获得的形态学重建图像进行门限阈值分割,得到最后的二值化分割结果。该方法一方面通过调整灰度共生矩阵纹理滤波的窗口大小,抑制了斑点噪声的影响;另一方面,利用分水岭算法对边缘模糊杂乱图像的优势,提高了围填海信息提取的准确性。实验结果表明,本方法对高分辨率SAR图像围填海监测图像的分割效果良好。  相似文献   

设计反应谱标定方法的研究现状与讨论          下载免费PDF全文

蒋晓涵  薄景山    王竞  韩昕  郭晓云  赵培培  谭启迪 《世界地震工程》2018,34(4):038-48

设计反应谱及其标定方法的研究是工程抗震研究领域的基本问题之一。在现有研究成果的基础上，归纳和总结了设计反应谱及其标定方法的研究历史和现状；评述了研究进程中的若干节点问题；介绍了设计反应谱的标定原理和当前几种有代表性的设计反应谱的标定方法；分析了设计反应谱标定参数的影响因素。在此基础上，对设计反应谱及其标定方法研究中的强震资料积累问题、谱形状问题、标定参数的确定问题以及标定方法等问题进行了讨论并提出了改进和进一步研究的建议。  相似文献   

辽东半岛五龙金矿床航空电磁场特征及找矿意义     

石连成  骆燕  江民忠  王志宏  朱琳  陈伟  韩鹏辉  陈志鹏 《地质学报》2020,94(10):3106-3119

五龙金矿床位于五龙矿集区中部，是矿集区内规模大的石英脉型金矿。为查明矿集区深部构造及指导深部找矿预测，需结合深部地球物理资料综合分析研究。本文基于五龙矿集区航空探测任务，并结合其成矿地质特征，研究了五龙金矿在平面、剖面、空间等维度的航磁、航空TEM、航空大地电磁特征及其找矿意义。研究表明：平面上矿体位于鸡心沟断裂东侧负磁背景场中NE与近SN、NW向弱磁异常带交汇处，中等 强剩余磁异常带的转折端、梯度带，视电阻率低阻区及中低阻梯度带，深部存在团块状视磁化率高值区；剖面上矿体位于“左低右高，上高下低”的视电阻率梯度带上，呈中低阻、低阻特征及强磁场区至弱磁场区的视磁化率梯度带上，呈浅部“上高下低”、深部“下高上低”的中等 弱磁特征；空间上矿体位于鸡心沟断裂东侧的断裂构造低阻带与岩体高阻异常带的梯度带。五龙金矿地质地球物理找矿标志的建立和深部高视磁化率异常区的存在，表明矿区深部1000~2000m空间与五龙金矿体视电阻率、视磁化率特征相似的地段，仍具有较好找矿潜力。  相似文献   

基于一维综合孔径微波辐射计的海面温度反演研究   总被引：1，自引：0，他引：1  

艾未华  冯梦延  陈冠宇  陆文 《海洋学报(英文版)》2020,42(5):115-122

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.  相似文献   

Quantitative estimation of submarine groundwater discharge using airborne thermal infrared data acquired at two different tidal heights     

Ki‐mook Kang  Duk‐jin Kim  Yunjee Kim  Eunhee Lee  Bong‐Gwan Kim  Seung Hee Kim  Kyoochul Ha  Dong‐Chan Koh  Yang‐Ki Cho  Guebuem Kim 《水文研究》2019,33(7):1089-1100

Submarine groundwater discharge (SGD) plays an important role in coastal biogeochemical processes and hydrological cycles, particularly off volcanic islands in oligotrophic oceans. However, the spatial and temporal variations of SGD are still poorly understood owing to difficulty in taking rapid SGD measurements over a large scale. In this study, we used four airborne thermal infrared surveys (twice each during high and low tides) to quantify the spatiotemporal variations of SGD over the entire coast of Jeju Island, Korea. On the basis of an analytical model, we found a linear positive correlation between the thermal anomaly and squares of the groundwater discharge velocity and a negative exponential correlation between the anomaly and water depth (including tide height and bathymetry). We then derived a new equation for quantitatively estimating the SGD flow rates from thermal anomalies acquired at two different tide heights. The proposed method was validated with the measured SGD flow rates using a current meter at Gongcheonpo Beach. We believe that the method can be effectively applied for rapid estimation of SGD over coastal areas, where fresh groundwater discharge is significant, using airborne thermal infrared surveys.  相似文献   

Global Statistical Assessment and Cross-Calibration with Jason-2 for Reprocessed HY-2 A Altimeter Data     

Maofei Jiang  Ke Xu  Yalong Liu 《Marine Geodesy》2018,41(3):289-312

HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

基于深度残差网络的机载LiDAR点云分类     

赵传  郭海涛  卢俊  余东行  张保明 《测绘学报》2020,49(2):202-213

机载LiDAR点云的分类是利用其进行城市场景三维重建的关键步骤之一。为充分利用现有的图像领域性能较好的深度学习网络模型,提高点云分类精度,并降低训练时间和对训练样本数量的要求,本文提出一种基于深度残差网络的机载LiDAR点云分类方法。首先提取归一化高程、表面变化率、强度和归一化植被指数4种具有较高区分度的点云低层次特征;然后通过设置不同的邻域大小和视角,利用所提出的点云特征图生成策略,得到多尺度和多视角点云特征图;再将点云特征图输入到预训练的深度残差网络,提取多尺度和多视角深层次特征;最后构建并训练神经网络分类器,利用训练的模型对待分类点云进行预测,经后处理得到分类结果。利用ISPRS三维语义标记竞赛的公开标准数据集进行试验,结果表明,本文方法可有效区分建筑物、地面、车辆等8类地物,分类结果的总体精度为87.1%,可为城市场景三维重建提供可靠的信息。  相似文献