脐带缆螺旋滑移分析及力学性能研究   总被引：1，自引：0，他引：1  

李英  吴潘  冯雅萍  曹静萱 《海洋工程》2018,36(6):58-68

针对脐带缆内部螺旋层,应用Darboux标架建立螺旋结构空间坐标系,推导弯曲载荷下螺旋结构的局部变形和滑移。考虑螺旋构件间的接触和摩擦作用,建立螺旋结构的受力平衡偏微分方程,并研究螺旋角和摩擦系数对螺旋结构滑移的影响。基于同层螺旋结构本构关系相同假设,将所有螺旋结构力学性能线性叠加,拟合脐带缆整体弯曲刚度。运用建立的理论解析方法,对某双层铠装脐带缆的力学性能进行研究,并与数值模拟结果进行对比验证。对比结果表明,理论解析得到的螺旋滑移结果与数值模拟结果一致,理论解析得到的脐带缆弯曲刚度与数值模拟结果在全滑动阶段比较接近。  相似文献   

Evolutionary Processes in Low-Mass Binary Systems     

Peter P. Eggleton  Ludmila Kisseleva-Eggleton 《Astrophysics and Space Science》2005,296(1-4):327-336

We consider the evolution of certain low-mass binaries, incorporating models of (a) internal evolution, (b) tidal friction, (c) dynamo activity driven by an elementary α,Ω dynamo, (d) stellar wind driven by the activity, and (e) magnetic braking as a consequence of wind and poloidal dynamo-generated magnetic field. In some circumstances the stellar wind is found to remove mass on a nuclear timescale, as is necessary to explain some observed systems. We can hope that various uncertainties in the model may be clarified by a careful comparison of the models with such observed quantities as rotation periods. These are modified by processes (a), (b) and (e). Assuming that stellar evolution is slow, rotation rate should in some circumstances represent a balance between magnetic braking trying to slow the star down and tidal friction trying to spin it up. Preliminary attempts are promising, but indicate that some fine tuning is necessary. When there is a third body present, in an orbit which is inclined but not necessarily of short period, the eccentricity of a close binary can be strongly modified by ‘Kozai cycles’. We show that this may complicate attempts to account for spin rates of stars in close binaries.  相似文献   

西安地区单桩桩土相互作用数值模拟分析   总被引：1，自引：0，他引：1  

魏静  王建华  李永林 《地球科学与环境学报》2003,25(3):63-66

随着计算机技术和数值方法的不断发展和完善,使有限元法得到越来越多的应用。根据西安地区原型摩擦桩的地层特点和土性条件,运用有限元基础理论,利用相应的边界条件与假设条件,建立单桩数学模型。通过模型研究了单桩的沉降特性与土共同作用的影响因素,对西安地区单桩桩土相互作用机理进行了探讨。  相似文献   

Electromagnetic signals associated with stick–slip of quartz-free rocks     

Akito Tsutsumi  Nobumasa Shirai 《Tectonophysics》2008,450(1-4):79-84

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.  相似文献   

Biaxial test simulations using a packing of polygonal particles   总被引：1，自引：0，他引：1  

A. A. Peña  A. Lizcano  F. Alonso‐Marroquin  H. J. Herrmann 《国际地质力学数值与分析法杂志》2008,32(2):143-160

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

高桩码头桩基负摩擦力现场试验研究 ——上海洋山深水港工程现场试验   总被引：1，自引：0，他引：1  

肖俊华  周国然  袁聚云  赵锡宏 《岩土力学》2008,29(4):1097-1102

高桩码头接岸结构中的桩基础,在抛石的作用下将产生负摩擦力。通过支撑桩及自由桩上负摩擦力的现场试验研究,获得抛石过程中基桩内力随深度变化的基本规律。抛石过程中基桩上的负摩擦力主要产生在抛石段。同时,抛石作为附加荷载,将引起下方软弱土层的固结沉降,桩土之间产生相对位移,从而在抛石段下方一定范围内也产生负摩擦力作用。承台荷载对负摩擦力的大小和分布有着重要的影响。提出的负摩擦力分布规律和采用有效应力法计算层状土负摩擦力的公式,可为桩基础的设计,尤其对水下单面抛石施工的设计及采取消减负摩擦力的措施提供依据。  相似文献   

Model Test of Sand Restraining Force on Pipeline     

Zhang Jianguo Yan Chi Yan Shuwang Lecturer  Dept. of Hydraulic Eng.  Tianjin University  Tianjin Associate Professor  Dept. of Hydraulic Eng.  Tianjin University  Tianjin Professor  Dept. of Hydraulic Eng.  Tianjin University  Tianjin 《中国海洋工程》1996,(1)

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.  相似文献   

考虑底摩擦的波浪折射计算   总被引：2，自引：0，他引：2  

蒋德才  张琦 《中国海洋大学学报(自然科学版)》1988,(3)

本文用考虑底摩擦的折射模式计算了浅水中波高和波向分布。作为一个例子,根据不同的摩擦系数和不同的边界条件计算了一种简单海底地形的折射系数、衰减系数和折射角,所得结果与不考虑底摩擦的折射模式结果进行比较,发展它们之间存在一些差异,表明在浅水中底摩擦对波高有一定影响。  相似文献   

渤、黄、东海底摩擦系数的研究     

孙丽艳  吕咸青 《海洋湖沼通报》2007,(2):7-12

本文将伴随法用于渤、黄、东海M2分潮的数值模拟,利用Topex／Poseidon高度计资料进行同化,优化海底摩擦系数。文中对底摩擦系数取常数时进行了优化,同时还对底摩擦系数的一种新的处理方法进行了研究,即在计算海区选取一些点给定底摩擦系数,海区中任意一点的底摩擦系数由这些点的底摩擦系数线性播值得到,优化后得到空间分布的底摩擦系数。针对两种不同的线性底摩擦假设分别进行了一系列的实际实验,结果表明由空间分布的底摩擦系数得到的模拟值比底摩擦系数取常数得到的模拟值更接近观测值,能有效地提高数值模拟的精度。  相似文献   

Depth- and current-induced effects on wave propagation into the Altamaha River Estuary, Georgia     

KiRyong Kang  Daniela Di Iorio   《Estuarine, Coastal and Shelf Science》2006,66(3-4):395-408

A study of sea surface wave propagation and its energy deformation was carried out using field observations and numerical experiments over a region spanning the midshelf of the South Atlantic Bight (SAB) to the Altamaha River Estuary, GA. Wave heights on the shelf region correlate with the wind observations and directional observations show that most of the wave energy is incident from the easterly direction. Comparing midshelf and inner shelf wave heights during a time when there was no wind and hence no wave development led to an estimation of wave energy dissipation due to bottom friction with corresponding wave dissipation factor of 0.07 for the gently sloping continental shelf of the SAB. After interacting with the shoaling region of the Altamaha River, the wave energy within the estuary becomes periodic in time showing wave energy during flood to high water phase of the tide and very little wave energy during ebb to low water. This periodic modulation inside the estuary is a direct result of enhanced depth and current-induced wave breaking that occurs at the ebb shoaling region surrounding the Altamaha River mouth at longitude 81.23°W. Modelling results with STWAVE showed that depth-induced wave breaking is more important during the low water phase of the tide than current-induced wave breaking during the ebb phase of the tide. During the flood to high water phase of the tide, wave energy propagates into the estuary. Measurements of the significant wave height within the estuary showed a maximum wave height difference of 0.4 m between the slack high water (SHW) and slack low water (SLW). In this shallow environment these wave–current interactions lead to an apparent bottom roughness that is increased from typical hydraulic roughness values, leading to an enhanced bottom friction coefficient.  相似文献