Wave Loads and Protective Techniques of An On-Shore Wave Power Device     

You Yage YuZhi Associated Professor  Guangzhou Institute of Energy Conversion  Chinese Academy of Sciences  Guangzhou . Professor  Guangzhou Institute of Energy Conversion  Chinese Academy of Sciences  Guangzhou 《中国海洋工程》1995,(4)

In this paper, the extreme wave loads on an on-shore wave power device are investigated. First, boundary element method is applied to solve the three dimensional potential problem based on the small amplitude wave assumption. Then the motion of the Oscillating Water Column (OWC) inside the device and its laods on the device are calculated in time domain. Several protective techniques often applied are simulated by changing the constraint of the upper end of the chamber of the device. Numerical results are used to judge the effectiveness of these techniques. The investigation shows that damping can not effectively restrain the motion of OWC when the period of incident wave is long, which may cause dangerous loads on the structure. The shut chamber can effectively restrain the motion of OWC, but alternatively cause high pressure in the chamber. A Contracting opening with a Taper (CT) can exhaust a great amount of kinetic energy of OWC, and significantly decrease the loads. It is a promising protective tec  相似文献   

陀螺经纬仪的读数方法比较研究   总被引：2，自引：0，他引：2  

万朋  李宗春  李广云  张冠宇  牟爱国 《海洋测绘》2005,25(5):75-78

介绍了陀螺定向测量中三种不同的数据采集方法，分析了各种方法的优缺点。作者认为传感器采集数据自动化程度高，精度高，特别是运用位置敏感探测器（PSD）采样数据量大，具有一定的抗干扰能力，但在运用传感器采样时必须注意克服非线性误差。  相似文献   

可调滞回模型的磁流变阻尼器及其试验   总被引：5，自引：0，他引：5  

杨飓  关新春  欧进萍 《地震工程与工程振动》2002,22(2):115-120

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。  相似文献   

Interpretation of charging on fracture or frictional slip surface of rocks     

Akihiro Takeuchi  Hiroyuki Nagahama 《Physics of the Earth and Planetary Interiors》2002,130(3-4):285-291

Fracturing and frictional sliding of quartz and granite under dry condition generates fractoluminescence, charged particle emission and electromagnetic radiation. Various kinds of experiments indicate that surface charge density on fracture or frictional slip surface of quartz and granite is 10⁻⁴ to 10⁻² C/m² which is larger than bound charges induced by the disappearance of piezoelectricity due to the release of stress. Hole and electron trapping centers, which is found in semiconductor devices with the Si–SiO₂ system, are causes of surface charging on fracture or frictional slip surface of quartz crystal. The quantity of the surface charge is enough to cause corona discharge that can generate earthquake lights. The mechanism considering the hole and electron trapping centers has a probability to explain why non-piezoelectric minerals or rocks generate electromagnetic phenomena. It can be one of origins of seismo-electromagnetic phenomena (SEP).  相似文献   

Optimal placement of dampers and actuators based on stochastic approach     

Franklin Y. Cheng  Hongping Jiang  Xiaozhe Zhang Ph.D. Candidate 《地震工程与工程振动(英文版)》2002,1(2):237-249

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.  相似文献   

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析     

李慧峰  张玉蓉 《地震研究》2002,25(1)

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架  相似文献   

野外简易脱气装置简介   总被引：1，自引：3，他引：1  

许秋龙  李新勇  范博晴 《内陆地震》2002,16(4):355-359

根据水力学原理结合水氡在实验室分析中水样鼓泡脱气的方法 ,进行了大量的野外试验 ,研制开发了野外简易脱气装置。通过几个月的试观测 ,脱气装置气流稳定 ,脱气效率高 ,完全可以满足自动化观测仪器对气量的需求。该装置解决了地下水化学在野外冷水泉无法进行气体观测的难题 ,而且制作简单、费用低廉 ,非常便于推广。  相似文献   

设备树在路灯AM/FM/GIS系统中的应用研究   总被引：1，自引：0，他引：1  

杨建军  闾国年  宋亚超 《地理与地理信息科学》2003,19(5):35-38

该文提出了AM／FM／GIS中基于“设备树”的设备设施管理模式，运用“设备树”来组织路灯电力网络中的设备设施对象；阐述了如何从设备设施的物理模型抽象出具有树状层次结构的逻辑网络模型，并根据该逻辑模型设计相应的数据结构来构建“设备树”；并介绍了设备树在南京市路灯AM／FM／GIS系统中的设计与实现。  相似文献   

比值参数在高密度电法中的应用     

杨润海  赵晋明  王彬  李正光  卢吉高  曾祥凤 《地震研究》2003,26(2):197-200

探讨了比值参数在高密度电阻率法中的应用；根据工程实例说明比值参数在压制局部干扰和邻近异常分离中有良好效果；将比值参数断面与电阻率反演断面比较研究，能取得较好的异常解释效果。  相似文献   

微型无人驾驶飞机探空初步试验研究   总被引：4，自引：1，他引：4  

马舒庆 《南京气象学院学报》1997,20(2):171-177

对具有自动导航，自动驾驶功能的微型无人驾驶飞机探空的可行性进行了初步研究。设计了水平空速归零测风方式，利用全球定位系统测风，进行了微型无人驾驶飞机探测试验。研究表明，微型无人驾驶飞机可成为一种方便，经济，灵活的探空工具。  相似文献