Climatic signals in lacustrine deposits of the Upper Yacoraite Formation,Western Argentina: Evidence from clay minerals,analcime, dolomite and fibrous calcite     

João Paulo B. Gomes  Rodrigo B. Bunevich  Sandra N. Tonietto  Daisy B. Alves  Julice F. Santos  Fiona F. Whitaker 《Sedimentology》2020,67(5):2282-2309

Authigenic clays are an important control on reservoir quality in lacustrine carbonates but remain challenging to predict. Lacustrine depositional systems respond to climatic variations in rainfall, surface runoff and groundwater input, and evaporation, and result in rapid and frequent changes in lake volume; this is expressed through changing water depth and shoreline position. In the upper portion of the Early Palaeocene Yacoraite Formation of the Salta Basin in Argentina, extensive lacustrine deposits were deposited during the sag phase of rifting. Prior high-resolution stratigraphic studies have suggested that climatic factors control microbial carbonate sequences within a ‘balanced fill’ lake, with variation in the lake level having a major influence on facies association changes. This study characterizes the evolution of facies and mineralogy within the Yacoraite Formation, focusing on the distribution of clay minerals, making a link between the high, medium and low-frequency sequence stratigraphic cycles. The low-frequency transgressive hemicycle of the upper portion of the Yacoraite Formation is comprised of abundant siliciclastic facies, suggesting a wetter period. Microbialites occurring in this interval are coarse-grained and agglutinated. Detrital clay minerals such as illite and chlorite and associated siliciclastic sediments were input to the lake during high-frequency transgressive periods. During high-frequency regressive hemicycles, sedimentation was dominated by carbonate facies with Ca-rich dolomite and the authigenic clays are comprised of chlorite/smectite mixed-layers. By contrast, the low frequency regressive hemicycle records fine-grained agglutinated microbialite with horizons of fibrous calcite, more stoichiometric dolomite, barite and authigenic magnesian smectite. This indicates elevated ion concentrations in the lake under intense evaporation during an arid period. Understanding the conditions that are favourable for formation and preservation of authigenic clays within the lacustrine environment can improve understanding of reservoir quality in comparable economically important deposits.  相似文献   

An extreme wave event in eastern Yucatán,Mexico: Evidence of a palaeotsunami event during the Mayan times     

Javier Lario  Chris Spencer  Teresa Bardají  Ángel Marchante  Victor H. Garduño-monroy  Jorge Macias  Sergio Ortega 《Sedimentology》2020,67(3):1481-1504

The Yucatán Peninsula, Mexico, has typically been considered a tectonically stable region with little significant seismic activity. The region though, is one that is regularly affected by hurricanes. A detailed survey of ca 100 km of the eastern Yucatán and Cozumel coast identified the presence of ridges containing individual boulders measuring >1 m in length. The boulder ridges reach 5 m in height and their origin is associated with extreme wave event activity. Previously modelled tsunami waves from known seismically active zones in the region (Muertos Thrust Belt and South Caribbean Deformed Belt) are not of sufficient scale in the area of the Yucatán Peninsula to have produced the boulder ridges recorded in this study. The occurrence of hurricanes in this region is more common, but two of the most destructive (Hurricane Gilbert 1988 and Hurricane Wilma 2005) produced coastal waves too small to have created the ridges recorded here. In this paper, a new tsunami model with a source area located on the Motagua/Swan Island Fault System has been generated that indicates a tsunami event may have caused the extreme wave events that resulted in the deposition of the boulder ridges.  相似文献   

A method for checking the quality of geographic metadata based on ISO 19157     

Manuel Antonio Ureña-Cámara  Javier Lacasta  Francisco Javier Ariza-López 《International journal of geographical information science》2019,33(1):1-27

With recent advances in remote sensing, location-based services and other related technologies, the production of geospatial information has exponentially increased in the last decades. Furthermore, to facilitate discovery and efficient access to such information, spatial data infrastructures were promoted and standardized, with a consideration that metadata are essential to describing data and services. Standardization bodies such as the International Organization for Standardization have defined well-known metadata models such as ISO 19115. However, current metadata assets exhibit heterogeneous quality levels because they are created by different producers with different perspectives. To address quality-related concerns, several initiatives attempted to define a common framework and test the suitability of metadata through automatic controls. Nevertheless, these controls are focused on interoperability by testing the format of metadata and a set of controlled elements. In this paper, we propose a methodology of testing the quality of metadata by considering aspects other than interoperability. The proposal adapts ISO 19157 to the metadata case and has been applied to a corpus of the Spanish Spatial Data Infrastructure. The results demonstrate that our quality check helps determine different types of errors for all metadata elements and can be almost completely automated to enhance the significance of metadata.  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation     

Raphael Di Carlo Silva dos Santos  João Carlos Ribeiro Cruz  Manuel de Jesus dos Santos Costa 《Geophysical Prospecting》2020,68(7):2046-2063

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.  相似文献   

Analysis of the trends in precipitation and precipitation concentration in some climatological stations of Mexico from 1960 to 2010     

Núñez-González  Gerardo 《Natural Hazards》2020,104(2):1747-1761

Natural Hazards - Analysis of precipitation trends as well as the observed trends in precipitation concentration can be useful tools for the identification of natural hazards. This study aimed to...  相似文献   

Estimating free parameters in 2D inversion: example of gravity inversion in a rifted basement     

João B.C. Silva  Darcicléa F. Santos  Daniele P. Monteiro 《Geophysical Prospecting》2020,68(3):1057-1071

We advance a principle directed to assigning numerical values to free parameters usually present in inversion methods. It may be formulated as: ‘Optimum estimates of free parameters in an inversion procedure must lead, in tests using synthetic data, to solutions whose geometrical expression reflects the main qualitative or semiquantitative geological characteristic of the study area.’ To this end, the interpreter should (i) specify a typical anomalous source geometry which incorporates the most relevant geological information for the study area, (ii) compute the corresponding gravity anomaly and (iii) invert the anomaly for the source geometry finding the numerical values of the free parameters that lead to a solution closest to the typical source. Application of the above methodology to synthetic and real data from the basement relief of a rift basin has asserted its efficacy.  相似文献   

Determination of Radiogenic 87Sr/86Sr and Stable δ88/86SrSRM987 Isotope Values of Thirteen Mineral,Vegetal and Animal Reference Materials by DS‐TIMS     

Jean‐Michel Brazier  Anne‐Dsire Schmitt  Eric Pelt  Damien Lemarchand  Sophie Gangloff  Tho Tacail  Vincent Balter 《Geostandards and Geoanalytical Research》2020,44(2):331-348

This work presents new ⁸⁷Sr/⁸⁶Sr and δ^88/86Sr_SRM987 isotopic values of thirteen mineral, vegetal and animal reference materials. Except for UB‐N, all our results are consistent with previously published data. Our results highlight intermediate precisions among the best presently published and a non‐significant systematic shift with the calculated δ^88/86Sr_SRM987 mean values for the three most analysed reference materials in the literature (i.e., IAPSO, BCR‐2 and JCp‐1). By comparison with the literature and between two distinct digestions, a significant bias of δ^88/86Sr_SRM987 values was highlighted for two reference materials (UB‐N and GS‐N). It has also been shown that digestion protocols (nitric and multi‐acid) have a moderate impact on the δ^88/86Sr_SRM987 isotopic values for the Jls‐1 reference materials suggesting that a nitric acid digestion of carbonate can be used without significant bias from partial digestion of non‐carbonate impurities. Different δ^88/86Sr_SRM987 values were measured after two independent Sr/matrix separations, according to the same protocol, for a fat‐rich organic reference material (BCR‐380R) and have been related to a potential post‐digestion heterogeneity. Finally, the δ^88/86Sr_SRM987 value differences measured between animal‐vegetal and between coral‐seawater reference materials agree with the previously published results, highlighting an Sr isotopic fractionation along the trophic chain and during carbonate precipitation.  相似文献   

Post‐Great Oxidation Event Orosirian–Statherian iron formations on the São Francisco craton: Geotectonic implications     

Carlos A. Rosire  Andrey Bekker  Vassily K. Rolim  Joo Orestes S. Santos 《Island Arc》2019,28(4)

The protocratonic core of the São Francisco craton assembled during the 2.1–2.0 Ga Transamazonian orogeny. Orosirian Fe‐rich sequences that extend from the northwestern border of the São Francisco protocraton (Colomi Group) to the southeast under the Espinhaço Belt (the < 1.99 Ga Serra da Serpentina Group) record the opening of an intracratonic basin with the episodically developed ferruginous waters prior to the initiation of the Espinhaço rift at 1.8 Ga. Ferruginous conditions developed again during deposition of the Canjica Iron Formation of the < 1.7 Ga Serra de São José Group in the Espinhaço rift (contemporaneously with felsic magmatism; Conceição do Mato Dentro Rhyolite and Borrachudos Granitic Suite) and extensive sandstones of the < (1666 ±32) Ma Itapanhoacanga and < (1683 ±11) Ma São João da Chapada Formations. In the upper São João da Chapada Formation, banded hematitic phyllite also records input of Fe‐rich fluids. The young age of these iron formations with respect to the conventionally accepted 1.88 Ga age for the youngest shallow‐marine Paleoproterozoic iron formations, the apparent absence of granular facies (granular iron formations), and yet shallow‐water (above fair‐weather base) depositional environment indicate that an unusual setting developed in a large basin after the Great Oxidation Event, in the aftermath of the Transamazonian orogeny. We propose that mantle plumes led to the opening of a previously unrecognized rift system, that could have caused the magmatism, supplied hydrothermal Fe and led to the opening of the Espinhaço, Pirapora, and Paramirim rifts, later obliterated by the Araçuaí orogenic belt during the Neoproterozoic to Early Paleozoic Brasiliano orogeny. The rift system did not develop into an open continental margin but probably evolved into a broad sag basin, stretching across the São Francisco and Congo cratons.  相似文献   

Runup uncertainty on planar beaches     

Torres-Freyermuth  Alec  Pintado-Pati&#;o  Jose Carlos  Pedrozo-Acu&#;a  Adri&#;n  Puleo  Jack A.  Baldock  Tom E. 《Ocean Dynamics》2019,69(11):1359-1371

Parameterization of wave runup is of paramount importance for an assessment of coastal hazards. Parametric models employ wave (e.g., H_s and L_p) and beach (i.e., β) parameters to estimate extreme runup (e.g., R_2%). Thus, recent studies have been devoted to improving such parameterizations by including additional information regarding wave forcing or beach morphology features. However, the effects of intra-wave dynamics, related to the random nature of the wave transformation process, on runup statistics have not been incorporated. This work employs a phase- and depth- resolving model, based on the Reynolds-averaged Navier-Stokes equations, to investigate different sources of variability associated with runup on planar beaches. The numerical model is validated with laboratory runup data. Subsequently, the role of both aleatory uncertainty and other known sources of runup variability (i.e., frequency spreading and bed roughness) is investigated. Model results show that aleatory uncertainty can be more important than the contributions from other sources of variability such as the bed roughness and frequency spreading. Ensemble results are employed to develop a new parametric model which uses the Hunt (J Waterw Port Coastal Ocean Eng 85:123–152, 1959) scaling parameter \(\beta \left (H_{s}L_{p}\right )^{1/2}\).

  相似文献