基于车载激光点云的街景立面自动提取     

耿雨馨  钟若飞  彭宝江 《地球信息科学学报》2018,20(4):480-488

街道景观图是城市规划设计和城市管理的重要参考依据,车载点云数据能够提供沿街建筑的三维点信息,精度高,覆盖范围广泛,为街景立面整治提供了新的解决方案。为此,本文提出一种适用于车载点云的街景立面的自动提取方法,提取立面点云的具体步骤为：对原始数据去噪滤波;选取非地面点构建规则格网并二值化,依据语义特征筛选出建筑物点云;用POS数据拟合直线段帮助选取参考向量与参考平面;计算点云到参考面的距离,按距离分类点云数据,并对前述步骤中未分类点另行提取,合并面点集得到以沿街建筑物立面为主的街景立面点云。为了验证这一方法的可行性和有效性,采用点云数据进行实验,实验结果表明本方法在一定程度上提高了数据处理效率,能得到较理想的结果。  相似文献   

发展GNSS基础设施，满足新的科学需求——美国国家科学基金会（NSF）地球科学十年战略规划解读     

王坦  李瑜 《地震地磁观测与研究》2020,41(4):266-269

  相似文献   

川滇地块西部差异性旋转的构造意义:青藏高原东南缘白垩纪红层古地磁学新证据          下载免费PDF全文

王恒  杨振宇 《地球物理学报》2019,62(5):1789-1808

印度—欧亚板块碰撞以来青藏高原内部及其周缘地区经历了复杂的构造演化,复杂构造变形区的复合构造使得古地磁的数据解释究竟代表区域的构造旋转还是只能反映局部的构造变形一直是备受关注的问题.本文通过采集川滇地块西缘渔泡江断裂东侧三岔河地区白垩纪红层古地磁样品,揭示采样区差异性旋转并探讨川滇地块西部自中新世以来的构造演化规律.前人的地质调查表明川滇地块渔泡江断裂东侧上白垩统赵家店组地层发育倾伏褶皱.三岔河剖面以三岔河镇为界分为南北两段,三岔河南段剖面高温剩磁分量平均方向在倾斜校正后Ds=29.3°,Is=45.7°,ks=54.3,α95=6.6°,倾伏地层产状校正后Ds=30.6°,Is=46.6°,ks=69.3,α95=5.8°;而三岔河北侧剖面高温剩磁分量平均方向在倾斜校正后Ds=350.4°,Is=42.1°,ks=69.4,α95=9.2°,倾伏地层产状校正后Ds=347.4°,Is=41.9°,ks=96.6,α95=7.8°;两组高温剩磁分量均通过了褶皱检验,表明其获得于褶皱形成之前.相对于东亚稳定区80Ma古地磁极,三岔河南侧剖面发生了20.5°±4.8°的顺时针构造旋转量,与楚雄盆地核部之间不存在差异性旋转;但三岔河镇以北剖面却发生了22.7°±6.6°的逆时针旋转.综合分析川滇地块内部的古地磁数据表明自中新世以来川滇地块南部楚雄盆地经历了约20°的顺时针构造旋转,而三岔河镇北侧经历了约20°逆时针旋转.进一步分析表明三岔河北侧剖面相对于南侧剖面经历了约40°的逆时针旋转,可能由于研究区的滑脱构造导致岩石薄弱层拆离滑脱所引起.  相似文献   

An improved building detection approach using L-band POLSAR two-dimensional time-frequency decomposition over oriented built-up areas     

Lei Deng  Ying He  Zhi-hui Mao  Jie Yu 《地理信息系统科学与遥感》2019,56(1):1-21

The objective of this study is to efficiently extract detailed information about various man-made targets in oriented built-up areas using polarimetric synthetic aperture radar (POLSAR) images. This paper develops an improved approach for building detection by utilizing Two-Dimensional Time-Frequency (2-D TF) decomposition. This method performs outstandingly in distinguishing between man-made and natural targets based on the isotropic behaviors, frequency-sensitive responses, and scattering mechanisms of objects. The proposed method can preserve the spatial resolution and exploit the advantages of TF decomposition; specifically, the exact outlines of buildings can be effectively located, and more types of features (e.g., flat roofs, roads, and walls that are oblique to the radar illumination) can be distinguished from forests in complex built-up areas by 2-D TF decomposition. The coarser-resolution subaperture images that are produced in the azimuth direction, which correspond to different looking angles, are beneficial for detecting man-made structures with main scattering centers oriented at oblique angles with respect to the radar illumination. In the range direction, the obtained subaperture images, which correspond to various observation frequencies, can be helpful in distinguishing flat roofs and roads from forests. This method was successfully implemented to analyze both NASA/JPL L-band AIRSAR and L-band EMISAR data sets. The building detection results of the proposed method exhibit a significant improvement over those of other methods and reach an overall accuracy over 80%, with approximately 20% higher than the accuracies of K-means clustering and the entropy/alpha-Wishart classifier and approximately 10% higher than the accuracy of the support vector machine method. Moreover, building details can be precisely detected, obliquely oriented buildings can be identified, and the distinction between buildings and forests is significantly improved, as both visually and statistically indicated. This method is highly adaptable and has substantial application value.  相似文献   

面状实体增量融合过程中拓扑冲突检测及一致性维护方法研究          下载免费PDF全文

张旗升  王艳慧  刘轩朋 《武汉大学学报(信息科学版)》2019,44(3):467-474

针对目前面状实体增量融合过程中存在的拓扑冲突检测及一致性维护方法局限性强、通用性及效率较低、拓扑差异识别不准确等问题，提出了一种新的基于空间关系模型的拓扑一致性检测及维护方法。该方法在面状增量实体的基础上，设计了包括定性的面状实体拓扑关系类型、定量的位置特征及部分拓扑关系的集成空间关系表达模型，以最新版本数据库中面状增量实体的拓扑关系为冲突检测标准，设计并实现了顾及几何一致性的面状实体拓扑冲突自动检测和一致性维护算法。实验结果表明，该算法精度可达到90%左右，可很好地完成增量融合过程中的冲突检测及拓扑一致性维护工作，针对性强，适用性高。  相似文献   

Assessing the performance of a large-scale irrigation system by estimations of actual evapotranspiration obtained by Landsat satellite images resampled with cubic convolution     

《International Journal of Applied Earth Observation and Geoinformation》2019

Remote sensing techniques allow monitoring the Earth surface and acquiring worthwhile information that can be used efficiently in agro-hydrological systems. Satellite images associated to computational models represent reliable resources to estimate actual evapotranspiration fluxes, ET_a, based on surface energy balance. The knowledge of ET_a and its spatial distribution is crucial for a broad range of applications at different scales, from fields to large irrigation districts. In single plots and/or in irrigation districts, linking water volumes delivered to the plots with the estimations of remote sensed ET_a can have a great potential to develop new cost-effective indicators of irrigation performance, as well as to increase water use efficiency. With the aim to assess the irrigation system performance and the opportunities to save irrigation water resources at the “SAT Llano Verde” district in Albacete, Castilla-La Mancha (Spain), the Surface Energy Balance Algorithm for Land (SEBAL) was applied on cloud-free Landsat 5 Thematic Mapper (TM) images, processed by cubic convolution resampling method, for three irrigation seasons (May to September 2006, 2007 and 2008). The model allowed quantifying instantaneous, daily, monthly and seasonal ET_a over the irrigation district. The comparison between monthly irrigation volumes distributed by each hydrant and the corresponding spatially averaged ET_a, obtained by assuming an overall efficiency of irrigation network equal to 85%, allowed the assessment of the irrigation system performance for the area served by each hydrant, as well as for the whole irrigation district. It was observed that in all the investigated years, irrigation volumes applied monthly by farmers resulted generally higher than the corresponding evapotranspiration fluxes retrieved by SEBAL, with the exception of May, in which abundant rainfall occurred. When considering the entire irrigation seasons, it was demonstrated that a considerable amount of water could have been saved in the district, respectively equal to 26.2, 28.0 and 16.4% of the total water consumption evaluated in the three years.  相似文献   

Discussion of “Performance of a transparent flexible shear beam container for geotechnical centrifuge modelling of dynamic problems by Ghayoomi,Dashti and McCartney”     

《Soil Dynamics and Earthquake Engineering》2014

  相似文献   

近20年来长江经济带生态环境变化          下载免费PDF全文

周权平  张澎彬  薛腾飞  姜月华  郭琳  杨冉冉 《中国地质》2021,48(4):1127-1141

长江经济带发展战略实施以来,长江上、中、下游地区经济快速发展,与此同时,生态系统不可避免受到扰动,长江经济带生态环境状况面临压力,亟需开展长江经济带生态环境质量评价。本文选取2001年和2020年MODIS和Landsat遥感影像计算湿度、绿度、干度、热度4个评价指标,通过主成分分析方法计算遥感生态指数RSEI,对长江经济带11省(市)生态环境现状及变化进行定量分析评价。结果表明长江经济带整体生态环境等级为较优,2001—2020年保持总体向好态势。空间分布上,生态环境优等区域主要分布于武夷山、罗霄山、雪峰山、武陵山、巫山、大巴山、大别山、西双版纳等山地丘陵一带,生态环境较差及差等区域主要分布于大中小城镇等人类聚集地、川西横断山区。时空变化上,生态环境等级下降区域主要集中在长三角太湖周边、江汉平原、洞庭湖周边、安徽西北部、湖南南部及四川盆地等人类聚集地周边,生态环境等级上升区域主要集中在四川盆地大部、重庆山区及三峡库区、贵州大部、云南东南部、安徽中部及北部、江苏北部等地区。  相似文献   

利用地面LiDAR精细化测量活断层微地貌形态——以毛垭坝断裂禾尼处断层崖为例   总被引：1，自引：1，他引：0  

张迪  李家存  吴中海  刘绍堂  卢燕 《地质力学学报》2021,27(1):63-72

受地壳内部持续运动和沉积、风化等自然动力及人类生产与生活活动影响,活断层微地貌形态往往比较复杂,传统测量方法较难快速、高效地获取大范围内精细化的活断层微地貌形态,激光雷达扫描技术的出现和发展为活断层微地貌的精细化与定量化研究提供了新的技术手段。以川西理塘毛垭坝盆地北缘的正断层崖为研究对象,利用地面LiDAR获取活断层微地貌高精度点云后,经过点云配准、滤波、重采样和三角构网处理后,建立了0.05 m分辨率的数字高程模型和真彩色三维模型,在此基础上分析了断层崖地貌特征,并获取了正断层错动两期最新地貌面的精确垂直位错量。研究结果表明,地面LiDAR技术是精细测量活断层微地貌形态和量化相关地貌特征参数的有效手段,提高了活断层微地貌形态测量的精度和认识水平。  相似文献   

Progress and prospect of research on forest landscape model     

DAI Erfu  WU Zhuo  WANG Xiaofan  FU Hua  XI Weimin  PAN Tao 《地理学报》2015,25(1):113-128

The Forest Landscape Model (FLM) is an efficiency tool of quantified expression of forest ecosystem''s structure and function. This paper, on the basis of identifying FLM, according to the stage of development, summarizes the development characteristics of the model, which includes the theoretical foundation of mathematical model, FLM of stand-scale, primary development of spatial landscape model, rapid development of ecosystem process model as the priority, and developing period of structure and process driven by multi-factor. According to the characteristics of different FLMs, this paper classifies the existing FLM in terms of mechanism, property and application, and elaborates the identifications, advantages and disadvantages of different types of models. It summarizes and evaluates the main application fields of existing models from two aspects which are the changes of spatial pattern and ecological process. Eventually, this paper presents FLM''s challenges and directions of development in the future, including: (1) more prominent service on the practical strategy of forest management''s objectives; (2) construction of multi-modules and multi-plugin to satisfy landscape research demand in various conditions; (3) adoption of high resolution''s spatial-temporal data; (4) structural construction of multi-version module; (5) improving the spatial suitability of model application.  相似文献