基于双谱滤波的综合脉冲星时算法研究          下载免费PDF全文

周庆勇  魏子卿  张华  刘思伟  孙鹏飞  张奋  姜坤  刘晓刚  李奎 《天文学报》2021,62(2):19-95

毫秒脉冲星的自转频率非常稳定,提供了一种独立的基于遥远自然天体并能持续数百万乃至数十亿年的时间基准,具有稳定性强、运行时间长、服务范围广等特点.为了减弱毫秒脉冲星计时观测中各种高斯噪声对脉冲星时的影响,研究了一种基于双谱滤波的综合脉冲星时构建算法,处理分析了国际脉冲星计时阵(International Pul-sar Timing Array,IPTA)最新发布的4颗毫秒脉冲星(PSR J0437-4715、J0613-0200、J1713+0747和J1909-3744)的观测数据,分析了不同时间尺度综合脉冲星时的稳定性,并与构成国际原子时(International Atomic Time,TAI)的4家授时单位原子钟稳定性进行了比较.结果表明:双谱滤波算法能够较好地抑制观测噪声,提高综合脉冲星时的稳定性.相比于经典加权算法,综合脉冲星时1 yr、10 yr稳定度从7.77×10^-14、8.56×10^-16分别提高到1.50×10^-14、3.50×10^-16,单脉冲星时稳定性的提升也类似.同时发现,综合脉冲星时稳定性在5 yr及以上时间尺度上优于原子钟稳定性,可用于改善当前原子时的长期稳定性.  相似文献   

Orbital control on cyclical organic matter accumulation in Early Silurian Longmaxi Formation shales     

Siding Jin  Hucheng Deng  Xing Zhu  Yan Liu  Sibing Liu  Meiyan Fu 《地学前缘(英文版)》2020,(2):533-545

High resolution(939 samples)total organic carbon content(TOC)analyses were conducted on the Shuanghe Section of^152.6 m in the Changning area,Sichuan Basin.The sampling section was divided into two units considering the distinct-different deposit environment and sediments accumulation rate.The lower part(Unit 1)and the peer part(Unit 2)with high resolution sample spacing(0.08–0.4 m)enables the identification of the precession cycle in two sedimentary sequences with distinct different sedimentary accumulation rate.MTM Power spectral analyses on untuned TOC series reveals significant peaks exceeding above the 95%confidence level and shows that both Unit 1 and Unit 2 have recorded Milankovitch cycles of 405 kyr long eccentricity,short eccentricity,obliquity and precession.The floating astronomical time scale(ATS)was constructed on the Shuanghe Section in the Early Silurian(~439.673–444.681 Ma),and which was calibrated by 405 kyr long eccentricity cycles.The total duration of the Wufeng and Longmaxi shales is 5.01 Myr.The floating ATS used for estimating the duration of the graptolite zones and each stage in the study interval.Finally,we postulated two models that could verify the linkage between orbital cycle and organic accumulation.To make sure whether productivity or preservation is the main factor that under long eccentricity control,the phase correlation between the obtained filtered signal and the theoretical orbital solution should be made clear in the further research.  相似文献   

绿色空间对休闲性体力活动影响的社区分异 ——以广州市为例     

戴颖宜  朱战强  周素红 《热带地理》2019,39(2):237-246

以广州市20个典型社区为例，构建多元线性回归模型，探讨了绿色空间对居民休闲性体力活动的影响，并剖析绿色空间对不同类型社区居民休闲性体力活动影响的作用机制。结果发现：1）不同类型社区居民的休闲性体力活动水平存在明显差异，低档社区的为782.99 MET-min/w，中档社区的为871.70 MET-min/w，高档社区的为1 227.91 MET-min/w；2）影响不同类型社区居民休闲性体力活动水平的绿色空间因素有所不同，低档社区、中档社区和高档社区的显著因子分别为“到最近公园广场距离”“邻里绿化覆盖率”和“健身活动设施数量”；3）绿色空间对休闲性体力活动水平影响的作用机制存在社区差异，低档社区居民休闲性体力活动主要受到成本作用的约束，中档社区居民主要受绿化环境作用影响，而高档社区居民主要受机会作用影响。  相似文献   

东海盆地中、新生代盆架结构与构造演化   总被引：6，自引：0，他引：6  

刘金水  许怀智  蒋一鸣  王军  何新建 《地质学报》2020,94(3):675-691

基于地貌、钻井、岩石测年和地震等资料,分析盆地地层分布、盆架结构、构造单元划分和裂陷迁移规律,结果表明东海盆地由台北坳陷、舟山隆起、浙东坳陷、钓鱼岛隆褶带和冲绳坳陷构成,是以新生代沉积为主、中生代沉积为辅的大型中、新生代叠合含油气盆地;古元古代变质岩系构成了盆地的基底。该盆地不仅是印度-太平洋前后相继的动力体系作用下形成的西太平洋沟-弧-盆构造体系域一部分,而且也是古亚洲洋动力体系作用下形成的古亚洲洋构造域和特提斯洋动力体系作用下形成的特提斯洋构造域一部分,晚侏罗世至早白垩世经历了构造体制转换,盆地格局发生重大变革,早白垩世以前主要受古亚洲-特提斯洋构造体制影响的强烈挤压造山和地壳增厚作用演变为早白垩世以来主要受太平洋构造体制控制的陆缘伸展裂陷和岩石圈减薄作用,经历侏罗纪古亚洲-特提斯构造体制大陆边缘拗陷和白垩纪以来太平洋构造体制弧后裂陷两大演化阶段。白垩纪以来太平洋构造体制的弧后裂陷演化阶段可细分为早白垩世至始新世裂陷期、渐新世至晚中新世拗陷期和中新世末至全新世裂陷期。  相似文献   

非典型周期和气候突变的识别与判定          下载免费PDF全文

秦建国 《水文》2020,40(1):23-28

通过两种新方法分析了无锡站降水年际变化的突变性、周期性等特征,揭示了旱涝演化的自然规律。研究表明,1934、1978、2013年是我国近现代气候突变的临界点,这是旱涝演化的自然选择;无锡站年际降水的观测历史可分成四个特征不同的时段,每个时段节点对应的都是一次气候突变;气候突变会改变年际降水序列的一致性,分段法研究可以大幅度降低模拟难度、提高预测效率。发现并确认了3个气候突变点,实现了超长缺测中断期(13a)旱涝趋势的精确插补,完成了无锡站近百年降雨序列的周期性分析与旱涝趋势预测模拟,研究成果改变了近现代气候历史无法细分的现状。  相似文献   

Experimental study on a sampling technique based on a freeze-sediments valve for deep-sea microorganism     

《Applied Ocean Research》2019

Deep-sea microorganism research has become a hot topic in life science, owing to its special value in high pressure and low temperature environment. If not kept the in-situ low temperature and high pressure, it will cause the microorganism to lose its activity and lead to a waste of resources. A freeze-sediments valve presents a promising solution to maintain the low temperature and high pressure in situ, improve the success rate of sampling and shorten the sampling time. A series of experiments were conducted to characterize the freeze-sediments valve, including the sampling time without leakage, adaptation to different sediments and the effect of the length, etc. Most important of all, temperature change of sediments is observed in all experiments. Experimental results indicated that the freeze-sediments valve was formed in 5 min without leakage and the freeze-sediments valve could be applied to different sediments without limitations on sediments type and mineral content. Considering the pressure retaining capacity and formation time of freeze-sediments valve, it was found that the freeze-sediments valve with a length of 60–80 mm has good pressure retaining capacity whose value was 41.3–48.4 Mpa and short formation time which was 5 min. Precooling the sampler could be used to shorten the sampling time in the actual environment application. This sampling technique can play a vital role in maintaining in-situ low temperature at −2 to −4 ° Celsius in all the experiments. According to the tests, the sampling technique based on the freeze-sediments valve had the potential to solve the problem of keeping in-situ temperature, low sampling success rate and long sampling time in the future.  相似文献   

经济地理学制度理论的发展与建构的重要方向     

傅沂  赵子奇 《热带地理》2019,39(5):711-720

在中国制度差异显著与目前区域发展不平衡不充分的现实下,经济地理学与制度相结合的研究显得尤为必要。通过系统地梳理经济地理学与制度的关系发现,经济地理学与制度在历史上存在先分离后融合的情况,并且目前经济地理学与制度研究结合态势不容乐观,制度研究在本体论、方法论、时间维度、空间尺度、研究方法等方面仍然存在不足。通过文献梳理与理论分析,认为经济地理学的制度理论应基于演化经济地理学进行建构,并提出了建构的方向：1）以系统论、层级观为指导,注重构建制度的层级结构;2）以反还原论为基础,寻求方法论的突破;3）借助演化的思想与路径依赖理论,强调时间在制度系统中的作用;4）加强对各空间尺度的制度研究;5）注重工具方法的借鉴与创新。  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

Real‐time force control for servo‐hydraulic actuator systems using adaptive time series compensator and compliance springs     

《地震工程与结构动力学》2018,47(4):854-871

Servo‐hydraulic actuators have been widely used for experimental studies in engineering. They can be controlled in either displacement or force control mode depending on the purpose of a test. It is necessary to control the actuators in real time when the rate‐dependency effect of a test specimen needs to be accounted for under dynamic loads. Real‐time hybrid simulation (RTHS) and effective force testing (EFT) method, which can consider the rate‐dependency effect, have been known as viable alternatives to the shake table testing method. Due to the lack of knowledge in real‐time force control, however, the structures that can be tested with RTHS and EFT are fairly limited. For instance, satisfying the force boundary condition for axially stiff members is a challenging task in RTHS, while EFT has a difficulty to be implemented for nonlinear structures. In order to resolve these issues, this paper introduces new real‐time force control methods utilizing the adaptive time series (ATS) compensator and compliance springs. Unlike existing methods, the proposed force control methods do not require the structural modeling of a test structure, making it easy to be implemented especially for nonlinear structures. The force tracking performance of the proposed methods is evaluated for a small‐scale steel mass block system with a magneto‐rheological damper subjected to various target forces. Accuracy, time delay, and resonance response of these methods are discussed along with their force control performance for an axially stiff member. Overall, a satisfactory force tracking performance was observed by using the proposed force control methods.  相似文献   

Seismic performance of buildings retrofitted with nonlinear viscous dampers and adjacent reaction towers     

《地震工程与结构动力学》2018,47(5):1329-1351

An effective strategy of seismic retrofitting consists of installing nonlinear viscous dampers between the existing building, with insufficient lateral resistance, and some auxiliary towers, specially designed and erected as reaction structures. This allows improving the seismic performance of the existing building without any major alteration to its structural and nonstructural elements, which makes this approach particularly appealing for buildings with heritage value. In this paper, the nonlinear governing equations of the coupled lateral‐torsional seismic motion are derived from first principles for the general case of a multistory building connected at various locations in plan and in elevation to an arbitrary number of multistory towers. This formulation is then used to assess the performance of the proposed retrofitting strategy for a real case study, namely, a 5‐story student hall of residence in the city of Messina, Italy. The results of extensive time‐history analyses highlight the key design considerations associated with the stiffness of the reaction towers and the mechanical parameters of the nonlinear viscous dampers, confirming the validity of this approach.  相似文献