Effect of wave nonlinearity on fatigue damage and extreme responses of a semi-submersible floating wind turbine     

《Applied Ocean Research》2019

Floating wind turbine has been the highlight in offshore wind industry lately. There has been great effort on developing highly sophisticated numerical model to better understand its hydrodynamic behaviour. A engineering-practical method to study the nonlinear wave effects on floating wind turbine has been recently developed. Based on the method established, the focus of this paper is to quantify the wave nonlinearity effect due to nonlinear wave kinematics by comparing the structural responses of floating wind turbine when exposed to irregular linear Airy wave and fully nonlinear wave. Critical responses and fatigue damage are studied in operational conditions and short-term extreme values are predicted in extreme conditions respectively. In the operational condition, wind effects are dominating the mean value and standard deviation of most responses except floater heave motion. The fatigue damage at the tower base is dominated by wind effects. The fatigue damage for the mooring line is more influenced by wind effects for conditions with small wave and wave effects for conditions with large wave. The wave nonlinearity effect becomes significant for surge and mooring line tension for large waves while floater heave, pitch motion, tower base bending moment and pontoon axial force are less sensitive to the nonlinear wave effect. In the extreme condition, linear wave theory underestimates wave elevation, floater surge motion and mooring line tension compared with fully nonlinear wave theory while quite close results are predicted for other responses.  相似文献   

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation     

Raphael Di Carlo Silva dos Santos  João Carlos Ribeiro Cruz  Manuel de Jesus dos Santos Costa 《Geophysical Prospecting》2020,68(7):2046-2063

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.  相似文献   

Seismic reliability assessment and the nonergodicity in the modelling parameter uncertainties     

Fatemeh Jalayer  Hossein Ebrahimian 《地震工程与结构动力学》2020,49(5):434-457

Modelling uncertainty can significantly affect the structural seismic reliability assessment. However, the limit state excursion due to this type of uncertainty may not be described by a Poisson process as it lacks renewal properties with the occurrence of each earthquake event. Furthermore, considering uncertainties related to ground motion representation by employing recorded ground motions together with modelling uncertainties is not a trivial task. Robust fragility assessment, proposed previously by the authors, employs the structural response to recorded ground motion as data in order to update prescribed seismic fragility models. Robust fragility can be extremely efficient for considering also the structural modelling uncertainties by creating a dataset of one-to-one assignments of structural model realizations and as-recorded ground motions. This can reduce the computational effort by more than 1 order of magnitude. However, it should be kept in mind that the fragility concept itself is based on the underlying assumption of Poisson-type renewal. Using the concept of updated robust reliability, considering both the uncertainty in ground motion representation based on as-recorded ground motion and non ergodic modelling uncertainties, the error introduced through structural reliability assessment by using the robust fragility is quantified. It is shown through specific application to an existing RC frame that this error is quite small when the product of the time interval and the standard deviation of failure rate is small and is on the conservative side.  相似文献   

水岩作用下泥质板岩软化非线性机制研究     

黄智刚  左清军  吴立  陈福榜  胡圣松  朱盛 《岩土力学》2020,41(9):2931-2942

水岩作用下泥质板岩表现出明显的软化特征。通过单轴压缩试验分析了泥质板岩软化过程中单轴压缩强度、弹性模量和泊松比与吸水时间之间的关系；借助核磁共振试验研究了水岩作用下泥质板岩软化过程中孔隙的产生、扩展和贯通规律，分析了泥质板岩软化过程中孔隙度与吸水时间之间的关系；采用电镜扫描试验分析了水岩作用下泥质板岩软化过程中微观结构的演变规律，基于分形理论研究了不同浸泡时间下泥质板岩分形维数的变化规律；运用非线性动力学理论，选取微观结构孔隙形状分维值、孔隙度、单轴抗压强度、弹性模量作为描述泥质板岩与水溶液相互作用系统的变量，建立了水岩作用下泥质板岩的软化模型，结合试验数据验证了模型的适用性。结果表明：泥质板岩单轴抗压强度、弹性模量随吸水时间增大而减小，呈负线性相关，而泊松比与吸水时间之间的关系不明显；在浸泡初期，水岩作用强烈，泥质板岩内部微孔隙会发生扩展贯通进而形成更大尺寸的孔隙，孔隙度在浸泡初期增长较快；随着浸泡时间的延长，水岩作用减弱，孔隙度增长速率趋缓；随着吸水时间的推移，泥质板岩内部孔隙相互连通，进而形成复杂网状结构的大孔，泥质板岩分形维数呈对数增长，最终趋于稳定；采用非线性模型计算的结果与试验数据较接近，说明泥质板岩的软化过程具有明显的非线性动力学特征，利用非线性动力学模型可以较好地表征水岩作用下泥质板岩的软化规律。研究成果可为软岩?水相互作用理论研究提供参考。  相似文献   

基于纵横波保幅分离的粘弹介质弹性波正演模拟     

侯志强  尹文笋  李键  孙永壮  刘云 《中国海洋大学学报(自然科学版)》2020,(1):82-92

地下介质往往表现为粘弹特性,研究基于粘弹假设的数值模拟方法对于正确认识地震波的传播规律和提高地震勘探精度具有重要意义。波动方程正演过程中纵横波的保幅解耦是研究准确的粘弹介质中地震波传播机理的前提,基于散度和旋度算子的纵横波解耦方法会使波场的相位和振幅产生畸变,且解耦后的波场在极性反转位置上无法与分离前混合波场各分量对应。在散度和旋度算子上再做一次梯度和旋度运算的波场分离方法虽然能够克服上述缺陷,但存在保幅性差等问题。本文从粘弹介质中的一阶速度-应力方程出发,推导了矢量纵横波分离的波数域表达式,结合有限差分思路给出了其在空间域的求解方法。本文方法利用纵横波的传播速度对现有的矢量波场分离方法进行振幅校正,并将校正结果分别作为纵波与横波对时间的二阶偏导,实现了粘弹介质中的纵横波分离。模型试算结果表明,本文方法能够克服现有方法的缺陷,获得更具保幅性的波场分离结果。  相似文献   

德令哈13.7m望远镜多波束接收机的运行          下载免费PDF全文

李振强  张旭国  徐烨  左营喜  李积斌  孙继先  逯登荣  巨秉刚  张海龙  金风娟  罗春盛 《天文学报》2021,62(3):24

德令哈13.7 m望远镜是中国最重要的射电望远镜之一.望远镜自安装超导成像频谱仪以及采用飞行观测模式以来,运行近10 yr.在此期间,望远镜开展并完成大量的天文观测,累积了巨量的天文数据,取得了一系列重要的科研成果.介绍了超导成像频谱仪在天文观测中的运行状态,运行中疑难问题、故障现象及解决方案.详述了超导成像频谱仪各方面性能测试及多年来的性能分析,包含接收机噪声温度及望远镜系统噪声温度、镜像抑制比、接收机稳定性、波束性能等方面.列举了超导成像频谱仪更新发展方面的工作,包含本振功率自动化调整、边带分离型超导混频器预放大电路的更新、控制程序的优化等.总结经验和规律,承前启后,将过去的超导成像频谱仪的维护运行经验应用到之后新一代大规模接收机系统中.  相似文献   

基于参考台的盲源分离法在抑制地磁场近场噪音中的应用研究   总被引：2，自引：0，他引：2       下载免费PDF全文

周媛媛  常莹  陈浩  周勇  马永辉  谢成良  何展翔  服部克巳  韩鹏 《地球物理学报》2019,62(2):572-586

随着城市建设的不断发展,地磁场观测受到的人文干扰越来越严重.汽车、地铁、高铁等产生的近场噪音造成了地磁脉动等空间场源信号难以被精确观测,严重影响了地磁观测资料的实际使用价值.因此抑制这些近场噪音、提取空间场源信号具有科学意义和应用价值.本研究将远场参考法和盲源信号分离法相结合,提出了一种能有效分离空间场源信号和近场噪音的方法.首先,基于仿真分析,我们准确分离了不同特征的源信号,阐明了此方法的有效性.然后,我们将该方法应用于日本千叶地区受电车干扰较为严重的实际磁场观测数据,并选用数据质量较高的KAK国际基准台作为远场参考,实现了地磁脉动和电车干扰信号的分离,并在此基础上对观测台站的近场噪音进行了抑制.这些结果表明基于参考台的盲源信号分离法在抑制近场噪音、提取地磁场信号中是有效的,可能在电磁法勘探中具有潜在的应用价值.  相似文献   

A novel bidirectional pendulum tuned mass damper using variable homogeneous friction to achieve amplitude-independent control     

Emiliano Matta 《地震工程与结构动力学》2019,48(6):653-677

Passive tuned mass dampers (TMDs) are widely used in controlling structural vibrations. Although their principle is well established, the search for improved arrangements is still under way. This effort has recently produced an innovative paradigm of bidirectional pendulum TMD (BTMD) that, moving along a specially designed three-dimensional (3D) surface, can simultaneously control two in-plane orthogonal structural modes. In existing versions of BTMDs, energy dissipation is provided either by ordinary horizontal viscous dampers or by an original arrangement of vertical friction dampers. In this paper, a new paradigm is proposed, in which energy dissipation comes from the tangential friction arising along the pendulum surface out of an optimal spatially variable friction coefficient pattern. Within this paradigm, if the friction coefficient is taken proportional to the modulus of the pendulum surface gradient, the dissipation model results nonlinear homogeneous in the small-displacement domain, and the performance of the absorber, herein called the homogeneous tangential friction BTMD (HT-BTMD), results independent from the excitation level. The present work introduces this concept, derives the analytical model of the HT-BTMD, establishes a method for its optimal design, and numerically verifies its seismic effectiveness in comparison with viscously damped devices. The validity and feasibility of the concept are demonstrated through experimental tests on a small-scale lab prototype, which also show the efficacy of a stepwise approximation of the homogeneous friction pattern. The new device proves a competing alternative to existing BTMDs, and homogeneous tangential friction proves a promising new paradigm to provide pendular systems with amplitude-independent structural damping.  相似文献   

铁同位素分析测试技术研究进展   总被引：5，自引：3，他引：2  

秦燕  徐衍明  侯可军  李延河  陈蕾 《岩矿测试》2020,39(2):151-161

铁是地球上丰度最高的变价元素,在自然界大量分布于各类矿物、岩石、流体和生物体中,并广泛参与成岩作用、成矿作用、热液活动和生命活动过程。铁同位素组成对地球化学、天体化学和生物化学方面提供重要的信息,是同位素地球化学研究领域的热点。铁同位素的精确测量是开展相关研究的重要基础。本文评述了铁同位素测试技术的研究进展,主要包括:①溶液法测试铁同位素样品纯化过程中阴离子树脂的改进;②质谱分析从传统的热电离质谱法发展为多接收电感耦合等离子体质谱法;③激光微区原位测试技术的研发等。在此基础上,对测试过程中会导致产生铁同位素分馏的步骤和校正方法进行了总结,并对各种测试方法的优缺点进行了评述。本文认为:溶液法分析流程长且复杂,但分析精度高(0.03‰,2SD)、方法稳定;微区原位分析方法从纳秒激光剥蚀发展为飞秒激光剥蚀,脉冲持续时间更短、脉冲峰值强度更高(可达10~(12)W),聚焦强度超过10~(20)W/cm~2,使其具有分析速度快、空间分辨率高的优势。微区原位法可以从微观角度去讨论铁同位素变化的地球化学过程,但基体效应的存在限制了微区原位铁同位素的广泛应用。因此,缩短溶液法分析流程,开发系列基体匹配的标准样品,是铁同位素分析方法研发的方向。  相似文献   

基于投影变换的线阵旋转扫描相机标定方法     

苏琳  巫兆聪  闫钊  王鹏 《测绘通报》2019,(4):96-98,102

针对线阵旋转扫描相机标定数据难以获取及模型解算不稳定的问题，提出了一种基于投影变换的线阵旋转扫描相机标定方法。首先构建了一种新的线阵旋转扫描相机成像模型，该模型可以根据相机旋转平台参数、线阵旋转扫描相机成像平面与其切平面的位置关系将旋转扫描图像投影为框幅式图像；然后根据构建出的成像模型，采用直接线性变换法和非线性优化方法进行相机标定和参数优化。试验结果表明，此方法简单易行，具有较高的精度。  相似文献