考虑冲刷影响的筒型基础竖向极限承载力研究     

陆罗观  刘润  练继建  陈广思 《海洋工程》2019,37(3):69-77

大直径宽浅式筒型基础,阻水宽度大,在位工作期间受波浪海流作用,其周围土体易被冲刷。为研究单侧地基土体受冲刷后筒型基础的竖向极限承载力变化,通过引进冲刷率的概念,采用有限元方法研究了不同冲刷率下筒型基础的竖向极限承载力;并基于Meyerhof理论建立了计算不同冲刷率下筒型基础竖向极限承载力的极限平衡方法。研究结果表明,随着冲刷率增大,筒型基础的极限承载力出现不同程度的下降,当冲刷率为0.8时,即筒型基础单侧土体冲刷深度达6.4 m时,筒型基础的竖向极限承载力折减率为3.28%。建立的极限平衡算法可准确计算冲刷条件下筒型基础的竖向极限承载力。  相似文献   

Comparison of life-history parameters and effectiveness in competition with Moina macrocopa between two Keratella tropica morphs     

《Limnologica》2020

Competition and predation are the two major biotic interactions in zooplankton community. Various rotifer species exhibit polymorphism in lorica and spine morphology in the presence of predators and competitors, which effectively increases their defence competition capacity. This study compared life-history parameters between long-spined morph (LSM) and short-spined morph (SSM) of Keratella tropica at three temperatures. The results showed that both morphs showed significantly higher intrinsic rate of population increase at 25 °C than those at 20 °C and 30 °C. The intrinsic rate of population increase was significantly lower in LSM than SSM at 25 °C and 30 °C, and the net reproductive rate was significantly lower in LSM than SSM at 30 °C. These results suggested that K. tropica had cost on development of long spines, which, however, was dependent on temperature. Moreover, the competition outcome of LSM and SSM with Moina macrocopa were investigated at three densities of Scenedesmus obliquus (0.5 × 10⁶, 1.0 × 10⁶ and 2.0 × 10⁶ cells/mL) and three initial densities of M. macrocopa (0.1, 0.3 and 0.9 ind./mL), revealing that both LSM and SSM populations decreased significantly at all tested algal densities and Moina levels. LSM showed higher population growth rate than SSM at lower algal density (0.5 × 10⁶ cells/mL) and higher Moina densities (0.3 and 0.9 ind./mL), which suggested that LSM could be more effective to defend M. macrocopa. Three-way analysis of variance showed no significant effects of algal density on population growth rate of K. tropica, but interaction between algal density and M. macrocopa density significantly affected its population growth rate.  相似文献   

中国泥炭矿成矿规律与开发利用   总被引：1，自引：0，他引：1  

饶娇萍  贾沁贤  王登红  刘丽君  代鸿章  郭唯明 《地质学报》2020,94(1):192-203

泥炭是具有重要意义的新兴产业矿产，是传统矿产向新兴产业矿产“华丽转身”的典型。全球泥炭资源的总量约为5000亿吨，我国的泥炭资源总量仅为124. 96亿吨，资源量较为丰富，质量中等，但需要量在上升。我国泥炭的分布具有普遍性和不均匀性，成矿时代为第四纪(全新世)，更早的泥炭多已经历成煤的早期阶段而转变为褐煤。我国的泥炭矿床类型主要以富营养草本泥炭为主，木本为辅，藓类泥炭次之。本文在对1988年全国泥炭报告中罗列的5719处泥炭矿产地进行梳理的基础上，总结其成矿规律，根据资源规模厘定出5个大型矿集区，7个中小型矿集区，3个大型预测区，为泥炭勘查工作提供依据。离最近一次全国泥炭资源调查已30年，多处泥炭地由于全球气候变化、城市化发展等原因而消失，非常有必要重新评估。需要强调的是，泥炭的用途已经不再是“燃料”矿产，不再主要用于取暖，而在节能环保、生物等战略性新兴产业中发挥特殊作用，故应该从生态文明建设、碳汇、环境保护、生物技术等角度创新定位其功能和用途。鉴于泥炭的新用途及其利用趋势，《中国矿产地质志》编委会建议将其定位为非金属矿产而非“能源”矿产，据此提出开发利用建议。  相似文献   

Undrained lower bound solutions for end bearing capacity of shallow circular piles in non-homogeneous and anisotropic clays     

Boonchai Ukritchon  Suraparb Keawsawasvong 《国际地质力学数值与分析法杂志》2020,44(5):596-632

The undrained bearing capacity of shallow circular piles in non-homogeneous and anisotropic clay is investigated by the lower bound (LB) finite element limit analysis (FELA) under two-dimensional (2D) axisymmetric condition using second-order cone programming, and the new solution of the problem is presented. Modified from the isotropic von Mises yield criterion, a cross-anisotropic undrained strength criterion of clays under the axisymmetric state of stress requiring three input shear strengths in triaxial compression, direct simple shear, and triaxial extension is employed in the 2D axisymmetric LB FELA. Parametric studies on the effects of pile embedment ratio, dimensionless strength gradient, anisotropic strength ratio, and pile roughness are investigated extensively, while the predicted failure mechanisms associated with these parameters are discussed and compared. Numerical results of undrained end bearing capacity of shallow circular piles are summarized in the form of design tables that are useful for design practice and represent a new contribution to the field of pile capacity considering the combined effects of undrained strength non-homogeneity and anisotropy.  相似文献   

可替换式桥梁横向防落梁限位装置抗震性能研究          下载免费PDF全文

闫磊  安康  岳克锋  李果  尹修城  姜渝  付亚男 《世界地震工程》2020,(3):172-180

针对目前桥梁结构横向防落梁限位装置损毁后修复困难的问题，提出一种新型的带可更换耗能段的桥梁横向防落梁限位装置。分别以可更换耗能段的腹板厚度、腹板高度及安装位置等为参数，采用有限元软件ABAQUS建立了10个不同参数的装置模型并对其开展拟静力仿真试验，探讨其工作机理，验证其可更换的设计思想并剖析其破坏机理，研究各参数对装置滞回曲线、承载力、延性和耗能能力的影响规律。结果表明:该装置可通过先可更换耗能段破坏再竖板破坏达到多道设防和分级耗能的目的，且整个加载过程中装置的滞回曲线饱满、稳定、无明显捏拢，表现出良好的耗能能力；随着可更换耗能段腹板厚度的增加，装置屈服承载力、极限承载力、屈服位移、极限位移以及延性系数逐渐增大，耗能能力逐渐增强；可更换耗能段高度对装置屈服承载力影响不显著；随着可更换耗能段高度的增加，装置极限承载力逐渐增大，装置屈服位移先增大后减小，装置极限位移整体呈下降趋势，装置的延性系数和耗能能力逐渐减小；可更换耗能段的安装高度对装置屈服承载力和耗能能力的影响无统一规律，但与装置的屈服位移、极限位移及延性系数成负相关。基于本析结果，建议装置在满足承载力要求的前提下，应尽量选取可更换耗能段腹板厚度较厚、高度较小和安装位置较低的参数进行设计。  相似文献   

中蒙边界地区汇水域沉积物69种元素的背景值     

刘汉粮  聂兰仕  SHOJIN Davaa  王学求  迟清华 《地学前缘》2020,27(3):202-221

中蒙边界地区成矿地质条件优越,是世界上重要的金属成矿省和全球3大斑岩型铜(金、钼)成矿带之一,资源潜力巨大。中蒙合作1∶100万地球化学填图采集了海量的地球化学数据,为研究该地区元素分散富集、成矿趋势、资源评价和环境变化提供基础数据,为“一带一路”资源布局提供决策依据。以X±3S为临界值一次性剔除离群值后的数据集的中位值作为背景值的估计值,计算了中蒙边界地区12个Ⅱ级构造单元和5个Ⅱ级成矿省的汇水域沉积物69种元素背景值,探讨了中蒙边界地区汇水域沉积物69种元素背景值的区域分布规律和特征。研究表明不同的地质背景导致元素的地球化学分布模式不同,不同构造单元具有显著差异的元素地球化学特征,元素的海量聚集为大型矿床的形成提供了充足的元素供给,形成特定的地球化学省。这些背景值为进一步深入开发利用中蒙边界地球化学填图数据提供了可供对比的基础数据。  相似文献   

Analysis of resistance factors for LRFD of soil nail pullout limit state using default FHWA load and resistance models     

Hui Hu 《Marine Georesources & Geotechnology》2020,38(3):332-348

Abstract

Resistance factors for load and resistance factor design (LRFD) of pullout limit state of both permanent and temporary soil nails are calibrated against a wide design space using the current Federal Highway Administration (FHWA) nail load and resistance models. The calculated resistance factors were shown to scatter broadly among design scenarios that differ in wall face batter, soil friction angle, nail ultimate bond strength, and surcharge live load. An important lesson learned from the analysis results is that the current practice of using a single resistance factor for LRFD of nail pullout limit state could not result in uniform reliabilities across different design scenarios. Simple artificial neural network (ANN) models were developed for computation of resistance factors. Design examples demonstrated the ability of the ANN models in providing resistance factors that yield satisfactory and consistent reliabilities in different nail pullout designs.  相似文献   

On the morphology of radial sand ridges     

Weina Zhang  Xiaohe Zhang  Huiming Huang  Yigang Wang  Sergio Fagherazzi 《地球表面变化过程与地形》2020,45(11):2613-2630

We use a hydrodynamic model applied to an idealized fan-shaped basin to explore the morphology and dynamics of radial sand ridges in a convergent coastal system. A positive morphological feedback between channel incision and flow redistribution is responsible for the formation of the channel-ridge pattern. The selection mechanism of bottom wavelength is associated with flow concentration in the deeper part of the channels. Our results are compared to sediment and hydraulic dynamics in the radial sand ridges (RSRs) in China. In a convergent, sloping basin the tangentially averaged tidal velocity peaks at 47 km from the apex. This distance is similar to the arc distance, 62 km, where the RSRs are most incised. An offshore shift in tidal phase results in stronger flows near the north coastline, explaining the presence of asymmetric channel patterns. A numerical stability analysis indicates that small radial oscillations with a wavelength of 10° to 15° maximize the velocity in the troughs. This oscillation wavelength also emerges in the RSRs, which display a peak in spectral energy at a radial wavelength between 25° to 37.5°. High-resolution numerical simulations in the RSRs confirm that flow concentration occurs in the deeper part of the channels, keeping them flushed. We therefore conclude that the RSRs display morphometric characteristics similar to other tidal incisions, like tidal inlets and intertidal channels. This result further supports the dominant role of tidal prism and related peak velocities in incising coastal landscapes. © 2020 John Wiley & Sons, Ltd.  相似文献   

车辆碾压作用下戈壁地表起尘浓度   总被引：1，自引：1，他引：0  

孟小楠  严平  王振亭  董苗  王勇 《中国沙漠》2019,39(1):80-87

通过野外观测车辆碾压作用下戈壁地表PM₁₀释放浓度，探讨其主要影响因素。针对戈壁区砾石、砂砾、砂质和砂土4种路面类型，应用TSI粉尘仪多次重复观测车辆碾压产生的PM₁₀浓度，进而阐明碾压次数、车速和地表水分等因素对起尘浓度的影响。结果表明：4种路面的平均起尘浓度依次为5.339、9.089、16.944、50.251 mg·m^-3，是自然状态下的5~50倍；起尘浓度随碾压次数增多而增大，其中砂土路情况下的增长最显著；随土层厚度的增大呈现出幂函数的增长趋势；降雨后路面起尘浓度显著减小，且降雨量会影响降雨后起尘浓度的变化趋势。最后提出了针对性的建议和措施以减弱车辆碾压导致的戈壁地表起尘。  相似文献   

KK型管节点应力集中系数几何敏感性分析     

林海花  孙承猛  石强 《海洋工程》2020,38(6):142-150

KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。  相似文献