利用海洋重力场变化分析洋底板块运动          下载免费PDF全文

李倩倩  鲍李峰  C. K. Shum 《地球物理学报》2020,63(7):2506-2515

洋底板块运动是地球动力学和全球变化研究的重要内容.本文根据质量迁移与地球外部重力场变化的对应关系,利用不同时期测高资料推算的1995—2019全球海洋重力场变化结果,反演分析全球洋底板块运动特征.研究表明,板块汇聚边界、板块内无震海岭、海山群、断裂带等区域重力异常变化显著,而在板块离散边界无明显变化趋势;西南印度洋中脊、大西洋中脊、中印度洋中脊等地区重力异常垂直梯度变化显著,且在西太平洋俯冲带、部分海岭区域也存在明显变化,其空间分布与地形基本吻合.海洋重力场变化整体上准确反映了全球洋底板块构造运动.相较于重力异常变化反演结果,重力垂直梯度的变化能够更为准确地反映洋底板块运动特征,特别是在洋中脊区域,扩张速率越小,垂直重力梯度变化越显著.此外,详细讨论了测高海洋重力场不确定因素对洋底板块运动分析结果的影响,海面坡度改正是主要因素之一.  相似文献   

Terrestrial LiDAR monitoring of coastal foredune evolution in managed and unmanaged systems     

I. Conery  K. Brodie  N. Spore  J. Walsh 《地球表面变化过程与地形》2020,45(4):877-892

Coastal dunes provide essential protection for infrastructure in developed regions, acting as the first line of defence against ocean-side flooding. Quantifying dune erosion, growth and recovery from storms is critical from management, resiliency and engineering with nature perspectives. This study utilizes 22 months of high-resolution terrestrial LiDAR (Riegl VZ-2000) observations to investigate the impact of management, anthropogenic modifications and four named storms on dune morphological evolution along ~100 m of an open-coast, recently nourished beach in Nags Head, NC. The influences of specific management strategies – such as fencing and plantings – were evaluated by comparing these to the morphologic response at an unmanaged control site at the USACE Field Research Facility (FRF) in Duck, NC (33 km to the north), which experienced similar environmental forcings. Various beach-dune morphological parameters were extracted (e.g. backshore-dune volume) and compared with aeolian and hydrodynamic forcing metrics between each survey interval. The results show that LiDAR is a useful tool for quantifying complex dune evolution over fine spatial and temporal scales. Under similar forcings, the managed dune grew 1.7 times faster than the unmanaged dune, due to a larger sediment supply and enhanced capture through fencing, plantings and walkovers. These factors at the managed site contributed to the welding of the incipient dune to the primary foredune over a short period of less than a year, which has been observed to take up to decades in natural systems. Storm events caused alongshore variable dune erosion primarily to the incipient dune, yet also caused significant accretion, particularly along the crest at the managed site, resulting in net dune growth. Traditional empirical Bagnold equations correlated with observed trends of backshore-dune growth but overpredicted magnitudes. This is likely because these formulations do not encompass supply-limiting factors and erosional processes. © 2019 John Wiley & Sons, Ltd.  相似文献   

Evaluation of Interactions Between Oilfield Chemicals and Reservoir Rocks     

Wuyep  E. O.  Oluyemi  G. F.  Yates  K.  Akisanya  A. R. 《Natural Resources Research》2020,29(2):1239-1258

Natural Resources Research - Sand failure and production occurs when the formation stress exceeds the strength of the formation, which is derived majorly from the natural material that cements the...  相似文献   

Experimental study on seismic behavior of Un-Reinforced Masonry (URM) brick walls strengthened with shotcrete     

M. Shabdin  Nader K. A. Attari  M. Zargaran 《Bulletin of Earthquake Engineering》2018,16(9):3931-3956

In this study, the efficiency of conventional shotcrete technique for strengthening of Un-Reinforced Masonry (URM) walls was shown using an experimental program. In addition, in this program the possible benefit of using anchors for connecting the shotcrete reinforcement layer to the R/C foundation was studied. The experimental program consisted of testing five full scale specimens with two different height-to-length aspect ratios and so different failure modes, under in-plane cyclic loading conditions. Two specimens were tested as reference and others were strengthened on a single-face using shotcrete layer. According to the results, strengthening of URM walls using traditional shotcrete approach created a completely stiff panel and prevented the formation of cracks. The failure mode in both reference and strengthened short length walls was rocking and the shotcrete layer could increase the strength capacity, energy dissipation, and stiffness of wall due to yielding and rupture of steel bars anchored to the foundation. On the other hand, in strengthened long length walls, shotcrete layer increased the shear sliding capacity with no or small increasing in their rocking capacity. Therefore, the failure mode of strengthened walls converted from shear sliding to rocking, even in the specimen with anchorage system. The distributed type of anchorage system could not improve the strength capacity of long length wall. Anchorage system was able to improve the out-of-plane performance of strengthened walls.  相似文献   

Evolution of seismic hazard maps in Turkey     

S. Akkar  T. Azak  T. Çan  U. Çeken  M. B. Demircioğlu Tümsa  T. Y. Duman  M. Erdik  S. Ergintav  F. T. Kadirioğlu  D. Kalafat  Ö. Kale  R. F. Kartal  K. Kekovalı  T. Kılıç  S. Özalp  S. Altuncu Poyraz  K. Şeşetyan  S. Tekin  A. Yakut  M. T. Yılmaz  M. S. Yücemen  Ö. Zülfikar 《Bulletin of Earthquake Engineering》2018,16(8):3197-3228

A review on the historical evolution of seismic hazard maps in Turkey is followed by summarizing the important aspects of the updated national probabilistic seismic hazard maps. Comparisons with the predecessor probabilistic seismic hazard maps as well as the implications on the national design codes conclude the paper.  相似文献   

Low‐P and high‐T metamorphism of basalts: Insights from the Sudbury impact melt sheet aureole and thermodynamic modelling     

Taus R. C. Jrgensen  Douglas K. Tinkham  C. Michael Lesher 《Journal of Metamorphic Geology》2019,37(2):271-313

Low‐pressure and high‐temperature (LP–HT) metamorphism of basaltic rocks, which occurs globally and throughout geological time, is rarely constrained by forward phase equilibrium modelling, yet such calculations provide valuable supplementary thermometric information and constraints on anatexis that are not possible to obtain from conventional thermometry. Metabasalts along the southern margin of the Sudbury Igneous Complex (SIC) record evidence of high‐grade contact metamorphism involving partial melting and melt segregation. Peak metamorphic temperatures reached at least ~925°C at ~1–3 kbar near the SIC contact. Preservation of the peak mineral assemblage indicates that most of the generated melt escaped from these rocks leaving a residuum characterized by a plagioclase–orthopyroxene–clinopyroxene–ilmenite‐magnetite±melt assemblage. Peak temperatures reached ~875°C up to 500 m from the SIC lower contact, which marks the transition to metabasalts that only experienced incipient partial melting without melt loss. Metabasalts ~500 to 750 m from the SIC contact are characterized by a similar two‐pyroxene mineral assemblage, but typically contain abundant hornblende that overgrew clino‐ and orthopyroxene along an isobaric cooling path. Metabasalts ~750 to 1,000 m from the SIC contact are characterized by a hornblende–plagioclase–quartz–ilmenite assemblage indicating temperatures up to ~680°C. Mass balance and phase equilibria calculations indicate that anatexis resulted in 10–20% melt generation in the inner ~500 m of the aureole, with even higher degrees of melting towards the contact. Comparison of multiple models, experiments, and natural samples indicates that modelling in the Na₂O–CaO–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O₂ (NCFMASHTO) system results in the most reliable predictions for the temperature of the solidus. Incorporation of K₂O in the most recent amphibole solution model now successfully predicts dehydration melting by the coexistence of high‐Ca amphibole and silicate melt at relatively low pressures (~1.5 kbar). However, inclusion of K₂O as a system component results in prediction of the solidus at too low a temperature. Although there are discrepancies between modelling predictions and experimental results, this study demonstrates that the pseudosection approach to mafic rocks is an invaluable tool to constrain metamorphic processes at LP–HT conditions.  相似文献   

Late Holocene environmental changes reconstructed from stable isotope and geochemical records from a cushion‐plant peatland in the Chilean Central Andes (27°S)     

S. T. Kock  K. Schittek  B. Mchtle  H. Wissel  A. Maldonado  A. Lücke 《第四纪科学杂志》2019,34(2):153-164

  相似文献   

Late Quaternary sea‐level change and evolution of Belfast Lough,Northern Ireland: new offshore evidence and implications for sea‐level reconstruction     

Ruth M. K. Plets  S. Louise Callard  J. Andrew G. Cooper  Joseph T. Kelley  Daniel F. Belknap  Robin J. Edwards  Antony J. Long  Rory J. Quinn  Derek W. T. Jackson 《第四纪科学杂志》2019,34(4-5):285-298

The interplay of eustatic and isostatic factors causes complex relative sea‐level (RSL) histories, particularly in paraglacial settings. In this context the past record of RSL is important in understanding ice‐sheet history, earth rheology and resulting glacio‐isostatic adjustment. Field data to develop sea‐level reconstructions are often limited to shallow depths and uncertainty exists as to the veracity of modelled sea‐level curves. We use seismic stratigraphy, 39 vibrocores and 26 radiocarbon dates to investigate the deglacial history of Belfast Lough, Northern Ireland, and reconstruct past RSL. A typical sequence of till, glacimarine and Holocene sediments is preserved. Two sea‐level lowstands (both max. ?40 m) are recorded at c. 13.5 and 11.5k cal a bp . Each is followed by a rapid transgression and subsequent periods of RSL stability. The first transgression coincides temporally with a late stage of Meltwater Pulse 1a and the RSL stability occurred between c. 13.0 and c. 12.2k cal a bp (Younger Dryas). The second still/slowstand occurred between c. 10.3 and c. 11.5k cal a bp . Our data provide constraints on the direction and timing of RSL change during deglaciation. Application of the Depth of Closure concept adds an error term to sea‐level reconstructions based on seismic stratigraphic reconstructions.  相似文献   

Morphometry and Morphostructural Studies of the Parts of Gola River and Kalsa River Basins,Chanphi-Okhalkanda Region,Kumaun Lesser Himalaya,India     

Lal. Kumar  Joshi  G.  Agarwal  K. K. 《Geotectonics》2020,54(3):410-427

Geotectonics - Study of morphometric parameters such as stream length (Lu) and stream length ratios (Rl), bifurcation ratio (Rb), drainage density (D), form factor (Rf), circularity ratio (Rc),...  相似文献   

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin     

Ardiansyah Koeshidayatullah  Hilary Corlett  Jack Stacey  Peter K. Swart  Adrian Boyce  Hamish Robertson  Fiona Whitaker  Cathy Hollis 《Sedimentology》2020,67(6):2945-2973

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献