排序方式： 共有48条查询结果，搜索用时 62 毫秒
1.
2.
Inelastic deformation capacity of links is a factor that significantly influences design of steel eccentrically braced frames (EBFs). The link rotation angle is used to describe inelastic link deformation. The link rotation angle is generally calculated by making use of design story drifts that in turn are calculated by modifying the elastic displacements by a displacement amplification factor. This paper presents a numerical study undertaken to evaluate the displacement amplification factor given in ASCE7‐10 for EBFs and the rigid‐plastic mechanism used for calculating link rotation angles. A total of 72 EBFs were designed by considering the number of stories, the bay width, the link length to bay width ratio, and the seismic hazard level as the prime variables. All structures were analyzed using elastic and inelastic time history analyses. The results indicated that the displacement amplification factor given in ASCE7‐10 provides unconservative estimates of the story drifts. On the other hand, the rigid‐plastic mechanism provides conservative estimates of link rotations. Based on the results of the numerical study, a new set of displacement amplification factors that vary along the height of the structure and modifications to the rigid‐plastic mechanism were developed. In light of the proposed modifications, the EBFs were redesigned and analyzed using inelastic time history analysis. The results indicated that the proposed modifications provide improvements for the displacement amplification factor and link rotation angle calculation procedures. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
3.
Mustafa Erdik Karin Sesetyan Mine Demircioglu Ufuk Hancilar Can Zulfikar Eser Cakti Yaver Kamer Cem Yenidogan Cuneyt Tuzun Zehra Cagnan Ebru Harmandar 《Acta Geophysica》2010,58(5):855-892
The almost-real time estimation of ground shaking and losses after a major earthquake in the Euro-Mediterranean region was performed in the framework of the Joint Research Activity 3 (JRA-3) component of the EU FP6 Project entitled “Network of Research Infra-structures for European Seismology, NERIES”. This project consists of finding the most likely location of the earthquake source by estimating the fault rupture parameters on the basis of rapid inversion of data from on-line regional broadband stations. It also includes an estimation of the spatial distribution of selected site-specific ground motion parameters at engineering bedrock through region-specific ground motion prediction equations (GMPEs) or physical simulation of ground motion. By using the Earthquake Loss Estimation Routine (ELER) software, the multi-level methodology developed for real time estimation of losses is capable of incorporating regional variability and sources of uncertainty stemming from GMPEs, fault finiteness, site modifications, inventory of physical and social elements subjected to earthquake hazard and the associated vulnerability relationships. 相似文献
4.
Tertiary volcanics in the northern zone of the Eastern Pontides are characterized by subaerial and shallow-subaqueous facieses, and are divided into three volcanic suites: Eocene aged (1) basalt-trachybasalt-basaltic trachyandesite (BTB) and (2) trachyte-trachyandesite (TT), and Miocene aged (3) basanite-tephrite (BT) suites. Clinopyroxene is a common phase in all three volcanic suites, and has different compositions with Mg# varying from 0.57 to 0.91 in BTB suite and 0.57–0.84 in TT suite to 0.65–0.90 in BT suite. Feldspars in all suites generally exhibit wide range of compositions from sanidine to albite or anorthite and have weak normal and reverse compositional zoning. Olivines in BTB and BT suites have Fo60–92. Hornblendes in BTB, TT and BT suites are commonly magnesio-hastingsite and rare pargasite in composition (Mg#: 0.67–0.90). Brown mica is mainly phlogopite with Mg# ranging from 0.56 to 0.92 in the BTB suite, 0.59–0.84 in the TT suite, and 0.75–0.93 in the BT suite. Analcime is present only in the BT suite rocks. Fe–Ti oxides in all suites are mainly composed of magnetite and titanomagnetite. Textural petrographic and mineral chemical data suggest that magmas had undergone hydrous and anhydrous crystallizations in deep-, mid-, and shallow-crustal magma chambers. Clinopyroxene thermobarometric calculations show that Eocene magma chambers were characterized by temperature ranging from 1,100 to 1,244 °C and pressure ranging from 1.84 to 5.39 kbar. Similarly, the Miocene magma chambers were characterized by temperature ranging from 1,119 to 1,146 °C and pressure ranging from 4.23 to 4.93 kbar. Hornblende thermobarometry, oxygen fugacity, and hygrometer reveal that the crystallization temperature of Eocene volcanics range from 956 to 959 °C at pressure ranging from 6.49 to 6.52 kbar. Eocene volcanics were characterized by water content ranging from 7.83 to 8.57 wt.% and oxygen fugacity of 10?9.36 to 10?9.46 (ΔNNO+2). Miocene volcanics had crystallization temperature ranging from 970 to 978 °C at pressure ranging from 8.70 to 9.00 kbar with water content ranging from 8.04 to 8.64 wt.% and oxygen fugacity ranging from 10?8.75 to 10?8.87 (ΔNNO+2). Brown mica thermobarometric data show that Eocene volcanics were characterized by relatively high oxygen fugacity varying from 10-10.32 to 10-12.37 (HM) at temperature ranging from 858 to 953 °C and pressure ranging from 1.08 to 1.41 kbar. Miocene volcanics were crystallized at highly oxidized conditions, which are characterized by high oxygen fugacity of 10?12.0 (HM) at temperature of 875 °C and pressure of 2.09 kbar. The wide range of obtained temperatures for clinopyroxenes of the suites denotes that the equilibration of clinopyroxene crystals initiates from depth until close to the surface before magma eruption. The compositional variations, resorbed core and reverse zoning patterns in clinopyroxene phenocrysts, as well as variable pressures of crystallization, further indicate that the magmas that formed the suites were polybaric in origins and were composite products of more than one petrogenetic stage. The observed range of phenocryst assemblage and different compositional trends possibly originated from fractionation of magmas with different initial water contents under variable pressures of crystallization. The repeated occurrence of magmas from different suites during a single period of activity suggests that the magmatic system consists of several conduit systems and that magma reservoirs are dispersed at different levels of crustal magma chambers. 相似文献
5.
Erkan G?ka?an Cem Gazio?lu Bedri Alpar Zeki Yücel ?ükrü Ersoy O?uz Gündo?du Cenk Yalt?rak Buser Tok 《Geo-Marine Letters》2002,21(4):183-199
Active faults aligning in NW–SE direction and forming flower structures of strike-slip faults were observed in shallow seismic data from the shelf offshore of Avcılar in the northern Marmara Sea. By following the parallel drainage pattern and scarps, these faults were traced as NW–SE-directed lineaments in the morphology of the northern onshore sector of the Marmara Sea (eastern Thrace Peninsula). Right-lateral displacements in two watersheds of drainage and on the coast of the Marmara Sea and Black Sea are associated with these lineaments. This right-lateral displacement along the course of these faults suggests a new, active strike-slip fault zone located at the NW extension of the northern boundary fault of the ?ınarcık Basin in the Marmara Sea. This new fault zone is interpreted as the NW extension of the northern branch of the North Anatolian Fault Zone (NAFZ), extending from the ?ınarcık Basin of the Marmara Sea to the Black Sea coast of the Thrace Peninsula, and passing through B üy ük ?ekmece and K ü ? ük ?ekmece lagoons. These data suggest that the rupture of the 17 August 1999 earthquake in the NAFZ may have extended through Avcılar. Indeed, Avcılar and İzmit, both located on the Marmara Sea coast along the rupture route, were strongly struck by the earthquake whereas the settlements between Avcılar and İzmit were much less affected. Therefore, this interpretation can explain the extraordinary damage in Avcılar, based on the newly discovered rupture of the NAFZ in the Marmara Sea. However, this suggestion needs to be confirmed by further seismological studies. 相似文献
6.
Erkan Gökaşan Cem Gazioğlu Bedri Alpar Zeki Yücel Şükrü Ersoy Oğuz Gündoğdu Cenk Yaltırak Buser Tok 《Geo-Marine Letters》2001,21(4):183-199
Active faults aligning in NW–SE direction and forming flower structures of strike-slip faults were observed in shallow seismic data from the shelf offshore of Avc?lar in the northern Marmara Sea. By following the parallel drainage pattern and scarps, these faults were traced as NW–SE-directed lineaments in the morphology of the northern onshore sector of the Marmara Sea (eastern Thrace Peninsula). Right-lateral displacements in two watersheds of drainage and on the coast of the Marmara Sea and Black Sea are associated with these lineaments. This right-lateral displacement along the course of these faults suggests a new, active strike-slip fault zone located at the NW extension of the northern boundary fault of the Ç?narc?k Basin in the Marmara Sea. This new fault zone is interpreted as the NW extension of the northern branch of the North Anatolian Fault Zone (NAFZ), extending from the Ç?narc?k Basin of the Marmara Sea to the Black Sea coast of the Thrace Peninsula, and passing through B üy ük çekmece and K ü ç ük çekmece lagoons. These data suggest that the rupture of the 17 August 1999 earthquake in the NAFZ may have extended through Avc?lar. Indeed, Avc?lar and ?zmit, both located on the Marmara Sea coast along the rupture route, were strongly struck by the earthquake whereas the settlements between Avc?lar and ?zmit were much less affected. Therefore, this interpretation can explain the extraordinary damage in Avc?lar, based on the newly discovered rupture of the NAFZ in the Marmara Sea. However, this suggestion needs to be confirmed by further seismological studies. 相似文献
7.
Irfan Temizel Mehmet Arslan Cem Yücel Emel Abdioğlu Yazar Abdullah Kaygusuz Zafer Aslan 《International Geology Review》2020,62(9):1131-1158
ABSTRACT Eocene intermediate to felsic plutons of different sizes and compositions are widespread in the Eastern Pontides Orogenic Belt in northern Turkey. Of these, the Ta?l?k Tepe pluton in the Havza (Samsun) area is fine-to-medium-grained, with granular, porphyritic, and micrographic textures, and include mafic microgranular enclaves (MMEs). LA-ICP-MS U-Pb zircon dating yielded emplacement ages of 42.9 (± 1.4) and 40.5 (± 1.3) Ma for the host granodioritic pluton and the dioritic MMEs, respectively. Petrochemically, the host pluton has I-type, high-K calc-alkaline, and metaluminous-to-slightly peraluminous features (A/CNK = 0.95–1.06). The host pluton also shows geochemical features of adakite-like rocks with high SiO2 (67–68 wt%) and Al2O3 (15.5–16.0 wt%) content and Ba/La (17–23), Sr/Y (40.7–61.6), and LaN/YbN (14.4–23.7) ratios and low Y (8.2–9.9 ppm) and YbN (3.1–4.4) contents. Whole-rock major and trace element variations suggest that fractional crystallisation played a significant role in the pluton evolution. The N-MORB normalised trace element patterns of the pluton are similar to those of MMEs with enrichment in large-ion lithophile elements, Th and Ce, and negative Nb and Ti anomalies. Chondrite-normalised rare earth element plots show moderate-to-highly enriched concave patterns (LaN/LuN = 14.2–21.6) with insignificant negative Eu anomalies (EuN/Eu* = 0.86–1.14), all of which imply hornblende fractionation during magmatic evolution. The pluton samples have 87Sr/86Sr ratios of 0.704767 to 0.704927, 143Nd/144Nd ratios of 0.512767–0.512774, εNd values of (+2.52) – (+2.65), and δ18O values of 7.9–9.7‰. The isotopic compositions of the host pluton and MMEs are similar to I-type granitoids derived from mantle sources. The MMEs show incomplete magma mixing/mingling, representing small bodies of mafic parental magma. Combined with regional studies, these new data suggest that the parental magma of the studied adakite-like pluton was generated from the lithospheric mantle and then modified by fractional crystallisation and assimilation in a post-collisional setting. 相似文献
8.
The Muratdagi region is rich in antimony deposits having the following common characteristics: post Miocene age, location on the down-thrown blocks next to normal faults, in the vicinity of active or fossil thermal springs, and in contact with carbonate rocks. The isotopic composition of — 7. SMOW of the mineralizing fluid calculated from the measured °
18O of quartz and the fluid inclusion microthermometry, is indicative of meteoric water origin. The °
13C of the inclusion CO2 of — 19.1 to — 25.4 PDB is indicative of interaction with organic material-graphite. The °
34S of stibnite — 3.6 to — 0.7 is, in view of the mineral assemblage, indicative of magmatic origin of the sulphur. A tightly confined set of structural, lithological, hydrological and geochemical features define a sequence of geochemical processes; formation of acid and reducing fluid, leaching and transport of antimony complexes and precipitation of stibnite within defined lithological units. The set of processes seems to have taken place within a space of 5000 m lateral and 1000 m vertical extension. 相似文献
9.
Ground motion scaling in the Marmara region, Turkey 总被引：1，自引：0，他引：1
A. Akinci L. Malagnini R. B. Herrmann R. Gok M. B. Sørensen 《Geophysical Journal International》2006,166(2):635-651
10.
This paper reports findings of an experimental study conducted on replaceable links for steel eccentrically braced frames (EBFs). A replaceable link detail which is based on splicing the directly connected braces and the beam outside the link is proposed. This detail eliminates the need to use hydraulic jacks and flame cutting operations for replacement purposes. Performance of this proposed replaceable link was studied by conducting eight nearly full‐scale EBF tests under quasi‐static cyclic loading. The link length ratio, stiffening of the link, loading protocol, connection type, bolt pretension, gap size of splice connections, and demand‐to‐capacity ratios of members were considered as the prime variables. The specimens primarily showed two types of failure modes: link web fracture and fracture of the flange at the link‐to‐brace connection. No failures were observed at the splice connections indicating that the proposed replaceable link detail provides an excellent response. The inelastic rotation capacity provided by the replaceable links satisfied the requirements of the AISC Seismic Provisions for Structural Steel Buildings (AISC341–10). The overstrength factor of the links exceeded 2.0, which is larger than the value assumed for EBF links by design provisions. The high level of overstrength resulted in brace buckling in one of the specimens demonstrating the importance of overstrength factor used for EBF links. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献