Fracture energy release and size effect in borehole breakout     

Zdenk P. Baant  Feng-Bao Lin  Horst Lippmann 《国际地质力学数值与分析法杂志》1993,17(1):1-14

The paper presents a simple approximate analytical solution of the remote stresses that cause the collapse of a borehole or other circular cylindrical cavity in an infinite elastic space. Regions of parallel equidistant splitting cracks are assumed to form on the sides of the cavity. Their boundary is assumed to be an ellipse of a growing horizontal axis, the other axis remaining equal to the borehole diameter. The slabs of rock between the splitting cracks are assumed to buckle as slender columns, and their post-critical stress is considered as the residual stress in the cracked rock. The buckling of these slab columns is assumed to be resisted not only by their elastic bending stiffness but also shear stresses produced on rough crack faces by relative shear displacements. The energy release from the infinite medium caused by the growth of the elliptical cracking region is evaluated according to Eschelby's theorem. This release is set equal to the energy dissipated by the formation of all the splitting cracks, which is calculated under the assumption of constant fracture energy. This yields the collapse stress as a function of the elastic moduli, fracture energy, ratio of the remote principal stresses, crack shear resistance characteristic and borehole diameter. The collapse stress as a function of crack spacing is found to have a minimum, and the correct crack spacing is determined from this minimum. For small enough diameters, the crack spacing increases as the (4/5)-power of the borehole diameter, while for large enough diameters a constant spacing is approached. In contrast to plastic solutions, the breakout stress exhibits a size effect, such that for small enough diameters the breakout stress decreases as the (? 2/5)-power of the borehole diameter, while for large enough diameters a constant limiting value is approached. Finally, some numerical estimates are given and the validity of various simplifying assumptions made is discussed.  相似文献   

Coronal Holes and Icosahedral Symmetry     

Wolfram Neutsch  Herbert Kalisch  Horst Fichtner  S. Ranga Sreenivasan  Maurice Shevalier 《Astrophysics and Space Science》2003,288(3):391-408

The study of the expansion of the solar wind out of a system of coronal holes is continued. To this end, we consider the numerical integration of partial differential equations for problems with icosahedral symmetry, in general. First, employing Weyl theory, orbifold coordinates are introduced. Second, the icosahedral coordinates are discussed in detail. Third, following an analysis of the properties of these coordinates and the derivation of a few expressions useful for grid construction, various alternatives for the distribution of lattice points required for numerical integration are considered. A comparison of these numerical grids motivates the choice of a specific grid optimized for the numerical integration carried out in the accompanying paper by Kalish et al.(2002). This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Advances in Vent, Seep, Whale- and Wood-Fall Biology     

Lisa A. Levin  James P. Barry  Horst Felbeck  Craig R. Smith  & Craig M. Young 《Marine Ecology》2007,28(1):1-2

  相似文献   

Spatial and temporal distribution patterns of deep‐sea mesozooplankton in the eastern Mediterranean – indications of a climatically induced shift?     

Rolf Koppelmann  & Horst Weikert 《Marine Ecology》2007,28(2):259-275

Zooplankton samples from the eastern Mediterranean were collected in April/May 1999 with a multiple opening and closing net (mesh size 333 μm) to examine the distribution and taxonomic composition of mesozooplankton, mainly Calanoida (Copepoda), some years after the onset of the Eastern Mediterranean Transient (EMT), a climatically induced shift in hydrography. The samples from seven stations on a transect from the Ionian Sea to the eastern part of the Levantine Basin were collected at closely spaced vertical intervals from the surface to water depths of 4250 m. Data from January 1987, June 1993, January 1998 and October 2001 from the main site of investigation, south of Crete, were used to describe the temporal evolution before (1987), during (1993) and after (1998–2001) the EMT. The eastern Mediterranean mesozooplankton fauna is dominated by three Calanoida species along the west–east transect, with varying abundances in different depth‐zones: Haloptilus longicornis in the epipelagic zone, Eucalanus monachus in the mesopelagic zone, and Lucicutia longiserrata in the bathypelagic zone. A drastic change in mesozooplankton composition and abundance occurred at the main site during the EMT, whereupon increased abundances of Candacia elongata and L. longiserrata were observed in the bathypelagic zone in the following years; L. longiserrata accounted for 43% of the total mesozooplankton in this zone. The hypothesis is posed that the Mediterranean deep‐sea ecosystem is able to respond quickly to changes in the environment and memorizes these changes over time. We claim that the biological effects of climatically induced changes can be easily monitored in the deep eastern Mediterranean Sea using calanoid copepod key species due to the hydrographically extreme, but ‘simply structured’ ecosystem.  相似文献   

Biokarst on Limestone Coasts, Morphogenesis and Sediment Production   总被引：3，自引：0，他引：3  

Jürgen  Schneider Horst  Torunski 《Marine Ecology》1983,4(1):45-63

Abstract. Biokarst-forms on limestone coasts are developed and arranged according to the bionomic zonation. The development of biokarst is the result of bioerosion, a synergistic effect of biological corrosion by endoliths and biological abrasion by grazers.
The cumulative effect of biogenic carbonate destruction leads to coastal destruction with a resulting highly profiled morphology on the limestone surfaces along the coastal profile. Under the influence of environmental factors a zonation of organisms develops which brings in turn a zonation of erosion rates (0.1-1.1 mm a^-1) resulting in biokarst-forms such as rock holes, rock pools and notches.
Products of bioerosion on limestone coasts are dissolved carbonate (by biological corrosion, 10–30% of the decomposed limestone) and particulate carbonate (by biological abrasion, 70–90% of the decomposed limestone) both of which contribute directly or indirectly to nearshore sedimentation. Size and shape of the bioerosional grains are determined by the boring pattern of the endoliths. The fine-grained sediments (maximum within the fraction 20–63 μm) contribute 3–25 % to the nearshore sediments.
Drastic changes in the biological zonation (like the mass invasion of the sea urchin Paracentrotus lividus in the Northern Adriatic since 1972 which eliminated nearly the entire macrophyte zone) due to unknown factors or pollution can have a profound effect on the bioerosion rates, altering them by as much as a factor of ten.  相似文献   

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment     

Thomas Backhaus  Rolf Altenburger  sa Arrhenius  Hans Blanck  Michael Faust  Antonio Finizio  Paola Gramatica  Matthias Grote  Marion Junghans  Wiebke Meyer  Manuela Pavan  Tobias Porsbring  Martin Scholze  Roberto Todeschini  Marco Vighi  Helge Walter  L. Horst Grimme 《Continental Shelf Research》2003,23(17-19):1757

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.  相似文献   

Geomechanical model for the post-Variscan evolution of the Permocarboniferous–Mesozoic basins in Northeast Germany     

Christian A. Hecht  Christof Lempp  Magdalena Scheck 《Tectonophysics》2003,373(1-4):125

The Permocarboniferous basins in Northeast Germany formed on the heterogeneous and eroded parts of the Variscan orogene and its deformed northern foreland. Transtensional tectonic movements and thermal re-equilibration lead to medium-scale crustal fragmentation, fast subsidence rates and regional emplacement of large amounts of mostly acidic volcanics. The later basin formation and differentiation was triggered by reversals of the large-scale stress field and reactivation of prominent zones of weakness like the Elbe Fault System and the Rhenohercynian/Saxothuringian boundary that separate different Variscan basement domains in the area. The geomechanical behaviour of the latter plays an important role for the geodynamic evolution of the medium to large-scale structural units, which we can observe today in three dimensions on structural maps, geophysical recordings and digital models. This study concentrates on an area that comprises the southern Northeast German Basin, the Saale Basin, the Flechtingen High, the Harz Mountains High and the Subhercynian Basin. The presented data include re-evaluations of special geological and structural maps, the most recent interpretation of the DEKORP BASIN 9601 seismic profile and observations of exposed rock sections in Northeast Germany. On the basis of different structural inventories and different basement properties, we distinguish two structural units to the south and one structural unit to the north of the Elbe Fault System. For each unit, we propose a geomechanical model of basin formation and basin inversion, and show that the Rhenohercynian Fold and Thrust Belt domain is deformed in a thin-skinned manner, while the Mid-German Crystalline Rise Domain, which is the western part of the Saxothuringian Zone, rather shows a thick-skinned deformation pattern. The geomechanical model for the unit north to the Elbe Fault System takes account to the fact that the base of the Zechstein beneath the present Northeast German basin shows hardly any evidence for brittle deformation, which indicates a relative stable basement. Our geomechanical model suggests that the Permocarboniferous deposits may have contributed to the structural stiffness by covering small to medium scale structures of the upper parts of the brittle basement. It is further suggested that the pre-Zechstein successions underneath the present Northeast German basin were possibly strengthening during the Cretaceous basin inversion, which resulted in stress transfer to the long-lived master faults, as indicated for example by the shape of the salt domes in the vicinity of the latter faults. Contrary to this, post-Zechstein successions deformed in a different and rather complex way that was strongly biased by intensive salt tectonic movements.  相似文献   

Genesis and distribution of mineral waters as a consequence of recent lithospheric dynamics: the Rhenish Massif,Central Europe     

Franz May  Stephan Hoernes  Horst J. Neugebauer 《International Journal of Earth Sciences》1996,85(4):782-799

Three major, interdependent processes control the genesis and distribution of mineral and thermal waters in the Rhenish Massif, Central Europe: (a) Magmatic processes in the upper mantle provide most of the CO₂ to produce bicarbonate waters in shallow aquifers. (b) Extension of the brittle upper crust enables the ascent of sodium chloride waters. (c) Uplift and erosion shape the massif's relief, which determines the extent of flow systems and the distribution of thermal springs. The chemistry of mineral waters further depends on the aquifers' mineral composition. A comprehensive set of hydrological, chemical, tectonic and geophysical data on the Rhenish Massif has been compiled. It was used to classify the mineral waters and to map the spatial distribution of water properties. The composition of cuttings from several representative wells producing different water types shows that the hydrothermal alteration of the aquifer rocks consists mainly of kaolinization of chlorite and dissolution of feldspar. Numerical transport simulations favour two modes of groundwater flow: topography-driven flow and the pressure-driven ascent of basement brines along active faults. Thermal convection is less important.  相似文献   

区域农业用地营养盐剩余量的长期变化研究   总被引：5，自引：4，他引：1  

许朋柱  秦伯强  香宝  单正军  BEHRENDT Horst  黄文钰 《地理科学》2006,26(6):668-673

根据太湖南部长兴县农业统计资料,对该地区1949~2002年农业用地上N、P的剩余量作出评估。评估结果认为,1949~2002年期间,单位农业用地面积的N、P剩余量具有显著地增加趋势。20世纪50及60年代期间,N的剩余量增加缓慢,自70年代中期以后增加迅速。1996年达到历史最大值。1996年后,N剩余量呈现减少趋势。60年代初期以前,P处于亏损状态。1975~1980年期间,P剩余量呈现缓慢增长趋势,其后出现回落,自80年代中期以后出现迅速增加趋势。1992~1998年期间,P剩余量维持在35~45 kg/(hm²·a)之间的高水平变化,自1999年以后出现显著回落。  相似文献   

Heterogeneity of melts in impact deposits and implications for their origin (Ries suevite,Germany)     

Susann Siegert  Lutz Hecht 《Meteoritics & planetary science》2019,54(10):2409-2447

Impact melt‐bearing clastic deposits (suevites) are one of the most important records of the impact cratering process. A deeper understanding of their composition and formation is therefore essential. This study focuses on impact melt particles in suevite at Ries, Germany. Textures and chemical evidence indicate that the suevite contains three melt types that originate from different shock levels in the target. The most abundant melt type (“melt type 1”) represents well‐mixed whole‐rock melting of crystalline basement and includes incompletely mixed mafic melt schlieren (“melt type 1 mafic”). Polymineralic melt type 2 comprises mixes between monomineralic melt types 3 and melt type 1. Melt types 2 and 3 are located within melt type 1 as small patches or schlieren but also isolated within the suevite matrix. The main melt type 1 is heterogeneous with respect to trace elements, varying geographically around the crater: in the western sector, it has lower values in trace elements, e.g., Ba, Zr, Th, and Ce, than in the eastern sector. The west–east zoning likely reflects the heterogeneous nature of crystalline basement target rocks with lower trace element contents, e.g., Ba, Zr, Th, and Ce, in the west compared to the east. The chemical zoning pattern of suevite melt type 1 indicates that mixing during ejection and emplacement occurred only on a local (hundreds of meters) scale. The incomplete larger scale mixing indicated by the preservation of these local chemical signatures, and schlieren corroborate the assumption that mixing, ejection, and quenching were very rapid, short‐lived processes.  相似文献