水产饲料膨化机设计刍论     

徐钟良  陈启发 《台湾海峡》2001,20(Z1):207-211

据开发应用水产饲料膨化机实践，初步论述了膨化机生产能力与动力匹配，螺杆设计参数长径比，物料在腔内滞留时间，膨化腔设计及其温度调控，并提出改进设计的见解.  相似文献   

西藏冈底斯带侏罗纪岩浆作用的时空分布 及构造环境   总被引：40，自引：6，他引：34  

朱弟成  潘桂棠  王立全  莫宣学  赵志丹  周长勇  廖忠礼  董国臣  袁四化 《地质通报》2008,27(4):458-468

在新近完成的1：25万区域地质调查资料和相关研究成果的基础上,初步研究了西藏冈底斯带侏罗纪岩浆作用的分布特点及其年代学,并利用已有的地球化学数据重点分析了早期关注程度较低的侏罗纪花岗岩类岩浆作用的性质。目前在冈底斯弧背断隆带未发现侏罗纪火山岩;在冈底斯东部地区,早侏罗世岩浆活动几乎同时发生于南冈底斯（叶巴组火山岩和鸟郁、尼木花岗岩类）、冈底斯弧背断隆带（宁中、金达、布久花岗岩类）和北冈底斯（聂荣花岗岩类）,中晚侏罗世接奴群和拉贡塘组火山岩断续分布于北冈底斯,晚侏罗世岩浆活动零星分布于沙莫勒一麦拉一洛巴堆～米拉山断裂以北。将冈底斯侏罗纪岩浆活动置于时空框架内分析发现,南冈底斯和北冈底斯在侏罗纪时主要受俯冲作用的影响．而冈底斯弧背断隆带和中冈底斯自早侏罗世以来除了受到俯冲作用的影响外,还受到自东向西逐步扩展的碰撞作用的影响。结合古地磁重建资料和其他新发现．认为冈底斯带侏罗纪这种岩浆活动的特点可用班公湖一怒江洋壳向南、新特提斯洋壳向北的双向剪刀式（剪刀口向西张开）俯冲模式来解释。  相似文献   

旋挖钻进中硬岩及卵砾层钻头结构及施工工艺研究          下载免费PDF全文

张公正 《探矿工程》2005,32(2):40-42

旋挖钻进技术作为一种高效优质的钻进方法近年来广泛地被用于公路、铁路及大型水电站基础工程施工建设中，取得了良好的社会效益和经济效益。探讨了在卵砾石、漂石等复杂地层以及坚硬基岩中进行旋挖钻进所用钻头的结构及其施工工艺。  相似文献   

小动力旋挖钻机用嵌岩短螺旋钻头结构形式的改进          下载免费PDF全文

刘南昌  胡继良  黄玉文  翁炜  张宏智 《探矿工程》2005,32(2):43-43,46

采用小动力无加压旋挖钻机在粒径较大的卵砾石地层和泥页岩地层中进行1500 mm以上大口径钻孔灌注桩施工，由于钻机动力小且不能加压，用常规嵌岩短螺旋钻头钻进出现进尺慢或不进尺现象。通过对河南西峡县宛西制药责任有限公司新厂房桩孔施工过程中出现此种现象的分析和处理，提出了嵌岩短螺旋钻头针对性的改进措施，并取得了良好效果。  相似文献   

受控定向钻进技术在福建马坑矿区的应用          下载免费PDF全文

邹道全 《探矿工程》2016,43(1):70-74,80

重点介绍了福建马坑矿区ZK8321分支孔受控定向钻进技术。施工中运用了国内先进的螺杆钻造斜技术及光纤陀螺测量定向技术,避开上部复杂孔段（松散破碎层、溶洞地层、采空区等）及对勘探工作的影响,达到了施工目的;总结了施工技术难点与措施,分析了施工技术效果,积累了宝贵的施工经验。  相似文献   

Field Evaluation of the Vertical Bearing Capacity of a Screw Pretensioned Spun High-Strength Concrete Pile     

Yongkyu Choi  Dong-Chul Kim  Tae-Hyung Kim 《Marine Georesources & Geotechnology》2016,34(5):474-485

This study has evaluated the vertical bearing capacity by conducting static load tests for noise-free and vibration-free screw pretensioned spun high-strength concrete (PHC) piles installed using two different methods (end-squirting shoe and pre-boring methods). Vertical bearing capacity differences seem to occur due to the displacement of soils near the external circumference of a pile, depending on the installation method. A method by which to evaluate the bearing capacity of screw concrete piles is suggested by considering the equations that already have been used to calculate the bearing capacity of piles. Based on static load tests and analysis, the pile installed using the end-squirting shoe method was assumed to be a bored pile and it was reasonable to use the equation proposed by the Japanese Geotechnical Society. At the same time, the pile installed using the pre-boring method was deemed a low soil displacement pile and so it was reasonable to apply the equations proposed for calculating the bearing capacity of the driven pile suggested by the Architectural Institute of Japan.  相似文献   

Development of Prebored Screw Pile Method and Evaluation of Its Bearing Characteristics     

Chung-Won Lee  Sung-Yong Park 《Marine Georesources & Geotechnology》2016,34(1):42-56

The pile-driving method produces considerable noise and vibrations. Hence, an auger-drilled pile method was developed as a low-noise and -vibration substitute. However, this method does not guarantee the bearing capacity of the pile unless some amount of pile-driving is performed. Therefore, the noise and vibration problems cannot be completely solved. In this study, a prebored screw pile method is proposed to solve these problems. In this method, piles are constructed by the rotary penetration of a screw pile into a prebored hole filled with some cement milk and whose diameter is smaller than that of the screw pile. To determine the shape of the screw pile, laboratory tests with model screw piles were conducted. Also, field load tests were conducted on an actual screw pile fabricated based on the laboratory test result and on a smooth-surfaced pile. In addition, the behavior of the screw pile was estimated by using three-dimensional finite element analysis. The results of the field load test and the numerical simulation showed that the ultimate bearing capacity and the unit skin friction of the screw pile are very superior to those of the smooth-surfaced pile and the cement milk is an important factor in the prebored screw pile method.  相似文献   

上海市东方医院青岛分院钻孔桩施工技术     

李先经 《探矿工程》2018,45(12):64-68

上海市东方医院（同济大学附属东方医院）青岛分院桩基工程,工程量大,工期紧,因上部存在填土、淤泥质土,地层条件较复杂。根据工程实际情况采用了旋挖钻机、冲击钻机、回转钻机成孔工艺,采取加长钢护筒、泥浆护壁等技术措施,有效解决了缩径、孔壁坍塌问题,保质保量按期完成了施工任务,取得了很好的经济和社会效益。  相似文献   

贵州省复杂地层地热深井钻探工艺   总被引：9，自引：0，他引：9  

宋继伟 《地质与勘探》2018,54(5):1024-1037

贵州省地矿局组织实施了“贵州省地热深井钻探技术攻关”项目,研究了喀斯特地区复杂地层情况下地热深井钻探中螺杆钻井工艺和空气钻井工艺的适应性,攻克了两种工艺在该地区应用受地层特性限制的相关技术难题。螺杆马达平均寿命达到200小时以上,螺杆钻井工艺较常规钻井工艺钻进机械钻速提高2～3倍;空气潜孔锤单井应用深度超过1500m,空气潜孔锤钻井工艺较常规钻井工艺机械钻速提高10～29.5倍。同时研究了单井多工艺转换接力钻进技术,以及与上述工艺配套使用的钻井液体系。最终形成了一套适合贵州省地质条件地热深井钻探施工并能显著提高钻井效率和经济效益的组合工艺技术体系。该成果能将1口2000m以上地热深井施工周期由原来的8~12个月缩短至4~6个月,将单井平均施工成本由450万元降低至410万元以下。  相似文献   

煤矿井下碎软煤层瓦斯抽采钻孔钻进工艺          下载免费PDF全文

郝世俊  殷新胜  方俊 《探矿工程》2021,48(S1):173-180

碎软煤层在我国煤矿区分布广泛,具有瓦斯含量高、压力大、渗透率低等特征,在碎软煤层中钻进存在喷孔、塌孔、排渣不畅等问题,导致碎软煤层钻进困难、孔内事故频发,进而影响成孔深度和成孔率,造成瓦斯治理盲区;尤其是随着我国煤矿开采深度的增加,碎软煤层瓦斯抽采孔工作量和成孔难度不断增大。针对碎软煤层瓦斯抽采对钻孔施工需求,研究开发了高转速螺旋钻进工艺、中风压空气钻进工艺、气体定向钻进工艺等实用、经济的碎软煤层高效钻进技术,破解了碎软煤层钻孔排渣护孔、轨迹控制和高效成孔等方面难题,实现了碎软煤层钻孔在服役周期内的长效利用,相关技术在安徽、贵州、山西等地区成功推广应用,达到高效、精准抽采的目的,为矿井安全生产提供了技术保障。  相似文献