UAV survey and numerical modeling of loess landslides: an example from Zaoling,southern Shanxi Province,China     

Ma  Siyuan  Wei  Jiangbo  Xu  Chong  Shao  Xiaoyi  Xu  Shiyang  Chai  Shaofeng  Cui  Yulong 《Natural Hazards》2020,104(1):1125-1140

Natural Hazards - This work attempted to reveal the geometric and kinematic characteristics of a loess landslide that occurred at Zaoling, southern Shanxi Province, China, on March 15, 2019. Based...  相似文献   

海底光缆检测技术综述     

汤钟  邵浩  张斌 《数字海洋与水下攻防》2020,3(6):499-503

据统计，我国近岸70%以上海底光缆失效是遭受了渔船拖网作业或抛锚等活动的破坏。维护损坏的海底光缆，首先需要快速准确地定位光缆损坏段，同时获取光缆在海床上的布设状态以及布设区域的海床地形特征、地貌与底质特征等信息。在实际工作中，复杂的海床环境为海底光缆的检修及维护带来巨大的技术困难。围绕海底光缆巡检的技术需求，系统分析了常规海底光缆检测技术的特点，基于国内外水下无人机器人的发展现状，为提高海底光缆的检测效率、识别准确率和智能化水平提供了技术支撑。  相似文献   

基于小波变换与神经网络的石羊河流域夏季地温预测模型研究   总被引：1，自引：1，他引：0  

贾东于  李开明  聂晓英  袁春霞  李清峰  高福元 《冰川冻土》2020,42(2):412-422

地温变化在气候反馈效应中起着重要作用， 理解地温及其与影响因素之间的时空关系对预测全球温度变化至关重要。利用1998 - 2017年石羊河流域的逐日常规气象观测资料， 采用小波分析结合BP（Back Propagation）神经网络构建了石羊河流域夏季地温预报模型， 结果表明： 日平均地温预测效果在不同站点均为最佳， 其中预测值和观测值的相关系数均大于0.87， 3 ℃以内的预测概率均大于84%。其中， 民勤地区地温预测效果最好， 预测值和观测值的相关系数达到0.91， 3 ℃以内的预测概率达到86%。日最高地温的预测值与观测值的相关系数高于0.8， 但误差平方和、 标准差较大。永昌地区日最高地温的模拟效果最好， 3 ℃以内的预测概率达到83%。日最低地温的预测与观测值的平均相关系数高于0.66， 3 ℃以内的预报概率高于83%， 但预测值略低。其中， 武威地区日最低地温的预测效果最好， 预测值与观测值的相关系数为0.72， 3 ℃以内的预测概率达到94%。研究成果可为有效弥补干旱、 半干旱区地温观测资料缺失和探讨其与局地气候的关系提供一些参考。  相似文献   

青岛台体应变短周期气压系数变化原因探讨     

岳龙  徐清风  臧艺博  李志强  刘云  李炜  孙忠礼 《大地测量与地球动力学》2020,40(7):765-770

青岛台体应变短周期(小于128 min)气压系数2018-01出现阶变，通过对观测系统、台站周边施工情况、监测环境等逐项现场核实，排除观测系统、周边施工的影响。利用离散小波变换和回归分析发现，钻孔水位的气压系数与体应变气压系数同步阶变，结合台站钻孔施工当天体应变钻孔水位变化、体应变趋势变化、其他相邻台站水位气压系数变化等数据认为，台站钻孔施工是导致体应变气压系数变化的原因，并定性分析其变化机理。  相似文献   

Measurement of local and volumetric deformation in geotechnical triaxial testing using 3D-digital image correlation and a subpixel edge detection algorithm     

Wang  Pengpeng  Guo  Xiaoxia  Sang  Yong  Shao  Longtan  Yin  Zenan  Wang  Yudi 《Acta Geotechnica》2020,15(10):2891-2904

Based on the three-dimensional digital image correlation (3D-DIC) technique, the stereovision system has been applied to the improved triaxial apparatus to obtain 3D full-field deformation of the specimen during triaxial testing. Through the calibration process, the 3D-DIC technique can obtain the accurate specimen’s spatial displacement deformation. Meanwhile, a subpixel edge detection algorithm has been combined with 3D-DIC technique to calculate the radial strain and the volume strain of the specimen directly. Furthermore, a series of consolidated drained and undrained triaxial tests were carried out on Hainan (China) sand specimens and measured by the conventional and the image measurement methods. Compared to the results measured by the conventional method, the image measurement technique can obtain the more experimental data, such as the 3D displacement field of the whole specimen, the local strain distribution, and so on. The measurement results also show the conventional method would be disturbed by the end constraints in triaxial tests so that the strength of the soil would be overestimated. Meanwhile, the middle of the specimen would be selected to calculate the stress–strain relationship without the influence of the end constraints in the proposed method. Based on the image measurement results, the proposed method has the potential to be used in geotechnical tests for exploring the soil’s progressive failure behaviors, inhomogeneous deformation and mechanical characteristics.

  相似文献   

The sulfurization recorded in tridymite in the monomict eucrite Northwest Africa 11591     

Li‐Lin Huang  Bing‐Kui Miao  Guo‐Zhu Chen  Hui‐Min Shao  Zi‐Yuan Ouyang 《Meteoritics & planetary science》2020,55(7):1441-1457

Some of the tridymite in the monomict Northwest Africa (NWA) 11591 eucrite are found to have sulfide‐rich replacement textures (SRTs) to varying degrees. The SRTs of tridymite in NWA 11591 are characterized by the distribution of loose porous regions with aggregates of quartz and minor troilite grains along the rims and fractures of the tridymite, and we propose a new mechanism for the origin of this texture. According to the volume and density conversion relationship, the quartz in the SRT of tridymite with a hackle fracture pattern was transformed from tridymite. We suggest that the primary tridymite grains are affected by the S‐rich vapors along the rims and fractures, leading to the transformation of tridymite into quartz. In addition, the S‐rich vapors reacted with Fe²⁺, which was transported from the relict tridymite and/or the adjacent Fe‐rich minerals, and/or the S‐rich vapors react with the exotic metallic Fe to form troilite grains. The sulfurization in NWA 11591 most likely occurred during the prolonged subsolidus thermal metamorphism in the shallow crust of Vesta and might be an open, relatively high temperature (>800 °C) process. Sulfur would be an important component of the metasomatic fluid on Vesta.  相似文献   

A micro-mechanics-based elastoplastic friction-damage model for brittle rocks and its application in deformation analysis of the left bank slope of Jinping I hydropower station     

Hu  Kun  Shao  Jian-Fu  Zhu  Qi-Zhi  Zhao  Lun-yang  Wang  Wei  Wang  Ru-Bing 《Acta Geotechnica》2020,15(12):3443-3460

Acta Geotechnica - This study develops a micro-mechanics-based elastoplastic damage model within the framework of irreversible thermodynamics. In the model, damage is related to growth of...  相似文献   

Super resolution for astronomical observations     

Zhan Li  Qingyu Peng  Bir Bhanu  Qingfeng Zhang  Haifeng He 《Astrophysics and Space Science》2018,363(5):92

In order to obtain detailed information from multiple telescope observations a general blind super-resolution (SR) reconstruction approach for astronomical images is proposed in this paper. A pixel-reliability-based SR reconstruction algorithm is described and implemented, where the developed process incorporates flat field correction, automatic star searching and centering, iterative star matching, and sub-pixel image registration. Images captured by the 1-m telescope at Yunnan Observatory are used to test the proposed technique. The results of these experiments indicate that, following SR reconstruction, faint stars are more distinct, bright stars have sharper profiles, and the backgrounds have higher details; thus these results benefit from the high-precision star centering and image registration provided by the developed method. Application of the proposed approach not only provides more opportunities for new discoveries from astronomical image sequences, but will also contribute to enhancing the capabilities of most spatial or ground-based telescopes.  相似文献   

Estimating the properties of weathered bedrock and pilerock interaction from the geological strength index     

Chun-mei Zhou  Wei Shao  Kun-long Yin  Zong-ji Yang 《山地科学学报》2018,15(8):1757-1776

The effect of variable rock mass properties on pile-rock interaction poses a great challenge to the design of stabilizing piles and numerical analysis of pile-rock interaction. The paper presents a novel method to estimate the properties of weathered bedrock, which can be applied to routine design of landslide-stabilizing piles for collivial landslides. The Ercengyan landslide located in the Three Gorges Reservoir, China, is the area of interest for this study. A geological investigation and triaxial tests were conducted to estimate the basic parameters, including Geological Strength Index(GSI), uniaxial compressive strength σ_(ci) and Hoek-Brown constant m_i of intact bedrock in the study area. Hoek-Brown criterion was used to estimate mechanical properties of the weathered rock, including elastic modulus E_m, cohesion c, friction angle Φ, and normal ultimate lateral resistance p_(max). A parametric study was performed to evaluate the effect of parameterizations of GSI, σ_(ci) and m_i on the bedrock properties and p-y curves. The estimated rock mass properties were used with PLAXIS 2D software to simulate pile-rock interaction. Effect of GSI on stress at the pile-rock interface and in the rock, pile bending moment, pile shear force, and p-y curve were analysed.  相似文献   

水准路线图自动绘制实现方法     

徐朋  姜庆峰  韩智超 《北京测绘》2018,32(1):66-69

本文以某工程为例,介绍了水准路线图绘制方法,并编制自动绘制软件。软件可根据提供的点位信息自动绘制标准图幅的路线图,并具有点位标定准确、图幅信息完整、界面整饰美观的特点,同时极大提高了作业效率。  相似文献