A new method for establishing hydrologic fidelity of snow depth measurements based on snowmelt–runoff hydrographs     

Daeryong Park 《水文科学杂志》2018,63(3):369-385

For snowmelt-driven flood studies, snow water equivalent (SWE) is frequently estimated using snow depth data. Accurate measurements of snow depth are important in providing data for continuous hydrologic simulations of such watersheds. A new hydrologic fidelity metric is proposed in this study to evaluate the potential contribution of particular snow depth datasets to flow characteristics using observed data and hydrologic modeling using the Variable Infiltration Capacity (VIC) model. Data-based hydrologic fidelity of snow depth measurements is defined as a categorical skill score between the snow depth in the watershed and the hydrograph peak or volume at the watershed outlet. Similarly, model-based hydrologic fidelity is defined as a categorical skill score between the model-simulated snow depth and the model-simulated hydrograph peak or volume. The proposed framework is illustrated using the Pecatonica River watershed in the USA, indicating which sites have a higher hydrologic fidelity, which is preferred in hydrologic studies.  相似文献   

A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

利用GPS拖体在万山区域测量平均海面技术研究     

翟万林  朱建华  马超飞  樊小慧  闫龙浩  王贺  陈春涛 《海洋学报(英文版)》2020,42(5):123-132

Wanshan area has been chosen to be the specified field to calibrate and validate(Cal/Val) the HY-2 altimeter and its follow-on satellites. In March 2018, an experiment has been conducted to determine the sea surface height(SSH) under the HY-2 A ground track(Pass No. 203). A GPS towing-body(GPS-TB) was designed to measure the SSH covering an area of about 6 km×28 km wide centered on the HY-2 A altimeter satellite ground track. Three GPS reference stations, one tide gauge and a GPS buoy were placed in the research area, in order to process and resolve the kinematic solution and check the precision of the GPS-TB respectively. All the GPS data were calculated by the GAMIT/GLOBK software and TRACK module. The sea surface was determined by the GPS-TB solution and the tide gauge placed on Zhiwan Island. Then the sea surface of this area was interpolated by Arc GIS10.2 with ordinary Kriging method. The results showed that the precision of the GPS-TB is about 1.10 cm compared with the tide gauge placed nearby, which has an equivalent precision with the GPS buoy. The interpolated sea surface has a bias of –1.5–4.0 cm with standard deviation of 0.2–2.4 cm compared with the checking line. The gradient of the measured sea surface is about 1.62 cm/km along the HY-2 orbit which shows a good agreement compared with the CLS11 mean sea surface(MSS). In the Cal/Val of satellites, the sea surface between the tide gauge/GPS buoy and the footprint of altimeter can be improved by this work.  相似文献   

琼胶/SiO₂复合纤维的制备及性能研究     

吴大伟  颜廷波  李腾飞  王应霞  肖玉斌  薛志欣  夏延致 《海洋科学》2020,44(10):39-45

利用湿法纺丝技术制备了琼胶/SiO₂复合纤维，对琼胶分子在溶液中的分散性、纺丝液流变性、纤维的形貌、化学结构分别用DLS、旋转黏度计、SEM、FTIR和XRD进行了表征，并对纤维的力学性能、热性能和吸湿性能进行了测定。研究结果表明：琼胶分子在溶液中呈纳米尺度分布，纺丝液具有良好的流动性；琼胶/纳米SiO₂复合纤维具有良好的形态。随着纳米SiO₂的添加量逐渐提高，复合纤维的力学拉伸强度先增强后降低，复合纤维的吸水性降低，复合纤维的热稳定性逐渐增强。结合复合纤维综合性能，纳米SiO₂的最佳添加质量分数为0.5%。  相似文献   

A depth average SPH model including μ(I) rheology and crushing for rock avalanches     

Alberto Longo  Manuel Pastor  Lorenzo Sanavia  Diego Manzanal  Miguel Martin Stickle  Chuan Lin  Angel Yague  Saeid Moussavi Tayyebi 《国际地质力学数值与分析法杂志》2019,43(5):833-857

Classical depth-integrated smoothed particle hydrodynamics (SPH) models for avalanches are extended in the present work to include a μ(I)− rheological model enriched with a fragmentation law. With this improvement, the basal friction becomes grain distribution dependent. Rock avalanches, where grain distribution tends to change with time while propagating, are the appropriate type of landslide to apply the new numerical proposal. The μ(I)− rheological models considered in the present work are those of Hatano and Gray, combined with two different fragmentation laws, a hyperbolic and a fractal-based law. As an application, Frank avalanche, which took place in Canada in 1903, is analyzed under the scope of the present approach, focusing in the influence of the rheological and fragmentation laws in the evolution of the avalanche.  相似文献   

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure     

Gui Liu  Yongsheng Zhou  Changrong He  Wenming Yao  Junlai Liu  Yuanyuan Zhang 《Geological Journal》2016,51(1):92-112

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Rheological properties of the upper mantle of Northern Eurasia and nature of regional boundaries according to the data of long-range seismic profiles   总被引：1，自引：0，他引：1  

N.I. Pavlenkova 《Russian Geology and Geophysics》2011,52(9):1016-1027

Deep seismic investigation carried out in Russia in long-range profiles with peaceful nuclear explosions allowed clarifying in details the structure of the upper mantle and the transition zone down to the depth of 700 km within the huge territory of old and young platforms of Northern Eurasia. Variability of horizontal heterogeneity of the upper mantle depending on the depth serves to qualitative estimation of its rheological properties. The upper part of the mantle to the depth of 80–100 km is characterized by the block structure with significant velocity steps of seismic waves at the blocks often divided by deep faults. This is the most rigid part of lithosphere. Below 100 km horizontal heterogeneity is insignificant, i.e., at these depths the substance is more plastic and not capable to retain block structure. On the lithosphere bottom at the depth of 200–250 km plasticity increase is observed as well but the zone of the lower velocities that might have been bound with the area of partial melting (asthenosphere) has not been found. These three layers with different rheological properties are divided by seismic boundaries presented by thin layering zones with alternating higher and lower velocities. At the specified depths any phase boundaries have been distinguished. These thin layering zones are assumed to form due to higher concentration of deep fluids at some levels of depths where mechanical properties and permeability of substance change. Insignificant number of fluids may result in appearance of streaks with partial or film melting at relatively low temperature—to the rise of the weakened zones where subhorizontal shifts are possible. According to seismic data in many world regions seismic boundaries are also observed at the depth of about 100 and 200 km; they may be globally spread. There are signs that areas of xenoliths formation and earthquake concentration, i.e., zones of high deformations, are confined to these depths.  相似文献   

平均海平面模型的确立方法研究     

孙啸  周兴华  孙学华  孙翠羽 《海岸工程》2011,30(2):30-37

针对平均海平面的定义,分别介绍了利用验潮站资料和卫星高度计资料确立平均海平面的方法原理,并对2种方法的特性及存在的问题进行了比较阐述,确定了以沿岸长期验潮站为控制条件,对卫星测高数据确定的高分辨率高精度的平均海平面网格模型进行改正,最终构建平均海平面与国家大地坐标系关系的研究方法.  相似文献   

提高气介式超声波水位计测量精度的探讨   总被引：1，自引：0，他引：1  

黄新建  周五一 《水文》2011,(4):71-75

分析了影响气介式超声波水位计水位测量精度的各种因素,提出了消除这些影响因素的对策措施。其中,对超声波水位计测量回波因距离、反射角和发射面的变化带来的误差进行了分析,提出了一种利用数字采样技术对超声波测量回波前沿进行分析补偿来提高测量精度的方法。采用该技术的气介式超声波水位计在回波信号强弱变化时,数据重复性明显提高,使较短时间的采样就可获得较好测量精度,适合野外功耗要求小而采用间歇工作的方式。  相似文献   

冻土区天然气水合物勘探低温钻井液理论与试验   总被引：3，自引：2，他引：1       下载免费PDF全文

杨葳  杨阳  徐会文 《探矿工程》2011,38(7):29-31,56

天然气水合物是在特定的低温与高压条件下形成的产物。在天然气水合物勘探工作中,低温钻井液是获得天然气水合物真实样品的重要保证条件之一。低温钻井液应具有低的冰点、良好的抵制能力与良好的流动性。结合天然气水合物勘探工作的特点,在试验的基础上,对比分析了PAM、PHPA、PAC-141、Na-CMC与KHm的分子结构、官能团的种类与数量对钻井液的防塌能力和流动性的影响,得出了几种处理剂的耐低温能力大小的顺序为：PAC-141〈PHPA〈PAM〈Na-CMC〈KHm,为天然气水合物勘探中低温钻井液的配制与使用,奠定了重要的基础。  相似文献