排序方式： 共有31条查询结果，搜索用时 234 毫秒
1.
Tomoki Oda Tomohiro Egusa Nobuhito Ohte Norifumi Hotta Nobuaki Tanaka Mark B. Green Masakazu Suzuki 《水文研究》2021,35(5):e14177
Understanding changes in evapotranspiration during forest regrowth is essential to predict changes of stream runoff and recovery after forest cutting. Canopy interception (Ic) is an important component of evapotranspiration, however Ic changes and the impact on stream runoff during regrowth after cutting remains unclear due to limited observations. The objective of this study was to examine the effects of Ic changes on long-term stream runoff in a regrowth Japanese cedar and Japanese cypress forest following clear-cutting. This study was conducted in two 1-ha paired headwater catchments at Fukuroyamasawa Experimental Watershed in Japan. The catchments were 100% covered by Japanese coniferous plantation forest, one of which was 100% clear-cut in 1999 when the forest was 70 years old. In the treated catchment, annual runoff increased by 301 mm/year (14% of precipitation) the year following clear-cutting, and remained 185 mm/year (7.9% of precipitation) higher in the young regrowth forest for 12–14 years compared to the estimated runoff assuming no clear-cutting. The Ic change was −358 mm/year (17% of precipitation) after cutting and was −168 mm/year (6.7% of precipitation) in the 12–14 years old regrowth forest compared to the observed Ic during the pre-cutting period. Stream runoff increased in all seasons, and the Ic change was the main fraction of evapotranspiration change in all seasons throughout the observation period. These results suggest that the change in Ic accounted for most of the runoff response following forest cutting and the subsequent runoff recovery in this coniferous forest. 相似文献
2.
Yukio Agatsuma Nobuyasu Nakabayashi Nobuaki Miura & Kazuya Taniguchi 《Marine Ecology》2005,26(2):100-109
To clarify the differences in the growth and gonad size of the sea urchin Hemicentrotus pulcherrimus among algal sere, the study was conducted in June and July, and September 1998 at three fucoid beds in Oga and at three algal turfs in Hachimori, Akita Prefecture in northern Japan. The most rapid growth was observed in a large perennial fucoid bed at the climax stage. Growth in a small perennial Chondrus ocellatus‐dominated bed in algal turfs in the seral stage was then high. The slowest growth was observed in the small perennial Dictyopteris divaricata‐ and Laurencia spp.‐dominated beds which are known to possess chemicals which act as feeding deterrents against the sea urchins. The gonad index (gonad wet weight × 100/body wet weight) at a fucoid bed was high where standing crops exceeded 3 kg·m?2. The gonad index in the Laurencia bed was lower than those at fucoid beds. These results suggest that growth and gonad production are affected by algal sere and differ among species of small perennial algae in the seral stage with or without chemical defense. 相似文献
3.
Diel patterns in the chlorophyll a specific absorption coefficient of surface picoplankton, a*pico (γ) (m2·[mg chlorophyll a]−1), were studied at 7 stations under daily cycle of in situ light condition in the western subarctic Pacific and Japan Sea. All the data were normalized by dividing the anomaly with daily averaged a*pico (γ). Opposite diel patterns were observed for the normalized a*pico (443) and a*pico (675) with maximum toward dawn or dusk and minimum toward midday at 4 stations under low-irradiance (LI) conditions and vice versa at 3 stations under high-irradiance (HI) conditions. The absorption efficiency factors at red absorption peak, Q
a (675), were determined by reconstruction with intracellular chlorophyll a concentration and cell diameter. The normalized Q
a (675) also showed diel pattern with maximum toward midday and minimum toward dawn or dusk under LI. The diel pattern in a*pico (675) and Q
a (675) were primarily caused by changes in intracellular chlorophyll a concentration due to photoadaptation under LI. The diel pattern in a*pico (443) was influenced by pigmentation, as recognized by blue to red ratio [a*pico (443)/a*pico (675)] under HI. This study proposed that the opposite diel pattern in a*pico (γ) might occur for a wide range of algal species. The results presented here have important consequences for the interpretation of diel variations in optical properties observed in the open ocean. 相似文献
4.
Norihiro Murayama Kou Arimura Nobuaki Okajima Junji Shibata 《International Journal of Mineral Processing》2009,93(2):110-114
The hydrothermal synthesis of AlPO4-n which is a functional material of aluminophosphate, was conducted from two kinds of aluminum dross discharged in an aluminum regeneration factory. The effect of structure-directing agent (SDA) on the formation behavior of AlPO4-n from aluminum dross, the suitable condition to obtain AlPO4-n efficiently, and the pore structure and gas adsorption property were investigated in this study.AlPO4-5 and AlPO4-34 are mainly formed from aluminum dross as a raw material, and it is possible to make AlPO4-5 successfully as a main product by adjusting the amount of triethylamine (TEA) as SDA. The gas adsorption amount with AlPO4-5 is the following order; ammonia > dipropylamine > benzene, and it is found that this order mainly corresponds with the polarity of molecule among them. 相似文献
5.
Abstract Magnetic measurements were carried out to investigate rock magnetic properties and paleomagnetic directions of late and middle Miocene sediments recovered from the land side of the Japan Trench during the Ocean Drilling Program Leg 186. Because the low coercive component in natural remanent magnetization (NRM) normalized by anhysteretic remanent magnetization shows that the drilling‐induced magnetization is severe in the sections obtained by the advanced hydraulic piston coring method, careful analyses of demagnetization of NRM using the ‘demagnetization plane’ were carried out to decompose the direction and intensity. Magnetostratigraphic correlation down to the upper Miocene, supplemented by biostratigraphic data, revealed that the sedimentation rates are characterized by drastic changes, with the early Pliocene having the highest rate. This high sedimentation rate is related to the subsidence of the southern deep‐sea terrace of the Japan Trench. 相似文献
6.
7.
Research on thermal shock resistance of mullite-bauxite-silicon carbide castable refractory 总被引：1，自引：0，他引：1
Nobuaki Chiyoda 《中国地球化学学报》2012,31(2):204-208
Effects of different silicon carbide contents on thermal shock resistance properties of mullite-bauxite castable refractory were analyzed respectively by taking the mullite,bauxite as main raw materials and taking calcium aluminate cement as a binding system.After 24 h curing in mould and another 24 h curing at 110℃ after demoulding,the samples were heated at 1000,1300 and 1500℃for 3 h in air,respectively.The bulk density,thermal expansion coefficient and thermal shock resistance were examined.The results showed that there was a great effect of content of SiC on bulk density,thermal expansion coefficient and thermal shock resistance of mullite-bauxite castable.Under the experimental conditions,the castable performed the best thermal shock resistance when w(SiC)=5%-10%. 相似文献
8.
Structural changes of synthetic opal by heat treatment 总被引：1，自引：0，他引：1
Akane Arasuna Masayuki Okuno Hiroki Okudera Tomoyuki Mizukami Shoji Arai Shin’ichi Katayama Mikio Koyano Nobuaki Ito 《Physics and Chemistry of Minerals》2013,40(9):747-755
The structural changes of synthetic opal by heat treatment up to 1,400 °C were investigated using scanning electron microscopy, X-ray diffraction, and Fourier transform infrared and Raman spectroscopies. The results indicate that the dehydration and condensation of silanol in opal are very important factors in the structural evolution of heat-treated synthetic opal. Synthetic opal releases water molecules and silanols by heat treatment up to 400 °C, where the dehydration of silanol may lead to the condensation of a new Si–O–Si network comprising a four-membered ring structure of SiO4 tetrahedra, even at 400 °C. Above 600 °C, water molecules are lost and the opal surface and internal silanol molecules are completely dehydrated by heat effect, and the medium-temperature range structure of opal may begin to thermally reconstruct to six-membered rings of SiO4 tetrahedra. Above 1,000 °C, the opal structure almost approaches that of silica glass with an average structure of six-membered rings. Above 1,200 °C, the opal changes to low-cristobalite; however, minor evidence of low-tridymite stacking was evident after heat treatment at 1,400 °C. 相似文献
9.
Wataru Kanda Mitsuru Utsugi Yoshikazu Tanaka Takeshi Hashimoto Ikuko Fujii Toshiaki Hasenaka Nobuaki Shigeno 《Journal of Volcanology and Geothermal Research》2010,189(1-2):158-171
Since August 2000, we have recorded the total intensity of the geomagnetic field at the summit area of Kuchi-erabu-jima volcano, where phreatic eruptions have repeatedly occurred. A time series analysis has shown that the variations in the geomagnetic field since 2001 have a strong relationship to an increase in volcanic activity. These variations indicate thermal demagnetization of the subsurface around the presently active crater. The demagnetization source for the early variations, until summer 2002, was estimated at about 200 m below sea level. For the variations since 2003, the source was modeled on the basis of the expansion of a uniformly magnetized ellipsoid. The modeling result showed that the source is located at 300 m above sea level beneath the crater. We carried out an audio-frequency magnetotelluric survey with the aim of obtaining a relation between the demagnetization source and the shallow structure of the volcano. A two-dimensional inversion applied to the data detected two good conductors, a shallow thin one which is restricted to a region around the summit area, while the other extends over the edifice at depths between 200 and 800 m. These conductors are regarded as clay-rich layers with low permeability, which were assumed to be generated through hydrothermal alteration. The demagnetization source for the early variations was possibly located at the lower part of the deep conductor and the source after 2003 lies between the two conductors, where groundwater is considered to be abundant. Based on these results, as well as on seismological, geodetic, and geochemical information, we propose a heating process of the Kuchi-erabu-jima volcano. In the initial stage, high-temperature volcanic gases supplied from the deep-seated magma remained temporarily at the level around the lower part of the less permeable deep conductor since the ascent path had not yet been established. Then, when the pathway developed as a result of repeated earthquakes, it became possible for a massive flux of volcanic gases to ascend through the conductor. The high temperature gases reached the aquifer located above the conductor and the heat was efficiently transported to the surrounding rocks through the groundwater. As a consequence, an abrupt increase of the gas flux and diffusion of the heat through the aquifer occurred and the high-temperature zone expanded. Since the high-temperature zone is located beneath another conductor, which acts as caprock, we assume that the energy of the phreatic explosion is accumulated there. 相似文献
10.
Multi-aquifer pumping tests, using a multi-screen pumping well and multi-level piezometers, were carried out for groundwater flow control in a large-scale excavation site in Tokyo, Japan. The site was underlain by multi-layered confined aquifers. In the tests, pumping was carried out using a multi-aquifer pumping well in which a screen depth was chosen arbitrarily. Changes in groundwater pressure heads in each aquifer were measured at each screen position of the multi-aquifer pumping well. Hydraulic conductivity (K) and specific storage (S s) of not only aquifers, but also for low permeability layers between the aquifers, were estimated using the Cooper-Jacob method, and calibrated by a finite element method (FEM) groundwater model. Four different cutoff wall lengths were assumed for final excavation depth, and correlations among wall length, pumping discharge and drawdown at the back of the cutoff wall were obtained from simulations using the K and S s parameters in the FEM model. Then, the most suitable wall length was selected based on the simulated correlations considering environmental condition, construction period and cost of the cutoff wall. 相似文献