柴达木盆地碱山深钻的硼同位素地球化学特征          下载免费PDF全文

卢胜城  韩文霞  韩凤清  马云麒  吕爽 《盐湖研究》2020,28(1):60-68

沉积物硼(B)同位素组成可以反映其地质成因及经历的地质过程,因此在许多领域的研究中都有较为广泛的应用。通过对位于柴达木盆地碱山背斜顶部的SG-1b钻孔沉积物(7.3～1.6 Ma)水溶组分的B同位素研究,发现钻孔沉积物B含量在38.55～172.3μg/g之间,平均含量为87.6μg/g;δ~(11)B值的变化范围在3.61‰～16.26‰之间,平均值为10.65‰,B含量与δ~(11)B值具有一定的正相关关系。进一步分析表明,受到碱山背斜构造隆升以及晚新生代以来气候干旱化的影响,柴西古湖逐渐咸化萎缩,沉积环境以及碳酸盐含量、粘土矿物含量及其矿物组合等也在发生变化,B含量和δ~(11)B值自钻孔底部向上的逐步增加以及后期的急剧增加,与水溶离子含量以及矿物和粒度等的变化一致,这说明柴达木盆地晚中新世以来湖泊沉积物的B含量和δ~(11)B值可以很好地反映研究区气候和湖水的演化过程,共同指示了研究区自7.3 Ma以来气候的持续干旱化和湖水盐度的逐步增加,以及3.3Ma以来干旱化和湖水浓缩过程的加剧。  相似文献   

Kainsaz(CO3)陨石中两个富Al球粒的氧同位素组成特征与形成演化     

戴德求  包海梅  刘爽  尹锋 《岩石学报》2020,36(6):1850-1856

富Al球粒是原始球粒陨石中一种矿物岩石学特征介于富钙铝包体(CAIs)和镁铁质硅酸盐球粒之间的特殊集合体,所以常常认为富Al球粒在认识CAIs和镁铁质硅酸盐球粒形成演化过程中的相互联系具有特殊意义。然而,对富Al球粒的初始物质组成以及形成演化过程一直存在较多争议,而氧同位素组成研究能够对球粒演化和早期星云环境等提供重要的信息。在本文中我们报导了来自Kainsaz(1937年降落于俄罗斯,CO3型)碳质球粒陨石中的2个富Al球粒(编号K1-CH1和K2-CH2)的矿物岩石学和氧同位素组成特征。K1-CH1的矿物组成主要为橄榄石、低钙辉石和富钙长石,K2-CH2为橄榄石和富钙长石。2个球粒中的矿物均具有贫~(16)O同位素组成特征。K1-CH1中矿物的△~(17)O组成基本上位于2个区间:-11.1‰～-8.7‰和-3.9‰～0.4‰;而K2-CH2的△~(17)O介于-6.6‰～-0.6‰之间,且具有从中部至边部升高的趋势。矿物岩石学和氧同位素特征表明,这2个富Al球粒的初始物质组成为富CAIs和镁铁质硅酸盐。在球粒熔融结晶过程中,与贫~(16)O同位素组成(△~(17)O:-8.7‰～-7.8‰)的星云发生了氧同位素交换。球粒形成后,发生迁移进入陨石母体,在相对更贫~(16)O同位素组成(△~(17)O:-0.6‰～0.4‰)的母体中(流体参与)发生变质作用,并再次发生了氧同位素交换。  相似文献   

针铁矿对湖泊草、藻来源可溶有机质的非均质吸附     

章奇  居琪  李健欣  曹驰程  江和龙  张晖 《湖泊科学》2020,32(4):1041-1049

为探究富营养化湖泊中自生源可溶有机质(DOM)在泥水界面的吸附行为,以马来眼子菜(Potamogeton malaianus)和铜绿微囊藻(Microcystis aeruginosa)释放的DOM为代表,考察针铁矿对草、藻源DOM中不同组分的吸附特征.三维荧光平行因子分析表明类富里酸组分C1和类胡敏酸组分C4的含量很低,而类蛋白物质(类酪氨酸组分C2和类色氨酸组分C3)分别占草、藻源DOM荧光组成的70%和93%. 2种DOM均可被针铁矿吸附,吸附过程符合伪一级动力学.通过等温线拟合发现针铁矿吸附藻源DOM的非线性更强,饱和吸附量(23.77 mg/g)高于草源DOM(19.10 mg/g).特别地,类蛋白组分呈现非线性吸附,而类腐殖物质的吸附近似线性,且针铁矿对于DOM各荧光组分的吸附量顺序为:C3C2 C4 C1,此非均质吸附特征与DOM组分的初始含量、分子大小、芳香性及有效吸附位点有关.红外光谱证实氨基、羧基和羟基是吸附过程中的重要官能团.因此,草、藻源DOM显著改变了针铁矿表面的有机物质组成,影响湖泊沉积物的生物地球化学行为.  相似文献   

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials     

Weihan Li  Jian‐Ming Zhu  Decan Tan  Guilin Han  Zhouqiao Zhao  Guangliang Wu 《Geostandards and Geoanalytical Research》2020,44(3):523-535

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.  相似文献   

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS     

Jean‐Michel Brazier  Anne‐Dsire Schmitt  Eric Pelt  Damien Lemarchand  Sophie Gangloff  Tho Tacail  Vincent Balter 《Geostandards and Geoanalytical Research》2020,44(2):331-348

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.  相似文献   

Barium Isotopic Compositions in Thirty‐Four Geological Reference Materials Analysed by MC‐ICP‐MS     

Ya‐Jun An  Xin Li  Zhao‐Feng Zhang 《Geostandards and Geoanalytical Research》2020,44(1):183-199

Measurement of Ba isotope ratios of widely available reference materials is required for interlaboratory comparison of data. Here, we present new Ba isotope data for thirty‐four geological reference materials, including silicates, carbonates, river/marine sediments and soils. These reference materials (RMs) cover a wide range of compositions, with Ba mass fractions ranging from 6.4 to 1900 µg g^?1, SiO₂ from 0.62% to 90.36% m/m and MgO from 0.08% to 41.03% m/m. Accuracy and precision of our data were assessed by the analyses of duplicate samples and USGS rock RMs. Barium isotopic compositions for all RMs were in agreement with each other within uncertainty. The variation of δ^138/134Ba in these RMs was up to 0.7‰. The shale reference sample, affected by a high degree of chemical weathering, had the highest δ^138/134Ba (0.37 ± 0.03‰), while the stream sediment obtained from a tributary draining carbonate rocks was characterised by the lowest δ^138/134Ba (?0.30 ± 0.05‰). Geochemical RMs play a fundamental role in the high‐precision and accurate determination of Ba isotopic compositions for natural samples with similar matrices. Analyses of these RMs could provide universal comparability for Ba isotope data and enable assessment of accuracy for interlaboratory data.  相似文献   

Seismic responses of postyield hardening single–degree-of-freedom systems incorporating high-strength elastic material     

Hanlin Qiang  Peng Feng  Zhe Qu 《地震工程与结构动力学》2019,48(6):611-633

It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μ_p-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.  相似文献   

有机化学物质碳氮稳定同位素系列标准物质研制     

李科  张琳  刘福亮  贾艳琨 《岩矿测试》2020,39(5):753-761

实验室和研究人员所使用的碳、氮同位素标准物质一般由国际原子能机构(IAEA)获得,然而近年来,随着碳氮同位素在实验室质量监控、方法评价、仪器校准等方面的广泛应用,市场需求量不断增加, IAEA研制的碳、氮同位素标准物质的种类与数量逐渐不能满足科学研究快速发展的需求。我国急需研制适应当今分析技术水平的有机质碳氮同位素国家标准物质用以进行质量监控、方法评价、仪器校准。为保证量值传递精度,本文研制了4个有机化学物质的碳氮稳定同位素标准物质,其中3个为尿素样品,1个为L-谷氨酸。经检验4种标准物质的均匀性通过F值检验,标准物质的δ~(13)C和δ~(15)N值经过一年的稳定性检验,特征量值变化在测量方法允许的不确定度范围内,由此判定δ~(13)C和δ~(15)N值稳定性良好。由包括研制单位实验室在内的12家实验室协同定值,采用高温燃烧-气体同位素质谱法测定了δ~(13)C和δ~(15)N值,系列标准物质δ~(13)C和δ~(15)N认定值区间呈梯度分布,δ~(13)C值为-40‰～0‰,δ~(15)N值为-10‰～30‰,涵盖了我国天然样品中有机质碳氮稳定同位素组成范围;研制的系列标准物质δ~(13)C的定值扩展不确定度不大于0.08‰,δ~(15)N的定值扩展不确定度不大于0.09‰,定值水平与国际标准物质相当。该系列标准物质已被国家质检总局批准为国家一级标准物质,批准号为GBW04494～GBW04497。可被用于地质、生态、环境等多种样品δ~(13)C和δ~(15)N比值测定时的分析监控、仪器校准、方法评价、质量保证和质量监控。  相似文献   

低压密闭消解-电感耦合等离子体发射光谱法测定地质样品中的硼     

杜宝华  盛迪波  罗志翔  王全 《岩矿测试》2020,39(5):690-698

采用酸溶-电感耦合等离子体发射光谱法(ICP-OES)测定地质样品中的全硼量,关键环节在于如何防止样品消解过程中硼元素的损失,降低测量过程中的基体干扰、光谱干扰和记忆效应。基于以上问题,本文采用氢氟酸-硝酸-高氯酸-磷酸在低压密闭溶样罐中消解样品,溶出的硼元素与少量磷酸充分络合,防止硼的挥发损失;以基体及主成分浓度与样品相类似的地质类固体标准物质绘制标准曲线做线性校准,有效匹配和降低样品的基体干扰;采用仪器自带的操作软件,观察分析谱线附近是否存在其他元素的干扰,来确定背景扣除最佳的位置及宽度,降低ICP-OES测量中的光谱干扰;以10%的王水作为进样系统的冲洗液,有效消减测量过程中的记忆效应。当稀释因子为200时,方法的检出限(3SD)为1.2μg/g,定量限(10SD)为4.0μg/g;用岩石、土壤及水系沉积物国家一级标准物质对精密度及准确度进行分析验证,11次测定相对标准偏差为1.8%～7.9%,相对误差为-3.6%～6.3%;以外检分析结果为参考,对硼含量在定量限以上的样品测定,相对误差为-9.3%～12.5%。  相似文献   

晋北煅烧高岭土用煤矸石的应用矿物学特征   总被引：1，自引：0，他引：1  

侯龙超  王哲皓  汪灵  周东晓 《矿物学报》2020,(2):149-154

为了给晋北煅烧高岭土用煤矸石的评价和开发利用提供科学依据,采用XRD、XRF、SEM和白度计等现代分析测试技术,研究了晋北煅烧高岭土用煤矸石的应用矿物学特征。结果表明:1)根据造纸和涂料用煅烧高岭土的国家标准,晋北煤矸石主要可分为3种类型:合格原料、基本合格原料和不合格原料。2)与合格和基本合格原料相比,不合格原料煅烧产物的化学成分中SiO2、Al2O3、Fe2O3含量以及碱金属与碱土金属总含量都与前者有较大差异。3)合格和基本合格原料主要由高岭石(85%~94%)组成,不合格煤矸石矿物组合为高岭石(30%~60%)+石英(23%~38%)+伊利石(14%~26%),并含少量黄铁矿和白云石等杂质矿物,石英等杂质矿物和含铁矿物是分别导致煅烧产物化学成分和白度不合格的主要原因。4)合格原料中高岭石结晶度较好,主要为不规则片状、书册状和弯曲片状,片表面光滑,片径大小范围较大,为0.05~51.22μm,平均2.80μm,径厚比41.24。  相似文献