排序方式： 共有14条查询结果，搜索用时 31 毫秒
1.
Taherynia Mohammad Hossein Koopialipoor Mohammadreza Azizzadeh Abbas Fahimifar Ahmad Ghyasvand Soheil 《Geotechnical and Geological Engineering》2021,39(7):5119-5133
Geotechnical and Geological Engineering - Small variation in shear strength parameters results in remarkable changes in the safety factor (SF) of a rock slope. In this regard, rock mass strength of... 相似文献
2.
Stability of sandy slopes under seepage conditions 总被引：2，自引：1，他引：1
Stability against shallow mass sliding in saturated sandy slopes under seepage depends on the flow direction and hydraulic
gradient, particularly near the ground surface. Two modes of instability i.e., Coulomb sliding and liquefaction have been
studied and the critical flow directions discussed. The utility of the numerical approach in solving complex flow problems
with irregular boundaries and surface topography is demonstrated by means of two slope examples with different internal drainage
conditions. The numerical results for the seepage gradients at different points are compared with those predicted by the simple
expression derived in this study, and the corresponding effects on the stability are evaluated. 相似文献
3.
Lepidocrocite (γ‐FeOOH) nanoparticles were synthesized from iron(II) sulfate solution and characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform‐IR (FT‐IR), nitrogen adsorption, and point of zero charge pH (pHPZC) analyses. TEM, XRD, and FT‐IR analyses proved the synthesis of nano‐lepidocrocite. Surface area and pHPZC of the synthesized lepidocrocite were 68.1 m2 g?1 and 4.8, respectively. Utilization of the synthesized lepidocrocite in the adsorption of Lanacron brown S‐GL (LBS‐GL) from aqueous solutions was investigated, and the effect of lepidocrocite dosage, pH, temperature, and contact time on this process were optimized and modeled using response surface methodology approach. The lepidocrocite dosage of 0.015 g, pH 3.5, temperature of 38°C, and contact time of 100 min were determined as optimum adsorption conditions. Isotherm and kinetics of the adsorption process were analyzed at the optimum conditions. The equilibrium data were fitted well to the Langmuir isotherm model. The maximum monolayer adsorption capacity was 528.21 mg g?1. The adsorption process was described by the pseudo‐second‐order kinetic model. Furthermore, the effect of pH on the desorption of LBS‐GL was investigated. High LBS‐GL desorption efficiency was achieved at a high pH value. 相似文献
4.
Fatah Zarei Hamid Reza Esmaeili Keyvan Abbasi Golnaz Sayyadzadeh Soheil Eagderi Brian W. Coad 《Marine Ecology》2021,42(1):e12624
To evaluate the specific validity of the Caspian pipefish Syngnathus caspius, we used a comparative molecular species delimitation method on a COI barcode library of Syngnathus, as well as principles of genealogical concordance. Comparative species delimitation allowed us to delineate putative species without a priori assignment of individuals to nominal species, while genealogical concordance extended our species delimitation results to multiple genes, multiple codistributed species, and comparisons with biogeographic evidence. All species delimitation analyses including two topology‐based, one network‐based, and one distance‐based analysis showed genetically isolated lineages of pipefish in the Black and Caspian Sea, corresponding to S. abaster and S. caspius, respectively. Mean evolutionary divergence between the two lineages (0.029) was within the range separating species of Syngnathus (0.024–0.217). The interclade/intraclade ratio of variation was comparable to the operational criterion of divergence between clades greater or equal to 10 × the level within clades to recognize separate species. Our argument on taxonomic validity of S. caspius is also supported by the principles of genealogical concordance as a conceptual basis for recognition of biological species. As a second objective, using a limited number of S. caspius specimens from two semi‐confined water bodies along the Caspian Sea south coastal zone (i.e., Anzali Wetland in the west and Gorgan Bay in the east), we searched for a possible matrilineal structure. The retrieved phylogeographic pattern was characterized by a shallow genealogy and lineage distributions varied, most probably caused by low to modest contemporary gene flow between populations of S. caspius across the southern Caspian Sea that are linked tightly through history. 相似文献
5.
6.
Accurate estimation of stiffness loss is a challenging problem in structural health monitoring. In this study orthogonal wavelet decomposition is used for identifying the stiffness loss in a single degree of freedom spring-mass-damper system. The effects of excitation frequency on accuracy of damage detection is investigated. Results show that pseudo-alias effects caused by the orthogonal wavelet decomposition (OWD), affect damage detectability. It is demonstrated that theproposed approach is sunable for damage detection when the excitation frequency is relatively low. This study shows how a priori knowledge about the signal and ability to control the sampling frequency can enhance damage detectability. 相似文献
7.
Ramli Nazir Hossein Moayedi Rozaimi Bin Mohd Noor Soheil Ghareh 《Arabian Journal of Geosciences》2016,9(20):741
The attenuation equation for far field earthquake is important because the earthquake occurring in neighboring countries can be felt in Malaysia. In this study, a new attenuation was generated using the regression method. It was developed to calculate the peak ground acceleration (PGA) onsite (offshore platform). The database consisting of more than 150 PGAs from 9 events of earthquakes recorded by the Seismology Station in Malaysia was used to develop the relationship. In addition, attenuation relationships for subduction mechanisms from previous researchers are then compared with the newly generated ones in this research. The new attenuation equation was also validated and used to calculate the acceleration for far field earthquake in a case study of offshore platform at a Terengganu seaside. The result of PGA from the new generated attenuation relationship was in a good match with previous attenuation equations. 相似文献
8.
The current paper presents nonlinear dynamic analyses that simulate shaking table tests performed on a four‐column reinforced concrete frame described in a companion paper. The frame consists of two ductile and two nonductile columns interconnected by a stiff beam. In order to validate existing analytical models for nonductile concrete columns, a blind comparison of the test data and results of the analysis is performed. The analysis adequately captures the drift response and correctly detects collapse of the structure; however, strength degradation due to cover spalling is exaggerated in the analytical model. Refinement of the analysis by changing the concrete cover model results in an excellent agreement between the test data and analysis results at the initiation of shear failure and collapse of the frame. The experimental data are further compared with lumped‐plasticity nonlinear models used in engineering practice. The results suggest that the sudden strength degradation used in ASCE/SEI 41‐06 results in an exaggerated estimate of the displacement demands. It is also observed that ignoring the strength degradation, using an elastic‐perfectly‐plastic model, provides a good estimate of the displacement demands when strength degradation is not severe. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
9.
The pollution of underground and surface water streams is a tremendous environmental problem. Adsorption, in which activated carbon (AC) is used as an adsorbent, is one of efficient procedures to remove organic and inorganic pollutants from industrial wastewaters. Activated carbon fiber (ACF), a newly developed form of AC, has high adsorption rate and surface area and can be used for the treatment of industrial wastewaters. In this work, ACF was prepared by physicochemical activation method from kenaf and we studied its ability in the treatment of indigo‐containing wastewater produced from a dying factory. The filtered wastewater was treated via adsorption by ACF, and response surface experimental design method was used to study the effect of ACF dosage, contact time, temperature, and pH of the wastewater on the removal process. ACF dosage of 0.256 g, temperature of 12.5°C, pH 8.5, and contact time of 125 min were optimum treatment conditions. The adsorption process obeys pseudo‐second‐order kinetic and Freundlich isotherm models. 相似文献
10.
ABSTRACTIn many arid and semi-arid countries, wastewater irrigation is becoming a common practice in agriculture. In this study, the effect of long-term (40 years) wastewater irrigation on selected physical and hydraulic properties of soil in different parts of a landscape was investigated. The performance of some infiltration models, including Philip (Ph), Kostiakov (Kos), Kostiakov-Lewis (Kos-L), Horton (Ho), Huggins and Monke (Hug-M), and linear and nonlinear Smith-Parlange (S-P(L) and S-P(NL)), was compared. This study was performed in the Urmia region, Iran, where flooding wastewater irrigation has been practised for at least 40 years. Five paired sites, each of which contained a measurement location at the wastewater-irrigated (WWI) and adjacent control area were studied. Accuracy of the infiltration models was evaluated using several statistical criteria, including root mean square error (RMSE) and Akaike information criterion (AIC). The models were classified into groups using cluster analysis based on level of similarity in their performance. The cumulative water infiltration into soils after 1 h (I1h) was calculated using the selected most accurate models and introduced so as to use only one term to compare the infiltration behaviour of soils. Based on RMSE and AIC, the performance of the Ph, Ho, Kos and Kos-L models was considerably better than that of Hug-M, S-P(L) and S-P(NL). The ranking of the models in terms of their AIC values was: Kos-L > Ho > Kos > Ph > S-P(L) > Hug-M > S-P(NL). The models were classified into two distinct groups. The similarity among Ph, Ho, Kos and Kos-L models was more than 80% and for Hug-M, S-P(L), and S-P(NL) models, it was more than 79%. However, the similarity between these two groups of models was less than 58%.
Editor M.C. Acreman; Associate editor not assigned 相似文献