中国草畜平衡状态时空演变指示的草地生态保护格局   总被引：2，自引：0，他引：2  

黄麟  翟俊  祝萍  郑瑜晗 《地理学报》2020,75(11):2396-2407

中国草原牧区作为重要生态安全屏障和草地畜牧业生产基地,其草畜平衡状态直接影响草地退化与恢复,进而影响草地生态系统服务能力的强弱。本文分析了2000—2015年主要草原牧区草地植被覆盖、牧草供给、草畜平衡状态的时空变化特征,深入探讨草地退化与恢复及载畜压力下草地生态系统保护与恢复空间格局。结果表明：过去16年主要草原牧区草地面积净减少约163万hm²,6.7%的草地出现植被覆盖退化,而5.4%的草地呈现植被覆盖明显恢复。天然草地牧草供给量以增加为主,年增率约0.3 kg/hm²,然而其载畜压力亦持续增加,不考虑补饲的载畜压力指数高达3.8,除内蒙古东北部、青藏高原中部仍有载畜潜力,其余多处于超载状态;考虑实际冷季补饲的载畜压力指数约3.1,内蒙古中东部有所缓解;假设冷季全额补饲则载畜压力指数减至1.9,内蒙古、青藏高原等区域明显缓解。叠加上述数据,本文针对自然保护地、牧区、半农半牧区和农区等不同区域的草地生态保护格局,提出了平衡草地生态保护与畜牧生产利用的不同发展策略。  相似文献   

广盐性鱼类渗透压适应性与生理可塑性机制研究     

马爱军  崔文晓  刘志峰  张金生  黄智慧  杨双双  刘晓菲  杨凯  张薇 《海洋与湖沼》2018,49(6):1308-1317

拥有强大的渗透压调节能力对广盐性鱼类的生存至关重要。目前,关于鱼类渗透压调节机制已有不少研究,但均存在较大的局限性。本文从广盐性鱼类渗透压信号转导机制、渗透胁迫的细胞调控机制、渗透调控的内分泌调节机制和无机离子通道和转运蛋白介导的渗透调控等方面对广盐性鱼类的渗透压适应性和生理可塑性机制进行分析,以期从分子、细胞、通路和生理等层次初步探索广盐性鱼类盐度胁迫后的可塑性表型变化和不同盐度条件下的应答机制,为广盐性鱼类的渗透压调节机制的深入研究奠定基础。对广盐性鱼类渗透压适应性与生理可塑性机制研究,有助于研究其环境适应机理,促进野生鱼种的人工化养殖以及新品种的育种从而提高经济效益、社会效益和生态效益,对促进水产养殖学进步以及养殖业的发展具有重要意义,同时,为研究广盐性鱼类的渗透压调节机制开辟新的研究方向。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

隧道工程地质评价的内容和方法   总被引：2，自引：0，他引：2  

陈新建  孙琳  李新星  孙巧银 《地球科学与环境学报》2004,26(1):41-45

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.  相似文献   

浙西北江山─绍兴断裂带构造演化特征     

竺国强  姜继双  陈梓军  周培华 《浙江国土资源》1997,(2)

江山—绍兴断裂带是中国南方最重要的构造带之一。它是江南陆块与华夏陆块神功运动形成的碰撞拼贴带。它表现出明显的多期变形、构造叠加的特征：神功运动形成近东西向平卧褶皱；印支运动沿断裂带有向北西强烈的推覆挤压。断裂带不同时期的活动反映了不同特征的构造环境，形成不同的构造变形特征，并对两侧的地质历史具有明显的控制作用。  相似文献   

Modelling of deformation response and chemo‐mechanical coupling in chalk     

S. Pietruszczak  D. Lydzba  J. F. Shao 《国际地质力学数值与分析法杂志》2006,30(10):997-1018

A constitutive relation is derived for describing the mechanical response of chalk. The approach is based on a phenomenological framework which employs chemo‐plasticity. The properties of the material are assumed to be affected by the physico‐chemical processes that occur through the interaction between the skeleton and the pore fluid. The underlying mechanism is discussed by invoking a micromechanical analysis. The performance of the framework is illustrated by examining the evolution of mechanical characteristics in the presence of different pore fluids. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

地下洞库勘察中的深斜孔钻探和压水试验技术          下载免费PDF全文

吉孟瑞  孙桂明  吴昌庆  原华山 《山东国土资源》2001,17(2):56-60

青岛市黄岛区拟建设海底地下油气储藏库,前期地质勘察工作要求施工倾角45°、深220m的取心钻孔4个,并在孔内分段进行压水试验.本文介绍了如何利用XY-4型金刚石小口径钻机施工基岩深斜孔及压水试验技术.  相似文献