地中海直布罗陀海峡附近内孤立波的地球物理特征          下载免费PDF全文

孙绍箐  张锟  宋海斌 《地球物理学报》2019,62(7):2622-2632

本文主要利用地震海洋学方法研究地中海直布罗陀海峡附近内孤立波的结构特征，此处内孤立波为第一模态下沉型，为中幅度和大幅度内孤立波，垂向振幅最大可达74.5 m，振幅随深度增加呈增大趋势，传播速度随振幅增大而增大，可以确定"真"最大振幅位置位于密跃层附近.由于类多普勒效应和孤立波与测量船之间存在夹角的原因，从地震剖面上得到的为视半高宽参数，需要进行校正后才能得到比较真实的半高宽参数，校正后半高宽最高可达到1721.8 m，但是校正后的半高宽与理论结果有些差距，这可能与内孤立波的发育稳定程度有关.随着内孤立波包不断向东运动，整体波宽变大，垂向速度变小.本文将地震海洋学方法拓展应用于地中海区域内孤立波分析，进一步证明了利用地震海洋学方法研究海水运动的可行性.  相似文献   

Seismic amplitude inversion for the transversely isotropic media with vertical axis of symmetry     

Feng Zhang  Tuo Zhang  Xiang-Yang Li 《Geophysical Prospecting》2019,67(9):2368-2385

Transverse isotropy with a vertical axis of symmetry is a common form of anisotropy in sedimentary basins, and it has a significant influence on the seismic amplitude variation with offset. Although exact solutions and approximations of the PP-wave reflection coefficient for the transversely isotropic media with vertical axis of symmetry have been explicitly studied, it is difficult to apply these equations to amplitude inversion, because more than three parameters need to be estimated, and such an inverse problem is highly ill-posed. In this paper, we propose a seismic amplitude inversion method for the transversely isotropic media with a vertical axis of symmetry based on a modified approximation of the reflection coefficient. This new approximation consists of only three model parameters: attribute A, the impedance (vertical phase velocity multiplied by bulk density); attribute B, shear modulus proportional to an anellipticity parameter (Thomsen's parameter ε−δ); and attribute C, the approximate horizontal P-wave phase velocity, which can be well estimated by using a Bayesian-framework-based inversion method. Using numerical tests we show that the derived approximation has similar accuracy to the existing linear approximation and much higher accuracy than isotropic approximations, especially at large angles of incidence and for strong anisotropy. The new inversion method is validated by using both synthetic data and field seismic data. We show that the inverted attributes are robust for shale-gas reservoir characterization: the shale formation can be discriminated from surrounding formations by using the crossplot of the attributes A and C, and then the gas-bearing shale can be identified through the combination of the attributes A and B. We then propose a rock-physics-based method and a stepwise-inversion-based method to estimate the P-wave anisotropy parameter (Thomsen's parameter ε). The latter is more suitable when subsurface media are strongly heterogeneous. The stepwise inversion produces a stable and accurate Thomsen's parameter ε, which is proved by using both synthetic and field data.  相似文献   

考虑填充墙影响的钢筋混凝土厂房结构地震易损性分析     

梁志强  徐超  温增平 《震灾防御技术》2019,14(4):707-718

采用对角斜撑模拟纵向填充墙的作用，建立考虑填充墙和不考虑填充墙厂房结构模型，采用拉丁超立方抽样技术建立考虑材料不确定性的结构分析样本，基于随机Pushover分析确定结构不同破坏状态下的统计参数。综合考虑结构材料强度及输入地震动不确定性的影响，通过非线性时程分析开展单层钢筋混凝土厂房结构易损性研究，在此基础上比较结构横、纵向易损性的差异，研究填充墙对结构易损性的影响。研究结果表明:钢筋混凝土厂房结构体系横向地震易损性显著大于纵向地震易损性；对纵向结构体系而言，加入填充墙会明显降低结构易损性，但在相同强度的地震动作用下，填充墙破坏程度比主体结构严重，这与厂房结构的实际震害特征相符。  相似文献   

桥梁沉井基础抗震性能研究现状及展望          下载免费PDF全文

王义  陈兴冲  张熙胤  张永亮  刘正楠 《世界地震工程》2020,(1):044-55

随着国内外大跨桥梁特别是跨海桥梁建设的迅速发展，沉井基础在桥梁基础中所占的比例越来越大。虽然沉井基础作为1种刚性基础具有良好的力学性能，然而震害实践表明沉井基础在地震作用下也并非万无一失。通过分析国内外典型桥梁沉井基础的震害特征发现，沉井基础的地震破坏与桩基础有显著差异，且与埋置深度有直接关系；研究表明:地震作用下沉井基础的破坏机理及地基承载力与静力作用下明显不同，但目前在该方面的研究还较为欠缺；总结和对比了现有几种沉井基础-土相互作用研究方法，并分析了几种研究方法的优缺点和适用场合；同时也归纳和对比了各国抗震规范对桥梁沉井基础的基本规定、适用范围、计算方法和构造规定等方面的内容。最后结合现有的研究现状对沉井基础抗震性能研究的发展方向进行了展望，此外，随着我国跨海、跨江及跨库区大跨桥梁建设的发展，地震力和波浪力等多灾害因素共同作用下深水沉井基础桥梁破坏机理及设计方法的研究势在必行。  相似文献   

Crack nucleation in saturated porous media     

Luc Dormieux  Eric Lemarchand  Thomas Carlioz  Laurent Jeannin 《国际地质力学数值与分析法杂志》2020,44(5):553-574

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

基于MINA框架的应急救助与地震灾情管理平台设计与实现     

肖本夫  申源  陈维锋  毛利  格桑扎西  梁厚朗 《震灾防御技术》2020,15(4):836-845

针对不同用户群体应急救助和地震灾情需求，基于MINA框架，运用阿里云基础架构、微信组件和应用程序接口等技术方法，设计并构建集灾情信息收集与报送、应急救助服务、科普宣教等功能于一体的管理平台。该平台的设计与实现不仅有利于震后现场应急队员收集并准确报送实时灾情信息，还可为被救助人员提供防震减灾知识和地震应急避难场所空间分布等应急救助信息，实现了应急救助与地震灾情的综合管理，提升了震后应急救助、应急指挥和辅助决策等方面的服务能力。  相似文献   

张家口蔚县农村房屋抗震性能调查及统计分析     

马旭东  牛露  刘晓丹  刘龙  茅远哲  关恒瑜  刘贾贾  刘志辉 《震灾防御技术》2019,14(4):829-837

为进一步了解蔚县地区农村房屋的抗震性能，在该地区选取43个村庄、7732栋房屋进行实地调查和统计分析。主要调查房屋结构、建筑材料、房屋抗震构造措施等内容，分析各结构类型房屋抗震薄弱环节及房屋抗震性能，并统计分析经济、交通、地形等因素与房屋结构类型及抗震性能的关系，提出提高该地区农村房屋抗震性能的建议。  相似文献   

建筑结构地震易损性分析研究综述   总被引：4，自引：4，他引：0  

贾晗曦  林均岐  刘金龙 《震灾防御技术》2019,14(1):42-51

地震易损性是指在不同强度水平的地震作用下建筑结构发生各种破坏的条件概率。本文对地震易损性分析的发展历程进行回顾和总结，介绍了地震易损性的相关概念、研究目的和意义以及5个表达工具。随后，针对国内外学者对建筑结构的易损性分析方法开展了系统的梳理和分析，特别是从基于震害调查的经验分析法和基于数值模拟的理论计算法方面展开了重点综述，并简单介绍了一些不常用的方法。最后指出了国内外对建筑结构易损性分析研究的不足和未来的研究方向。  相似文献   

Main active faults and seismic activity along the Yangtze River Economic Belt: Based on remote sensing geological survey     

《China Geology》2020,3(2):314-338

The Yangtze River Economic Belt (YREB) spans three terrain steps in China and features diverse topography that is characterized by significant differences in geological structure and present-day crustal deformation. Active faults and seismic activity are important geological factors for the planning and development of the YREB. In this paper, the spatial distribution and activity of 165 active faults that exist along the YREB have been compiled from previous findings, using both remote-sensing data and geological survey results. The crustal stability of seven particularly noteworthy typical active fault zones and their potential effects on the crustal stability of the urban agglomerations are analyzed. The main active fault zones in the western YREB, together with the neighboring regional active faults, make up an arc fault block region comprising primarily of Sichuan-Yunnan and a “Sichuan-Yunnan arc rotational-shear active tectonic system” strong deformation region that features rotation, shear and extensional deformation. The active faults in the central-eastern YREB, with seven NE-NNE and seven NW-NWW active faults (the “7-longitudinal, 7-horizontal” pattern), macroscopically make up a “chessboard tectonic system” medium-weak deformation region in the geomechanical tectonic system. They are also the main geological constraints for the crustal stability of the YREB.  相似文献