Vertical mixing in the bottom mixed layer near the continental shelf break in the East China Sea     

Takeshi Matsuno  Seiichi Kanari  Chikashi Kobayashi  Toshiyuki Hibiya 《Journal of Oceanography》1994,50(4):437-448

The strength of the vertical mixing in the bottom mixed layer near the continental shelf break in the East China Sea was directly measured with the Micro-Scale Profiler (MSP). It has been shown that there is no significant statistical relation between the turbulent energy dissipation and the degree of the stratificationN ². It seems that the vigorous turbulence occurs not constantly but intermittently in the bottom mixed layer so that a large variation of is found depending on the time. In contrast to , the coefficient of the vertical eddy diffusivityK _z is mostly determined byN such thatK _z is large in the bottom mixed layer and small in the thermocline. Large value ofK _z in the bottom mixed layer is also found in the time series ofK _z estimated in terms of Richardson number calculated from the data obtained with electromagnetic current meters. The value ofK _z more than 10 cm²s^–1 frequently occur in the layer of 20–25 m thick just above the bottom.  相似文献   

U-Pb Age Determination for Seven Standard Zircons using Inductively Coupled Plasma–Mass Spectrometry Coupled with Frequency Quintupled Nd-YAG (λ = 213 nm) Laser Ablation System: Comparison with LA-ICP-MS Zircon Analyses with a NIST Glass Reference Material     

Yuji Orihashi    Shun'ichi Nakai  Takafumi Hirata 《Resource Geology》2008,58(2):101-123

This paper evaluates the analytical precision, accuracy and long‐term reliability of the U‐Pb age data obtained using inductively coupled plasma–mass spectrometry (ICP‐MS) with a frequency quintupled Nd‐YAG (λ = 213nm) laser ablation system. The U‐Pb age data for seven standard zircons of various ages, from 28 Ma to 2400 Ma (FCT, SL13, 91500, AS3, FC1, QGNG and PMA7) were obtained with an ablation pit size of 30 μm diameter. For ²⁰⁷Pb/²⁰⁶Pb ratio measurement, the mean isotopic ratio obtained on National Institute of Standards and Technology (NIST) SRM610 over 4 months was 0.9105 ± 0.0014 (n = 280, 95% confidence), which agrees well with the published value of 0.9096. The time‐profile of Pb/U ratios during single spot ablation showed no significant difference in shape from NIST SRM610 and 91500 zircon standards. These results encouraged the use of the glass standard as a calibration standard for the Pb/U ratio determination for zircons with shorter wavelength (λ = 213 nm) laser ablation. But ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages obtained by this method for seven zircon standards are systematically younger than the published U‐Pb ages obtained by both isotope dilution–thermal ionization mass spectrometry (ID‐TIMS) and sensitive high‐resolution ion‐microprobe (SHRIMP). Greater discrepancies (3–4% younger ages) were found for the ²⁰⁶Pb/²³⁸U ages for SL13, AS3 and 91500 zircons. The origin of the differences could be heterogeneity in Pb/U ratio on SRM610 between the different disks, but a matrix effect accuracy either in the ICP ion source or in the ablation‐transport processes of the sample aerosols cannot be neglected. When the ²⁰⁶Pb/²³⁸U (= 0.2302) newly defined in the present study is used, the measured ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages for the seven zircon standards are in good agreement with those from ID‐TIMS and SHRIMP within ±2%. This suggests that SRM610 glass standard is suitable for ICP‐MS with laser ablation sampling (LA‐ICP‐MS) zircon analysis, but it is necessary to determine the correction factor for ²⁰⁶Pb/²³⁸U by measuring several zircon standards in individual laboratories.  相似文献   

Hybrid vibration experiments with a bridge foundation system model   总被引：3，自引：0，他引：3  

Hiroshi Kobayashi  Keiichi Tamura  Shunsuke Tanimoto 《Soil Dynamics and Earthquake Engineering》2002,22(9-12):1135-1141

In order to improve seismic design technology of bridges, it is necessary to evaluate the vibration characteristics of a bridge–soil system that consists of soil, foundation structure, pier and superstructure. However, there have been few experimental studies on seismic behavior of bridge–soil system. In this paper, we conducted the hybrid vibration experiment on seismic behavior of bridge–soil system, and examined the applicability of hybrid vibration experiment to study seismic response of bridge–soil system. Based on the experiment results, seismic response of bridge was quantitatively studied.  相似文献   

Interactive behavior of soil–pile-superstructure system in transient state to liquefaction by means of large shake table tests     

Shintaro Yao  Koichi Kobayashi  Nozomu Yoshida  Hiroshi Matsuo 《Soil Dynamics and Earthquake Engineering》2004,24(5):572-409

Shaking table tests were conducted by means of a large-scale laminar box with 4 m in length, 2 m in width and 2 m in height in order to investigate behavior of a soil-pile-superstructure system in liquefiable ground. A model two-storey structure, supported by a pile group, was set in a saturated sand deposit, and subjected to a sinusoidal base motion with increasing amplitude. Discussions are focused on the transient behavior until soil liquefaction occurs. Main interests are characteristics of springs used in a sway-rocking model and a multi-freedom lumped mass (MFLM) model that are frequently used in soil–pile interaction analysis. The spring constant in the sway-rocking model is represented by restoring force characteristics at the pile head, and that in the MFLM system is represented by an interaction spring connecting the pile to the free field. The transient state prior to soil liquefaction is shown to be important in the design of a pile because dynamic earth pressure shows peak response in this state. The reduction of the stiffness due to excess porewater generation and strain dependent nonlinear behavior is evaluated.  相似文献   

Origin of the Palau and Yap trench-arc systems     

Kazuo Kobayashi 《Geophysical Journal International》2004,157(3):1303-1315

  相似文献   

Small inflation sources producing seismic and infrasonic pulses during the 2000 eruptions of Miyake-jima, Japan     

Tomokazu Kobayashi  Yoshiaki Ida 《Earth and Planetary Science Letters》2005,240(2):291-301

During the 2000 activity of Miyake-jima volcano, Japan, we detected long period seismic signals with initial pulse widths of 1-2 s, accompanied by infrasonic pulses with almost the same pulse widths. The seismic signals were observed from 13 July 2000, a day before the second summit eruption. The occurrences of the seismic signals were intermittent with a gradual increase in their magnitudes and numbers building toward a significant explosive eruption on 18 August. After the eruption, the seismic and infrasonic events ceased. The results of a waveform inversion show that the initial motions were excited by an isotropic inflation source beneath the south edge of the caldera at a depth of 1.4 km. On the other hand, the sources of the infrasonic pulses were located in the summit caldera area. The times at which the infrasonic pulses were emitted at the surface were delayed by about 3 s from the origin times of the seismic events. It is suggested that small isotropic inflations excited seismic waves in the crust and simultaneously caused acoustic waves that traveled in the conduit and produced infrasonic pulses at the crater bottom. Considering the observed time differences and gas temperatures emitted from the vent, the conduit should have been filled with vapor mixed with SO₂ gas and volcanic ash. The change of the time differences between the seismic and infrasonic signals suggests that the seismic source became shallower within half a day before the August 18 explosive eruption. We interpret the source process as a fragmentation process of magma in which gas bubbles burst and quickly released part of the pressure that had been sustained by the tensional strength of magma.  相似文献   

Diamond in metasedimentary crustal rocks from Pohorje,Eastern Alps: a window to deep continental subduction          下载免费PDF全文

M. Janák  N. Froitzheim  K. Yoshida  V. Sasinková  M. Nosko  T. Kobayashi  T. Hirajima  M. Vrabec 《Journal of Metamorphic Geology》2015,33(5):495-512

We report the first finding of diamond and moissanite in metasedimentary crustal rocks of Pohorje Mountains (Slovenia) in the Austroalpine ultrahigh‐pressure (UHP) metamorphic terrane of the Eastern Alps. Microscopic observations and Raman spectroscopy show that diamond occurs in situ as inclusions in garnet, being heterogeneously distributed. Under the optical microscope, diamond‐bearing inclusions are of cuboidal to rounded shape and of pinkish, yellow to brownish colour. The Raman spectra of the investigated diamond show a sharp, first order peak of sp³‐bonded carbon, in most cases centred between 1332 and 1330 cm^?1, with a full width at half maximum between 3 and 5 cm^?1. Several spectra show Raman bands typical for disordered graphitic (sp²‐bonded) carbon. Detailed observations show that diamond occurs either as a monomineralic, single‐crystal inclusion or it is associated with SiC (moissanite), CO₂ and CH₄ in polyphase inclusions_. This rare record of diamond occurring with moissanite as fluid‐inclusion daughter minerals implies the crystallization of diamond and moissanite from a supercritical fluid at reducing conditions. Thermodynamic modelling suggests that diamond‐bearing gneisses attained P–T conditions of ≥3.5 GPa and 800–850 °C, similar to eclogites and garnet peridotites. We argue that diamond formed when carbonaceous sediment underwent UHP metamorphism at mantle depth exceeding 100 km during continental subduction in the Late Cretaceous (c. 95–92 Ma). The finding of diamond confirms UHP metamorphism in the Pohorje Mountains, the most deeply subducted part of Austroalpine units.  相似文献   

Fine‐structures of planar deformation features in shocked olivine: A comparison between Martian meteorites and experimentally shocked basalts as an indicator for shock pressure     

Atsushi Takenouchi  Takashi Mikouchi  Takamichi Kobayashi  Toshimori Sekine  Akira Yamaguchi  Haruka Ono 《Meteoritics & planetary science》2019,54(9):1990-2005

We performed shock recovery experiments on an olivine‐phyric basalt at shock pressures of 22.2–48.5 GPa to compare with shock features in Martian meteorites (RBT 04261 and NWA 1950). Highly shocked olivine in the recovered basalt at 39.5 and 48.5 GPa shows shock‐induced planar deformation features (PDFs) composed of abundant streaks of defects. Similar PDFs were observed in olivine in RBT 04261 and NWA 1950 while those in NWA 1950 were composed of amorphous lamellae. Based on the present results and previous studies, the width and the abundance of lamellar fine‐structures increased with raising shock pressure. Therefore, these features could be used as shock pressure indicators while the estimated pressures may be lower limits due to no information of temperature dependence. For Martian meteorites that experienced heavy shocks, the minimum peak shock pressures of RBT 04261 and NWA 1950 are estimated to be 39.5–48.5 GPa and 48.5–56 GPa, respectively, which are found consistent with those estimated by postshock temperatures expected by the presence of brown olivine. We also investigated shock‐recovered basalts preheated at 750 and 800 °C in order to check the temperature effects on shock features. The results indicate a reduction in vitrifying pressure of plagioclase and a pressure increase for PDFs formation in olivine. Further temperature‐controlled shock recovery experiments will provide us better constraints to understand and to characterize various features found in natural shock events.  相似文献   

Wide-Field Camera for Gravitational Microlensing Survey: MOA-cam2     

Toshifumi Yanagisawa  Yasushi Muraki  Yutaka Matsubara  Fumio Abe  Kimiaki Masuda  Sachiyo Noda  Takahiro Sumi  Yuji Kato  Mitsuaki Fujimoto  Shuji Sato  Ian Bond  Nicholas Rattenbury  Philip Yock  Pam Kilmartin  John Hearnshaw  Micheal Reid  Denis Sullivan  Brian Carter  Richard Dodd  Garry Nankivell  Noiman Rumsey  Morihiro Honda  Maki Sekiguchi  Masanori Yoshizawa  Takashi Nakamura  Humitaka Sato  Seiji Kabe  Makoto Kobayashi  Yoshiyuki Watase  Jun Jugaku  Toshiharu Saito  Barbel Koribalsky 《Experimental Astronomy》2000,10(4):519-535

We have constructed a large, mosaic CCD camera called MOA-cam2 which has 4096 × 6144-pixelsto search for gravitational microlensing events. MOA-cam2 has three4096 × 2048-pixel SITe CCD chips, which have a very high quantum efficiency (nearly 80% in the wave region 500 to 800 nm),and three buttable sides. We have placed the threechips side by side with 100 m dead space. MOA-cam2 has been installed on the 61 cm Boller and Chivens telescope of the MOA collaboration at the Mt. John University Observatory (MJUO) in NewZealand since July 1998. The field coverage is 0.92° × 1.38° per exposure. The technical details of MOA-cam2 and the first images obtained with the Boller and Chivens telescope are presented. MOA-cam2 introduces a second phase of research on gravitational microlensing by the MOA collaboration.  相似文献   

Tectonic implications of damage zone-related fault-fracture networks revealed in drill core through the Nojima fault, Japan   总被引：1，自引：0，他引：1  

Aiming Lin  Tadashi Maruyama  Kenta Kobayashi 《Tectonophysics》2007,443(3-4):161

1800 m of drill core through the Nojima fault zone, Japan, reveals subsidiary fault and fracture networks that developed in the fault zone that triggered the 1995 Ms 7.2 Kobe earthquake. The subsidiary fault zones contain a fault gouge of < 1 cm bounded by thin zones of foliated cataclasite or breccia. Fractures are filled with calcite veins, calcite-cemented breccias, clay, and iron-oxide and carbonate alternation of the granitic host rock. These features are typical of extensional fractures that form the conduit network for fluid flux close to a major fault zone. The zone of distributed deformation surrounding the main fault is 50 m in width, and the dip of the Nojima fault at > 1 km depth is 75°. The fault-fracture networks associated with the Nojima fault zone are coseismic and were filled with carbonate and fine-grained material during repeated seismic-related infiltration of the fault zone by carbonate-bearing subsurface water. This study shows that fault-related fracture networks plays an important role as fluid flow conduits within seismically active faults, and can change in character from zones of high permeability to low permeability due to cementation and/or pore collapse.  相似文献