Electromagnetic signals associated with stick–slip of quartz-free rocks     

Akito Tsutsumi  Nobumasa Shirai 《Tectonophysics》2008,450(1-4):79-84

We recorded clear transients in the electric and magnetic fields upon sudden slip in stick–slip experiments on dry, cylindrically shaped, quartz-free rock specimens of basalt and peridotite with a 30° saw-cut (representing a fault) at confining pressures of up to 120 MPa. The amplitudes of the measured electric field signals were always higher at the electrode pair oriented parallel to the strike of the fault than at the pair oriented perpendicular. This anisotropy suggests a preferred electric polarization normal to the slip surface. The transients in the electric and magnetic fields were observed only when the fault slip occurred by stick–slip mode, not by a stable mode of the sliding, and the amplitudes of the electric field signals increased with increasing stress drop. It is suggested that the generation process of the electromagnetic signals is closely related to the characteristic behavior of the fault at the time of the initiation of slip during stick–slip events, probably with respect to the intensity of the signals. We propose that one or both of the following two processes characteristic of the fault at the time of the initiation of slip during stick–slip events are essential for the generation of detectable electromagnetic signals: rapid slip along the simulated fault and separation of the rock masses across the fault.  相似文献   

Petrography and uplift history of the Quaternary Takidani Granodiorite: could it have hosted a supercritical (HDR) geothermal reservoir?     

Masatoshi Bando  Greg Bignall  Kotaro Sekine  Noriyoshi Tsuchiya   《Journal of Volcanology and Geothermal Research》2003,120(3-4):215-234

The Quaternary Takidani Granodiorite (Japan Alps) is analogous to the type of deep-seated (3–5 km deep) intrusive-hosted fracture network system that might support (supercritical) hot dry/wet rock (HDR/HWR) energy extraction. The I-type Takidani Granodiorite comprises: porphyritic granodiorite, porphyritic granite, biotite-hornblende granodiorite, hornblende-biotite granodiorite, biotite-hornblende granite and biotite granite facies; the intrusion has a reverse chemical zonation, characterized by >70 wt% SiO₂ at its inferred margin and <67 wt% SiO₂ at the core. Fluid inclusion evidence indicates that fractured Takidani Granodiorite at one time hosted a liquid-dominated, convective hydrothermal system, with <380°C, low-salinity reservoir fluids at hydrostatic (mesothermal) pressure conditions. ‘Healed’ microfractures also trapped >600°C, hypersaline (35 wt% NaCl_eq) fluids of magmatic origin, with inferred minimum pressures of formation being 600–750 bar, which corresponds to fluid entrapment at 2.4–3.0 km depth. Al-in-hornblende geobarometry indicates that hornblende crystallization occurred at about 1.45 Ma (7.7–9.4 km depth) in the (marginal) eastern Takidani Granodiorite, but later (at 1.25 Ma) and shallower (6.5–7.0 km) near the core of the intrusion. The average rate of uplift across the Takidani Granodiorite from the time of hornblende crystallization has been 5.1–5.9 mm/yr (although uplift was about 7.5 mm/yr prior to 1.2 Ma), which is faster than average uplift rates in the Japan Alps (3 mm/yr during the last 2 million years). A temperature–depth–time window, when the Takidani Granodiorite had potential to host an HDR system, would have been when the internal temperature of the intrusive was cooling from 500°C to 400°C. Taking into account the initial (7.5 mm/yr) rate of uplift and effects of erosion, an optimal temperature–time–depth window is proposed: for 500°C at 1.54–1.57 Ma and 5.2±0.9 km (drilling) depth; and 400°C at 1.36–1.38 Ma and 3.3±0.8 km (drilling) depth, which is within the capabilities of modern drilling technologies, and similar to measured temperature–depth profiles in other active hydrothermal systems (e.g. at Kakkonda, Japan).  相似文献   

Crack Extension in Hydraulic Fracturing of Shale Cores Using Viscous Oil,Water, and Liquid Carbon Dioxide     

Ziad Bennour  Tsuyoshi Ishida  Yuya Nagaya  Youqing Chen  Yoshitaka Nara  Qu Chen  Kotaro Sekine  Yu Nagano 《Rock Mechanics and Rock Engineering》2015,48(4):1463-1473

  相似文献   

Sorption behavior of the Pt(II) complex anion on manganese dioxide (δ-MnO2): a model reaction to elucidate the mechanism by which Pt is concentrated into a marine ferromanganese crust     

Mamiko Yamashita Maeno  Hironori Ohashi  Kotaro Yonezu  Akane Miyazaki  Yoshihiro Okaue  Koichiro Watanabe  Tamao Ishida  Makoto Tokunaga  Takushi Yokoyama 《Mineralium Deposita》2016,51(2):211-218

  相似文献   

Petrology and geochemistry of Northwest Africa 5480 diogenite and evidence for a basin‐forming event on Vesta          下载免费PDF全文

A. Yamaguchi  J. A. Barrat  N. Shirai  M. Ebihara 《Meteoritics & planetary science》2015,50(7):1260-1270

We performed a petrological and geochemical study of an olivine diogenite, Northwest Africa (NWA) 5480. NWA 5480 is a crystalline stone, but shows a heterogeneous texture. Olivine aggregates and grains of olivine and chromite display resorption textures set in a crystalline pyroxene matrix. Large olivine aggregates are penetrated by pyroxene matrix. Flow textures are observed near olivine aggregates. Olivine, chromite, and pyroxene show minor chemical zoning, implying relatively rapid cooling. NWA 5480 contains a significant amount of platinum group elements with chondritic relative proportions. All this evidence supports that NWA 5480 is an impact‐melt breccia from a target composed of olivine and pyroxene‐rich lithologies. Such impact melt would have formed by melting crustal materials, possibly during one of the impacts that formed the South Pole basins on Vesta.  相似文献   

Crustal partial melting on Vesta: Evidence from highly metamorphosed eucrites     

A. Yamaguchi  J.A. Barrat  R.C. Greenwood  N. Shirai  C. Okamoto  T. Setoyanagi  M. Ebihara  I.A. Franchi  M. Bohn 《Geochimica et cosmochimica acta》2009,73(23):7162-7182

We have performed a mineralogical and geochemical study of eight metamorphosed basaltic eucrites. These are classified into granulitic eucrites and type 4–7 eucrites on the basis of their textures and pyroxene mineralogy, and display mineralogical evidence for high temperature metamorphism, including partial melting. In particular, rare earth element (REE) patterns of a number of the eucrites studied show varying degrees of light REE depletion due to partial melting, with subsequent melt extraction. A simple correlation between metamorphic grade, as deduced from pyroxene mineralogy, and the degree of light REE depletion was not detected. This can be explained by the fact that homogenization, exsolution and inversion of pigeonite would have required prolonged heating at moderate temperatures (800–1000 °C), whereas partial melting would have taken place over a short time interval where temperatures exceeded that of the solidus. The eucrites studied therefore record a two stage thermal regime consisting of short, high temperature reheating events superimposed on long duration global crustal metamorphism. The short reheating events may have been caused by impact events and/or intrusions of hot magmas. The results of this study demonstrate that the thermal history of eucritic crust was more complex than can be explained by a simple burial model alone. In particular, the origin of Stannern trend eucrites requires contamination of Main-Group magmas by partial melts extracted from residual eucrites.  相似文献   

Dense gas in normal and active galaxies     

Kotaro Kohno  Koichiro Nakanishi  Tomoka Tosaki  Kazuyuki Muraoka  Rie Miura  Hajime Ezawa  Ryohei Kawabe 《Astrophysics and Space Science》2008,313(1-3):279-285

Dense molecular medium plays essential roles in galaxies. As demonstrated by the tight and linear correlation between HCN(1–0) and FIR luminosities among star-forming galaxies, from very nearby to high-z ones, the observation of a dense molecular component is indispensable to understand the star formation laws in galaxies. In order to obtain a general picture of the global distributions of dense molecular medium in normal star-forming galaxies, we have conducted an extragalactic CO(3–2) imaging survey of nearby spiral galaxies using the Atacama Submillimeter Telescope Experiment (ASTE). From the survey (ADIoS; ASTE Dense gas Imaging of Star-forming galaxies), CO(3–2) images of M 83 and NGC 986 are presented. Emphasis is placed on the correlation between the CO(3–2)/CO(1–0) ratio and the star formation efficiency in galaxies. In the central regions of some active galaxies, on the other hand, we often find enhanced or overluminous HCN(1–0) emission. The HCN(1–0)/CO(1–0) and HCN(1–0)/HCO⁺(1–0) intensities are often enhanced up to ∼0.2–0.3 and ∼2–3, respectively. Such elevated ratios have never been observed in the nuclear starburst regions. One possible explanation for these high HCN(1–0)/CO(1–0) and HCN(1–0)/HCO⁺(1–0) ratios is X-ray induced chemistry in X-ray dominated regions (XDRs), i.e., the overabundance of the HCN molecule in the X-ray irradiated dense molecular tori. If this view is true, the known tight correlation between HCN(1–0) and the star-formation rate breaks in the vicinity of active nuclei. Although the interpretation of these ratios is still an open question, these ratios have a great potential for a new diagnostic tool for the energy sources of dusty galaxies in the ALMA era because these molecular lines are free from dust extinction.  相似文献   

The effects of possible contamination by sample holders on samples to be returned by Hayabusa2     

Naoki Shirai  Yuzuru Karouji  Kazuya Kumagai  Masayuki Uesugi  Kaori Hirahara  Motoo Ito  Naotaka Tomioka  Kentaro Uesugi  Akira Yamaguchi  Naoya Imae  Takuji Ohigashi  Toru Yada  Masanao Abe 《Meteoritics & planetary science》2020,55(7):1665-1680

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Chemical characteristics of the lherzolitic shergottite Yamato 000097: magmatism on Mars inferred from the chemical compositions of shergottites   总被引：1，自引：1，他引：0  

Naoki Shirai  Mitsuru Ebihara 《Polar Science》2009,3(2):117-133

As a part of a consortium study, we analyzed the Martian meteorite Yamato (Y) 000097 by prompt gamma-ray analysis, instrumental neutron activation analysis, and instrumental photon activation analysis. For comparison, we also analyzed Allan Hills (ALH) 77005 using the same methods. The data confirm that Y000097 belongs to lherzolitic shergottites in terms of chemical composition. Although there exist slight differences in elemental abundances among lherzolitic shergottites due to differences in the modal abundances of constituent minerals, they have essentially the same chemical compositions, suggesting they are genetically related and experienced similar formation histories.Zr/Hf ratios obtained for Y000097 and ALH 77005 are subchondritic, consistent with values reported for other lherzolitic shergottites and olivine-phyric shergottites. Such fractionation can be explained by invoking clinopyroxene, ilmenite, or majorite in the petrogenesis of the shergottites' source material. CI-normalized Hf/Sm ratios obtained for Y000097 and ALH 77005 are 1.52 and 1.37, respectively, consistent with superchondritic Hf/Sm ratios reported for shergottites. Based on experimentally derived partition coefficients, majorite is the best candidate mineral for the fractionation of Hf and Sm in shergottites.  相似文献