准噶尔盆地玛湖凹陷西斜坡三叠系百口泉组扇三角洲优质储集层预测          下载免费PDF全文

桑林翔  刘军  王贵文  王苏天  李全  张云龙 《古地理学报》2020,22(6):1053-1064

针对准噶尔盆地玛湖凹陷西斜坡风南地区三叠系百口泉组扇三角洲砂岩物性空间变化大、优质储集层(孔隙度大于7.4%,渗透率大于0.05×10^-3μm²)预测难的问题,在沉积岩石学、地震沉积学以及地震反演和解释理论指导下,综合利用测井、岩心和三维地震等资料开展了高精度层序地层划分、沉积微相描述和优质储集层地震反演研究。建立了风南井区四级层序地层格架,明确了扇三角洲多期水进水退的充填过程,指出SSQ3和SSQ5是优质储集层的发育层系;识别出扇三角洲平原分流河道、河道间和扇三角洲前缘水下分流水道、河口坝、席状砂等沉积微相,指出扇三角洲平原是优质储集层发育相带;通过应用高分辨层序地层纵向边界和沉积相横向边界约束,进行分层相控叠后地震波阻抗反演,提升储集层预测精度,在SSQ3和SSQ5预测5个优质储集层发育区,提出3口井的井位建议,钻探均获工业油流。  相似文献   

东海盆地中、新生代盆架结构与构造演化   总被引：6，自引：0，他引：6  

刘金水  许怀智  蒋一鸣  王军  何新建 《地质学报》2020,94(3):675-691

基于地貌、钻井、岩石测年和地震等资料,分析盆地地层分布、盆架结构、构造单元划分和裂陷迁移规律,结果表明东海盆地由台北坳陷、舟山隆起、浙东坳陷、钓鱼岛隆褶带和冲绳坳陷构成,是以新生代沉积为主、中生代沉积为辅的大型中、新生代叠合含油气盆地;古元古代变质岩系构成了盆地的基底。该盆地不仅是印度-太平洋前后相继的动力体系作用下形成的西太平洋沟-弧-盆构造体系域一部分,而且也是古亚洲洋动力体系作用下形成的古亚洲洋构造域和特提斯洋动力体系作用下形成的特提斯洋构造域一部分,晚侏罗世至早白垩世经历了构造体制转换,盆地格局发生重大变革,早白垩世以前主要受古亚洲-特提斯洋构造体制影响的强烈挤压造山和地壳增厚作用演变为早白垩世以来主要受太平洋构造体制控制的陆缘伸展裂陷和岩石圈减薄作用,经历侏罗纪古亚洲-特提斯构造体制大陆边缘拗陷和白垩纪以来太平洋构造体制弧后裂陷两大演化阶段。白垩纪以来太平洋构造体制的弧后裂陷演化阶段可细分为早白垩世至始新世裂陷期、渐新世至晚中新世拗陷期和中新世末至全新世裂陷期。  相似文献   

新疆和田地区耕地面源污染生态风险评价          下载免费PDF全文

田丰收  刘新平  原伟鹏 《干旱区地理》2019,42(2):295-304

随着化肥、农膜等在农业生产中的过量投入，耕地面源污染的程度随之加重。文章选取塔里木河流域上游和田地区为研究区域，依据P-S-R框架理论，构建和田地区耕地面源污染生态风险评价指标体系，加入土壤理化数据，使用生态风险评价模型对和田地区1980 年及2016 年耕地面源污染状况进行生态风险评价，运用耕地生态风险模型、生态风险转移矩阵、Arcgis分析和田地区耕地面源污染时空分异状况。研究结论如下：和田地区1980 年耕地生态风险等级均为II级或III级，呈“中间高，两侧低”分布；2016 年耕地生态风险等级上升至IV级或V级，呈“倒W型”分布，各县耕地面源污染程度较1980 年均有较大幅度的上升，其中墨玉县和于田县在2016 年耕地生态风险等级达到最高的V级，而民丰县因自身生态环境的强脆弱性，同样需要提高关注。根据面源污染“从源头治理”的原则，应切实推进和田地区耕地生态环境保护与治理，提高政府重视程度，增强技术指导，开展试点工作，改善和田地区耕地面源污染现状。  相似文献   

Fully coupled hydraulic fracture simulation using the improved element partition method     

Shujun Peng  Zhennan Zhang  Jianye Mou  Bing Zhao  Zhiyuan Liu  Jiading Wang 《国际地质力学数值与分析法杂志》2019,43(1):441-460

The improved element partition method (IEPM) is a newly developed fracture simulation approach. IEPM allows a fracture to run across an element without introducing extra degrees of freedom. It can also simulate any number of fractures in a prescribed mesh without remeshing. In this study, the IEPM is extended to hydraulic fracture simulation. First, the seepage and volumetric storage matrix of a cracked element are derived using virtual nodes (the intersection points of a crack with element edges). Subsequently, the fully coupled hydromechanical equation is derived for this cracked element. To eliminate the extra degrees of freedom (virtual nodal quantities), the water pressure and displacement of the virtual nodes are associated with their adjacent nodes through least squares interpolation. Finally, the fully coupled equation in terms of nodal quantities is obtained. The verification cases validate the method. By using this method, the field-scale hydraulic fracturing process is well simulated. The proposed approach is simple and efficient for field-scale hydraulic fracture simulation.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

基于MINA框架的应急救助与地震灾情管理平台设计与实现     

肖本夫  申源  陈维锋  毛利  格桑扎西  梁厚朗 《震灾防御技术》2020,15(4):836-845

针对不同用户群体应急救助和地震灾情需求，基于MINA框架，运用阿里云基础架构、微信组件和应用程序接口等技术方法，设计并构建集灾情信息收集与报送、应急救助服务、科普宣教等功能于一体的管理平台。该平台的设计与实现不仅有利于震后现场应急队员收集并准确报送实时灾情信息，还可为被救助人员提供防震减灾知识和地震应急避难场所空间分布等应急救助信息，实现了应急救助与地震灾情的综合管理，提升了震后应急救助、应急指挥和辅助决策等方面的服务能力。  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

城市中心体系研究的理论基础与分析框架     

晏龙旭  王德  张尚武 《地理科学进展》2020,39(9):1576-1586

“经济—空间”视角下城市中心体系的理论与实证研究之间缺少相互衔接的分析框架。论文通过对经典理论的系统归纳与演绎,建立整体视角下理解城市中心体系形成与发展的理论框架,将城市中心体系的发展规律概括为空间竞争和空间联系2个机制,体现在本地服务功能和非本地功能的空间组织过程,分别形成等级网状结构和专业化点状结构,并相互融合形成“半网格”的城市中心体系,扮演着本地与宏观区域结构之间的“转换发动机”。最后探讨了对实证研究的若干启示,提出城市中心的定义和识别方法应注意与理论研究相互衔接;认为城市中心的本地/非本地功能特征及相应的发展机制亟待实证;认为中心及其空间影响的调控潜力是制定规划政策的前提。  相似文献   

自然资源全要素自适应野外调查框架设计     

刘立  刘娟  陈宏宇  李维庆 《测绘通报》2020,(1):107

针对自然资源全要素调查工作中分类标准不同、调查口径不同、调查方法不同，造成的各部门调查软件平台重复开发建设和调查数据结果地理信息特征表达不清晰等问题，本文结合自然资源全要素野外调查工作的实际需要，以山水林田湖草生命共同体为统一对象，构建了自然资源语义化特征模型，提出了表征不同自然资源类型的自适应野外调查方法，实现了灵活性高、性能优异的自然资源调查技术平台，形成了统一的自然资源全要素野外调查框架，可以有效提升多门类自然资源基础调查、专业调查、动态调查的能力与水平，为自然资源治理能力现代化提供了可靠技术保障。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献