规则池塘群的复杂直线模式识别     

刘呈熠  武芳  巩现勇  行瑞星  罗登瀚 《测绘学报》2020,49(2):256-266

针对现有面要素直线模式识别方法难以解决规则池塘中破碎区域的问题,提出了一种规则池塘群的复杂直线模式识别方法。首先,分析了规则池塘群的空间特征和认知特点,提出了“主次关系→并列关系→直线模式→复杂直线模式”的多层次认知顺序;其次,设计了主次关系池塘组、并列关系池塘组、直线模式池塘群的识别方法;最后,构建了复杂直线模式池塘群的识别模型。试验表明:本文方法能够消除破碎区域对规则池塘群直线模式提取的不利影响,有效提升复杂直线模式识别的质量。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

鄂尔多斯地块周缘垂直形变场负位错反演与应变积累研究     

张希  刘立炜  郝明  白卓立 《大地测量与地球动力学》2019,39(6):551-556

利用鄂尔多斯地块及其周缘1970～2014年的垂直形变速率场资料，借助负位错反演研究该区域长期应变积累。结果表明，地块东北缘山西断陷带中北段年均能量积累增量、剪应力强度都较高，西南缘六盘山断裂与渭河断裂西段次之；山西断陷带中南段至晋陕交界处年均剪应力强度较高且显示一定程度的能量积累；西秦岭构造区尤其西秦岭北缘断裂西段、晋冀蒙交界区也反映一定程度的能量积累特性。  相似文献   

岛屿海岸线自动化提取及其时空变迁研究——以大连市獐子岛为例   总被引：1，自引：1，他引：0  

丁小松  单秀娟  陈云龙  金显仕  杨涛 《海洋科学》2018,42(2):46-55

海岸带是受人类活动和全球海平面上升影响的敏感地带,海岸线的提取和监测是海岸带生态系统研究和社会管理的重要内容。本文在遥感和地理信息系统的支持下,以修正的归一化水体指数(Modified Normalized Difference Water Index,MNDWI)为基础,结合遥感影像处理和直方图均衡化等技术,实现了大连市獐子岛1985—2016年海岸线的自动化提取。结果表明:(1)通过与三位专家目视解译的成果比对,本文提取海岸线的精度能满足后续研究的要求(相对误差分别为0.045%,0.032%和0.023%);(2)近30年来,獐子岛海岸线总体呈现蚀退趋势,岸线长度与岛屿面积分别呈现变短和变小的趋势,獐子岛(主岛)和大耗岛的岸线蚀退速率最大,褡裢岛次之,小耗岛最小;在人类活动较为密集的区域,海岸线呈现出较为强烈的增长趋势,海水养殖和圈海建坝是岸线增长的主要驱动力;(3)獐子岛海岸线具有显著的分形性质,分形维数随时间呈现增大的趋势,獐子岛(主岛)的分形维数最大,褡裢岛的分形维数最小。  相似文献   

大别山及其周边现今垂直形变研究     

宋尚武  王庆良  郝明  周琳  刘立炜  胡亚轩 《大地测量与地球动力学》2018,38(1):32-35

基于1980年、2005年和2015年3期区域精密水准网观测资料，利用线性动态平差模型计算获取大别山地区水准网长期垂直运动速度场图像。研究发现，淮河平原地表下沉较为严重，大别山呈现弱隆升趋势运动，长江谷地边缘地区较大别山区呈现明显的隆升运动。跨郯庐断裂带水准剖面结果显示，垂直运动与地形呈负相关和弱相关。  相似文献   

利用短期静态PPP结果反演海潮负荷位移     

魏国光  王琪洁  彭葳  郭良琦 《大地测量与地球动力学》2019,39(6):607-612

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。  相似文献   

Damage assessment for submarine photoelectric composite cable under anchor impact     

《Applied Ocean Research》2018

The impact of dropped anchor on submarine photoelectric composite cables may possibly cause electrical faults, i.e. electricity and optical signal transmission failure. In order to study the impact capacity and structural impact failure mechanism, a test setup is designed originally to examine the structural and functional integrity. A detailed finite element model (FEM) is created, considering material nonlinearity and component interaction. A parametric analysis has been performed to predict the deformation of components and impact forces, under different impact velocities and collision directions. Relationships between the armor layer indentation rate and that of internal power and optical units are achieved. The impact deformation of internal entities can be evaluated intuitively by armor layer indentation. The proposed experimental and numerical methods are well correlated, suitable to assess the impact capacity of subsea power cables and assist the protection design of subsea power cables in engineering.  相似文献   

Muon density measurements with the KASCADE central detector     

《Astroparticle Physics》2002,16(4):183-386

Frequency distributions of local muon densities in high-energy extensive air showers (EAS) are presented as signature of the primary cosmic ray energy spectrum in the knee region. Together with the gross shower variables like shower core position, angle of incidence, and the shower sizes, the KASCADE experiment is able to measure local muon densities for two different muon energy thresholds. The spectra have been reconstructed for various core distances, as well as for particular subsamples, classified on the basis of the shower size ratio N_μ/N_e. The measured density spectra of the total sample exhibit clear kinks reflecting the knee of the primary energy spectrum. While relatively sharp changes of the slopes are observed in the spectrum of EAS with small values of the shower size ratio, no such feature is detected at EAS of large N_μ/N_e ratio in the energy range of 1–10 PeV. Comparing the spectra for various thresholds and core distances with detailed Monte Carlo simulations the validity of EAS simulations is discussed.  相似文献   

On the accretion geometry of Cyg X-1 in the low/hard state     

F. Eugenio Barrio  Chris Done  Sergei Nayakshin 《Monthly notices of the Royal Astronomical Society》2003,342(2):557-563

  相似文献   

Warm gas kinematics in shell galaxies     

R. Rampazzo  H. Plana  M. Longhetti  P. Amram  J. Boulesteix  J.-L. Gach  O. Hernandez 《Monthly notices of the Royal Astronomical Society》2003,343(3):819-830

  相似文献