Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Estimating average shock pressures recorded by impactite samples based on universal stage investigations of planar deformation features in quartz—Sources of error and recommendations          下载免费PDF全文

S. Holm-Alwmark  L. Ferrière  C. Alwmark  M. H. Poelchau 《Meteoritics & planetary science》2018,53(1):110-130

Planar deformation features (PDFs) in quartz are the most widely used indicator of shock metamorphism in terrestrial rocks. They can also be used for estimating average shock pressures that quartz-bearing rocks have been subjected to. Here we report on a number of observations and problems that we have encountered when performing universal stage measurements and crystallographically indexing of PDF orientations in quartz. These include a comparison between manual and automated methods of indexing PDFs, an evaluation of the new stereographic projection template, and observations regarding the PDF statistics related to the c-axis position and rhombohedral plane symmetry. We further discuss the implications that our findings have for shock barometry studies. Our study shows that the currently used stereographic projection template for indexing PDFs in quartz might induce an overestimation of rhombohedral planes with low Miller–Bravais indices. We suggest, based on a comparison of different shock barometry methods, that a unified method of assigning shock pressures to samples based on PDFs in quartz is necessary to allow comparison of data sets. This method needs to take into account not only the average number of PDF sets/grain but also the number of high Miller–Bravais index planes, both of which are important factors according to our study. Finally, we present a suggestion for such a method (which is valid for nonporous quartz-bearing rock types), which consists of assigning quartz grains into types (A–E) based on the PDF orientation pattern, and then calculation of a mean shock pressure for each sample.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

Ground-based GPS imaging of ionospheric post-seismic signal     

Philippe Lognonné  Juliette Artru  François Crespon  Eric Jeansou  Jérôme Helbert  Pierre-Emmanuel Godet 《Planetary and Space Science》2006,54(5):528-540

  相似文献   

Mineral compositions in Antarctic and Greenland micrometeorites     

Mireille Christophe Michel-Levy  Michle Bourot-Denise 《Meteoritics & planetary science》1992,27(1):73-80

Abstract— The mineral compositions of 250 micrometeorites have been studied and olivines and low-calcium pyroxenes with crystals larger than 5 μm have been analyzed. While magnesium-rich grains dominate, the Fa content of olivine may reach 50% and the Fs content of pyroxene may reach 26%. The Ca and Mn of the olivine show no consistent trends with increasing Fe, but Cr shows a negative correlation. For low-Ca pyroxene, Al and Cr contents are generally higher than in pyroxenes of equilibrated chondrites but similar to those of highly unequilibrated chondrites. Calcium-bearing pyroxene, feldspar and chromite are rare in the micrometeorites which were selected because of their high Mg, Si, Fe and their low Ca and Al content. All these minerals are found as coarse-grained particles often with adhering iron-rich scoria or as clasts in fine-grained or scoriaceous micrometeorites. Apart from a few particles which could be the debris of ordinary chondrites, most micrometeorites probably come from a common source similar, but not identical to carbonaceous chondrites, as shown by their lower Ni and S content and their different oxygen isotopic composition assuming two measurements performed on olivine grains prove to be typical.  相似文献   

Examples of clustering around high redshift radio-galaxies     

J. M. Deltorn  O. Le Fèvre 《Astrophysics》1995,38(4):379-381

Published in Astrofizika, Vol. 38, No. 4, pp. 677–680, October–December, 1995.  相似文献   

Description of new shock‐induced phases in the Shergotty,Zagami, Nakhla and Chassigny meteorites     

Valrie Malavergne  Franois Guyot  Karim Benzerara  Isabelle Martinez 《Meteoritics & planetary science》2001,36(10):1297-1305

  相似文献   

Fluctuation analysis of the far-infrared background – information from the confusion     

Yasmin Friedmann  François Bouchet 《Monthly notices of the Royal Astronomical Society》2004,348(3):737-744

  相似文献   

A 20 cm2 CCD mosaic camera for a dark matter search part I : Mechanics,optics and cryogeny     

Arnaud  M.  Aubourg  E.  Bareyre  P.  Br';ehin  S.  Caridroit  R.  de Kat  J.  Dispau  G.  Djidi  K.  Gros  M.  Lachièze-Rey  M.  Laigneau  Y.  Laurent  B.  Lesquoy  E.  Lavocat  Ph.  Magneville  C.  Mazeau  B.  Milsztajn  A.  Moscoso  L.  Pasquaud  J.  Paul  B.  Perrin  P.  Petibon  J.  Piret  Y.  Queinnec  F.  Rich  J.  Spiro  M.  de Trogoff  J.  Vigroux  L.  Zylberajch  S.  Ansari  R.  Cavalier  F.  Moniez  M.  Beaulieu  J. P.  Ferlet  R.  Grison  Ph.  Vidal-Madjar  A.  Adrianzyk  G.  Berger  J. P.  Burnage  R.  Delclite  J. C.  Kohler  D.  Magnan  R.  Richaud  A.  Guibert  J.  Moreau  O.  Tajahmady  F.  Baranne  A.  Maurice  E.  Prévôt  L.  Gry  C. 《Experimental Astronomy》1994,4(3-4):265-278

A 20cm ² CCD mosaic camera has been especially built to search for dark galactic halo objects by the gravitational microlensing effect. The sensitive area is made of 16 edge-buttable CCDs developped by Thomson-CTS, with 23×23 µm ² pixels. The 35 kg camera housing and mechanical equipment is presented. The associated electronics and data acquisition system are described in a separate paper. The camera resides at the focal plane of a 40 cm, f/10, Ferson reflector. The instrument has been in operation since December 1991 at the La Silla Observatory (ESO).  相似文献   

WIMPs and solar evolution code     

Yannick Giraud-Héraud  Jean Kaplan  François De Volnay Martin  Charling Tao  Sylvaine Turck-Chièze 《Solar physics》1990,128(1):21-33

The Saclay solar evolution code is used to check the effect of WIMPs on solar evolution. In this paper we study the effects of various types of Cosmion-matter interactions, give constraints on the crosssections compatible with the measured neutrino rate of 2 SNU on chlorine, and relate these constraints to ongoing dark matter detection experiments.Unité associée au CNRS UA 280, F-75251 Paris Cedex 05, France.On leave from LPC, Collège de France.  相似文献