煤层陷落柱多波地震数值模拟与成像研究     

朱广辉  韩建光  谷丙洛 《地质论评》2020,66(3):720-726

陷落柱是煤田勘探开发中常见的地质灾害体,陷落柱的精确探测一直是煤田安全生产研究的重点,单纯依靠常规纵波地震勘探技术难以满足现阶段煤田精细勘探的需求。多波地震勘探技术能够获得纵波和转换波地震资料,提供更丰富的波场信息,且转换波对于埋深较浅的小幅度构造有更高的分辨率,充分利用多分量地震资料可以有效的提高地震勘探的精度。本文将多波地震技术应用到煤层陷落柱研究中,利用数值方法对煤层陷落柱进行多波地震勘探模拟研究,采用弹性波有限差分方法对构建的陷落柱模型进行多分量正演模拟,然后分别对波场分离后的PP波和PS波地震数据进行叠前深度偏移成像测试。通过对两个小尺寸陷落柱模型进行多波地震数值试算表明,多波地震勘探技术是一种有效的煤层陷落柱探测方法,充分利用多波地震资料有利于查明煤层陷落柱构造,对陷落柱取得更好的勘探效果。  相似文献   

Model for multiblock columns subjected to base excitation     

Tamás Ther  László P. Kollár 《地震工程与结构动力学》2018,47(2):418-437

A new model is presented for multiblock columns subjected to earthquakes, which contains an impact and an opening model. Both in the impact and in the opening model, all the possible opening configurations are investigated because it was found that in many practical cases, unexpected patterns may occur. The model is purely mechanical: assuming rigid blocks and classical (inelastic) impact. The effect of energy dissipation during impact was investigated. Using our model in accordance with the literature, it was found that monolithic blocks are more vulnerable to overturning than multiblock systems.  相似文献   

CIC-200型离子色谱仪常见故障解析     

常姣  杨静  李颖  李晓锐  姚林鹏 《地震地磁观测与研究》2018,39(4):164-168

结合夏县中心地震台CIC-200型离子色谱仪实际观测，从仪器输液系统、分离系统、基线、管路等方面详细阐述色谱仪常见故障，逐一分析原因，并给出相应故障排除方法，为同类仪器维护提供参考，并为获得准确观测数据，延长仪器使用寿命，提出日常维护方法及建议。  相似文献   

东南印度洋中脊澳大利亚-南极洲不整合带地区岩浆供应与构造作用沿洋脊的变化     

刘守金  林间  周志远  张帆 《海洋学报(英文版)》2020,39(1):118-129

We analyzed seafloor morphology and geophysical anomalies of the Southeast Indian Ridge(SEIR) to reveal the remarkable changes in magma supply along this intermediate fast-spreading ridge. We found systematic differences of the Australian-Antarctic Discordance(AAD) from adjacent ridge segments with the residual mantle Bouguer gravity anomaly(RMBA) being more positive, seafloor being deeper, morphology being more chaotic, M factors being smaller at the AAD. These systematic anomalies, as well as the observed Na_(8.0) being greater and Fe_(8.0) being smaller at AAD, suggest relatively starved magma supply and relatively thin crust within the AAD.Comparing to the adjacent ridges segments, the calculated average map-view M factors are relatively small for the AAD, where several Oceanic Core Complexes(OCCs) develop. Close to 30 OCCs were found to be distributed asymmetrically along the SEIR with 60% of OCCs at the northern flank. The OCCs are concentrated mainly in Segments B3 and B4 within the AAD at ～124°–126°E, as well as at the eastern end of Zone C at ～115°E. The relatively small map-view M factors within the AAD indicate stronger tectonism than the adjacent SEIR segments.The interaction between the westward migrating Pacific mantle and the relatively cold mantle beneath the AAD may have caused a reduction in magma supply, leading to the development of abundant OCCs.  相似文献   

2013—2019年度海洋科学技术奖计量统计及其科研合作网络分析          下载免费PDF全文

赵晓龙  李保石  王泉斌 《海洋开发与管理》2020,37(11):19-27

文章基于2013—2019年度海洋科学技术奖，运用计量统计、社会网络分析等研究方法，探究海洋科学技术奖获奖成果计量特征、学科分布、获奖机构及其科研合作关系等，直观揭示海洋科学技术奖所构成的科研合作范式、科研合作网络结构等，以期为海洋科研管理、科技创新和学科建设等提供科学参考。研究表明：整体上，海洋科学技术奖获奖成果呈逐年递增趋势，一等奖与二等奖的获奖等级比值呈下降趋势；学科划分上，获奖成果主要隶属于“海洋科学”学科，又以海洋生物学、海洋装备与设备、海洋化学和物理海洋学为主体；获奖机构方面，海洋科学技术奖已奖励包括中国海洋大学和中国科学院海洋研究所等涉海类高校和科研院所在内的各类海洋科技创新主体285家，分布在山东、浙江、广东、上海、北京、江苏等19个省（市、自治区）；科研合作方面，海洋科学技术奖获奖核心机构所构建的科研合作关系紧密，以自然资源部第二海洋研究所的中心度最高，中国海洋大学的中间中心度最高，其控制该科研合作网络中其他机构之间沟通交流的力度最大。  相似文献   

Modeling RC column flexural failure modes under intensive seismic loading     

Ilias Gkimousis  Vlasis Koumousis 《地震工程与结构动力学》2018,47(9):1942-1962

The aim of this work is to model beam‐column behavior in a computationally effective manner, revealing reliably the overall response of reinforced concrete members subjected to intensive seismic loading. In this respect, plasticity and damage are considered in the predominant longitudinal direction, allowing for fiber finite element modeling, while in addition the effect of inelastic buckling of longitudinal rebars, which becomes essential at later stages of intensive cyclic loading, is incorporated. Α smooth plasticity‐damage model is developed for concrete, accounting for unilateral compressive and tensile behavior, nonlinear unloading and crack closure phenomena. This is used to address concrete core crushing and spalling, which triggers the inelastic buckling of longitudinal rebars. For this reason, a uniaxial local stress‐strain constitutive relation for steel rebars is developed, which is based on a combined nonlinear kinematic and isotropic hardening law. The proposed constitutive model is validated on the basis of existing experimental data and the formulation of the buckling model for a single rebar is developed. The cross section of rebar is discretized into fibers, each one following the derived stress‐strain uniaxial law. The buckling curve is determined analytically, while equilibrium is imposed at the deformed configuration. The proposed models for concrete and rebars are embedded into a properly adjusted fiber beam‐column element of reinforced concrete members and the proposed formulation is verified with existing experimental data under intensive cyclic loading.  相似文献   

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections     

Ching-Yi Tsai  Keh-Chyuan Tsai  Chao-Hsien Li  Chung-Che Wu  Ker-Chun Lin  Sheng-Jhih Jhuang 《地震工程与结构动力学》2020,49(13):1344-1362

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.  相似文献   

CFD modelling of a small–scale fixed multi–chamber OWC device     

《Applied Ocean Research》2019

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.  相似文献   

柱色谱分离-分子筛络合洗脱过程中正构烷烃单体碳同位素分馏研究     

董浩伟  赵佳玉  曾凡刚  谢曼曼  尚文郁  王淑贤  孙青 《岩矿测试》2021,(3):349-357

应用气相色谱-气体同位素质谱(GC-C-IRMS)分析正构烷烃单体碳同位素之前,需要对饱和烃样品中正构烷烃和异构烷烃进行预分离、富集,在预分离和富集过程中正构烷烃单体碳同位素是否发生分馏是高精度分析正构烷烃单体碳同位素比值(δ~(13)C)的关键。本文以正构烷烃混合溶液为对象,利用柱色谱、5■分子筛络合、环己烷-正戊烷混合溶剂两次洗脱,GC-C-IRMS分析正构烷烃单体碳同位素,研究前处理过程中正构烷烃单体碳同位素是否发生分馏。结果表明:使用柱色谱分离前后,多数正构烷烃单体碳同位素比值相差-0.2‰～0.2‰;当5■分子筛不完全络合时,未络合的正构烷烃单体碳同位素比值偏重约0.7‰,可能发生了微弱的碳同位素分馏,但并未影响洗脱后的正构烷烃单体碳同位素比值;使用环己烷-正戊烷混合溶剂洗脱前后,碳同位素比值相差-0.2‰～0.5‰,以同样方式洗脱第二次,获得的正构烷烃单体碳同位素比值与模拟样品相差-0.3‰～0.2‰。分析不同回收率(20%)正构烷烃的单体碳同位素比值,处理前后的差值基本在0.3‰以内,可见当正构烷烃回收率低至20%左右时,其单体碳同位素仍未发生明显分馏。柱色谱分离-5■分子筛络合-混合溶剂洗脱方法适用于回收率大于20%的正构烷烃单体碳同位素分析。  相似文献   

长江中下游六省大气甲烷柱浓度时空分布   总被引：2，自引：0，他引：2  

冯敏玉  张根  夏玲君  熊劦  李柏贞  孔萍  占明锦  张玉霞 《地球化学》2021,50(1):121-132

甲烷(CH4)是造成气候变暖的主要温室气体之一。为了了解长江中下游水稻种植区CH4浓度的分布情况,本次研究基于温室气体观测卫星(greenhouse gases observing satellite,GOSAT)和大气红外探测仪(atmospheric infrared sounder,AIRS)卫星反演的数据产品,对我国长江中下游六省大气CH4柱浓度的时空分布特征进行了研究。研究结果表明,由GOSAT反演的长江中下游六省大气CH4浓度呈逐年增长趋势,其年均浓度由2011年的1817×10^?9增长至2018年的1875×10^?9,高于东三省、华北平原和全国平均水平。区域平均年增长量为8.2×10^?9 a^?1。各省年际增长幅度略有差异,纬度偏低的江西、湖南和浙江三省大气CH4浓度高且增长量偏大,纬度偏高的湖北、安徽和江苏三省大气CH4浓度略低且增长量偏小。长江中下游六省大气CH4呈现较强的季节变化特征,湖北、湖南、江西和浙江峰值出现在9月,安徽、江苏峰值出现在8月。垂直方向上长江中下游六省CH4浓度随气压降低,浓度逐渐减小,呈现出明显的季节变化特征,近地面层GOSAT反演的最高值出现在夏季,最低值出现在春季;高层最高值出现在秋季,最低值出现在春季。AIRS反演的大气CH4浓度空间分布上北高南低,与GOSAT反演结果不一致,可能由于AIRS主要反映了对流层中层大气状况而GOSAT更多的反映了近地面层大气CH4的变化。其垂直方向上呈现高度越高,浓度越低,不同高度上秋季浓度均最高。  相似文献