Thresholds for post-wildfire debris flows: Insights from the Pinal Fire,Arizona, USA     

Carissa A. Raymond  Luke A. McGuire  Ann M. Youberg  Dennis M. Staley  Jason W. Kean 《地球表面变化过程与地形》2020,45(6):1349-1360

Wildfire significantly alters the hydrologic properties of a burned area, leading to increases in overland flow, erosion, and the potential for runoff-generated debris flows. The initiation of debris flows in recently burned areas is well characterized by rainfall intensity-duration (ID) thresholds. However, there is currently a paucity of data quantifying the rainfall intensities required to trigger post-wildfire debris flows, which limits our understanding of how and why rainfall ID thresholds vary in different climatic and geologic settings. In this study, we monitored debris-flow activity following the Pinal Fire in central Arizona, which differs from both a climatic and hydrogeomorphic perspective from other regions in the western United States where ID thresholds for post-wildfire debris flows are well established, namely the Transverse Ranges of southern California. Since the peak rainfall intensity within a rainstorm may exceed the rainfall intensity required to trigger a debris flow, the development of robust rainfall ID thresholds requires knowledge of the timing of debris flows within rainstorms. Existing post-wildfire debris-flow studies in Arizona only constrain the peak rainfall intensity within debris-flow-producing storms, which may far exceed the intensity that actually triggered the observed debris flow. In this study, we used pressure transducers within five burned drainage basins to constrain the timing of debris flows within rainstorms. Rainfall ID thresholds derived here from triggering rainfall intensities are, on average, 22 mm h⁻¹ lower than ID thresholds derived under the assumption that the triggering intensity is equal to the maximum rainfall intensity recorded during a rainstorm. We then use a hydrologic model to demonstrate that the magnitude of the 15-min rainfall ID threshold at the Pinal Fire site is associated with the rainfall intensity required to exceed a recently proposed dimensionless discharge threshold for debris-flow initiation. Model results further suggest that previously observed differences in regional ID thresholds between Arizona and the San Gabriel Mountains of southern California may be attributed, in large part, to differences in the hydraulic properties of burned soils. © 2019 John Wiley & Sons, Ltd.  相似文献   

Investigation of the elevation of saltwater wedge due to subsurface dams     

Qinpeng Chang  Tianyuan Zheng  Youyuan Chen  Xilai Zheng  Marc Walther 《水文研究》2020,34(22):4251-4261

Subsurface dams are rather effective and used for the prevention of saltwater intrusion in coastal regions around the world. We carried out the laboratory experiments to investigate the elevation of saltwater wedge after the construction of subsurface dams. The elevation of saltwater wedge refers to the upward movement of the downstream saltwater wedge because the subsurface dams obstruct the regional groundwater flow and reduce the freshwater discharge. Consequently, the saltwater wedge cannot further extend in the longitudinal direction but rises in the vertical profile resulting in significant downstream aquifer salinization. In order to quantitatively address this issue, field-scale numerical simulations were conducted to explore the influence of various dam heights, distances, and hydraulic gradients on the elevation of saltwater wedge. Our investigation shows that the upward movement of the saltwater wedge and its areal extension in the vertical domain of the downstream aquifer become more severe with a higher dam and performed a great dependence on the freshwater discharge. Furthermore, the increase of the hydraulic gradient and the dam distance from the sea boundary leads to a more pronounced wedge elevation. This phenomenon comes from the variation of the freshwater discharge due to the modification of dam height, location, and hydraulic gradient. Large freshwater discharge can generate greater repulsive force to restrain the elevation of saltwater wedge. These conclusions provide theoretical references for the behaviour of the freshwater–seawater interface after the construction of subsurface dams and help optimize the design strategy to better utilize the coastal groundwater resources.  相似文献   

多点液压式波浪能海水淡化系统建模与仿真   总被引：1，自引：1，他引：0  

胡缘  杨绍辉  何宏舟  陈沪  郑松根  张迪 《海洋工程》2019,37(1):134-141

为缓解淡水资源短缺及化石能源过度使用问题,提出多点液压式波浪能海水淡化系统,该系统主要由采能装置、液压传递系统与反渗透膜海水淡化设备组成。系统的采能装置采用振荡浮子式,可将波浪能转换为浮子振荡从而被液压系统吸收达到采集波浪能的目的。为了提高液压式波浪能海水淡化系统的采能效率及淡水率,利用AMEsim软件对液压传递系统进行建模与仿真,分析了蓄能器、浮子个数及波高对液压传递系统输出响应的影响。结果表明:蓄能器能够使液压马达的输出响应更加稳定;当浮子的数量增加时,液压系统达到稳定的运行状态所需的时间更短,从而有利于提高系统的效率;波高在2 m左右时,本系统的产水量达到最大。  相似文献   

CMD180T型钻机在尚义地热井施工中的应用          下载免费PDF全文

王雷浩  李光宏  石逊  殷邈 《探矿工程》2020,47(1):58-61

经物探分析在河北省张家口尚义县大青沟镇南海子村东南1.0 km存在深部断裂构造，为了寻找开发坝上地区地热资源，决定在该位置施工一口2000 m深地热井，即穿过该断裂构造寻找导水通道，完成地热井施工任务。施工中采用了CMD180T型钻机，该钻机采用了先进的全液压传动系统，自动化程度高，性能优异，可大大降低操作人员的劳动强度且易于搬迁、易于操作。其优势在这次地热井工程施工过程中得到了充分的体现。  相似文献   

极地冰钻关键技术研究进展          下载免费PDF全文

张楠  王亮  Pavel Talalay  范晓鹏  王如生  杨阳  洪嘉琳  宫达  孙友宏  李院生  李冰 《探矿工程》2020,47(2):1-16

极地冰钻技术是获取冰芯，研究冰盖-冰架-海洋相互作用，以及获取极地冰下基岩与冰下水环境样品，开展冰下环境探测的重要手段。目前极地冰钻技术的难点与前沿主要包括深冰芯钻探、冰架热水钻、冰下基岩钻和冰下水环境采样与观测技术。本文针对以上4个极地冰钻关键技术，对国内外相关技术的研究进展与项目开展情况进行了总结与梳理。综合来看，虽然我国开展极地钻探技术研究起步较晚，但随着我国极地战略不断推进，我国的极地冰钻关键技术与装备的研究正持续向着赶超极地钻探强国方向迈进，这必将为我国的极地科学研究提供强有力的技术支撑。  相似文献   

Intercomparison of measurements of bulk snow density and water equivalent of snow cover with snow core samplers: Instrumental bias and variability induced by observers     

J. Ignacio López-Moreno  Leena Leppänen  Bartłomiej Luks  Ladislav Holko  Ghislain Picard  Alba Sanmiguel-Vallelado  Esteban Alonso-González  David C. Finger  Ali N. Arslan  Katalin Gillemot  Aynur Sensoy  Arda Sorman  M. Cansaran Ertaş  Steven R. Fassnacht  Charles Fierz  Christoph Marty 《水文研究》2020,34(14):3120-3133

Manually collected snow data are often considered as ground truth for many applications such as climatological or hydrological studies. However, there are many sources of uncertainty that are not quantified in detail. For the determination of water equivalent of snow cover (SWE), different snow core samplers and scales are used, but they are all based on the same measurement principle. We conducted two field campaigns with 9 samplers commonly used in observational measurements and research in Europe and northern America to better quantify uncertainties when measuring depth, density and SWE with core samplers. During the first campaign, as a first approach to distinguish snow variability measured at the plot and at the point scale, repeated measurements were taken along two 20 m long snow pits. The results revealed a much higher variability of SWE at the plot scale (resulting from both natural variability and instrumental bias) compared to repeated measurements at the same spot (resulting mostly from error induced by observers or very small scale variability of snow depth). The exceptionally homogeneous snowpack found in the second campaign permitted to almost neglect the natural variability of the snowpack properties and focus on the separation between instrumental bias and error induced by observers. Reported uncertainties refer to a shallow, homogeneous tundra-taiga snowpack less than 1 m deep (loose, mostly recrystallised snow and no wind impact). Under such measurement conditions, the uncertainty in bulk snow density estimation is about 5% for an individual instrument and is close to 10% among different instruments. Results confirmed that instrumental bias exceeded both the natural variability and the error induced by observers, even in the case when observers were not familiar with a given snow core sampler.  相似文献   

Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes     

Élise G. Devoie  Ryan F. Connon  James R. Craig  William L. Quinton 《水文研究》2020,34(23):4541-4546

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.  相似文献   

Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska     

Olufemi P. Abimbola  Aaron R. Mittelstet  Troy E. Gilmore 《水文研究》2020,34(16):3481-3491

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献   

极端条件下心墙泥浆料的渗透反滤试验研究     

左永振  赵娜 《岩土力学》2020,41(2):520-526

高土石心墙坝的渗透稳定性在很大程度上依赖于反滤层对心墙料的反滤保护作用。心墙在大坝蓄水和长期运行的条件下，要经历复杂的填筑加载、浸水饱和与水荷载的作用，在差异沉降、复杂结构应力作用、水力劈裂和渗透水流作用下，心墙一旦出现裂缝，其渗透稳定性及反滤层的保护作用就将面临严峻的考验。针对这一问题，设计了专门非常规的抛填土料反滤试验和泥浆渗透反滤试验，模拟心墙裂缝条件下其颗粒被冲刷起动后，被反滤料阻挡和淤积过程。试验结果表明，心墙料和反滤料满足反滤准则条件下，心墙颗粒被拦截和淤积在反滤层上游表面，反滤料能有效防止心墙颗粒的流失，反滤层在极端条件下对心墙料仍能起到有效的反滤保护作用。  相似文献