排序方式： 共有36条查询结果，搜索用时 15 毫秒
1.
J. Nava M. D. Suttle R. Spiess L. Folco J. Najorka C. Carli M. Massironi 《Meteoritics & planetary science》2020,55(1):164-183
TAM5.29 is an extraterrestrial dust grain, collected on the Transantarctic Mountains (TAM). Its mineralogy is dominated by an Fe‐rich matrix composed of platy fayalitic olivines and clasts of andradite surrounded by diopside‐jarosite mantles; chondrules are absent. TAM5.29 records a complex geological history with evidence of extensive thermal metamorphism in the presence of fluids at T < 300 °C. Alteration was terminated by an impact, resulting in shock melt veins and compaction‐orientated foliation of olivine. A second episode of alteration at lower temperatures (<100 °C) occurred postimpact and is either parent body or terrestrial in origin and resulted in the formation of iddingsite. The lack of chondrules is explained by random subsampling of the parent body, with TAM5.29 representing a matrix‐only fragment. On the basis of bulk chemical composition, mineralogy, and geological history TAM5.29 demonstrates affinities to the CVox group with a mineralogical assemblage in between the Allende‐like and Bali‐like subgroups (CVoxA and TAM5.29 are rich in andradite, magnetite, and FeNiS, but CVoxA lacks hydrated minerals, common in TAM5.29; conversely, CVoxB are rich in hydrated phyllosilicates but contain almost pure fayalite, not found in TAM5.29). In addition, TAM5.29 has a slightly different metasomatic history, in between the oxidized and reduced CV metamorphic grades while also recording higher oxidizing conditions as compared to the known CV chondrites. This study represents the third CV‐like cosmic dust particle, containing a unique composition, mineralogy, and fabric, demonstrating variation in the thermal metamorphic history of the CV parent body(‐ies). 相似文献
2.
Steven A. F. Smith Andrea Billi Giulio Di Toro Richard Spiess 《Pure and Applied Geophysics》2011,168(12):2365-2393
Earthquakes in central Italy, and in other areas worldwide, often nucleate within and rupture through carbonates in the upper crust. During individual earthquake ruptures, most fault displacement is thought to be accommodated by thin principal slip zones. This study presents detailed microstructural observations of the slip zones of the seismically active Tre Monti normal fault zone. All of the slip zones cut limestone, and geological constraints indicate exhumation from <2?km depth, where ambient temperatures are ?100°C. Scanning electron microscope observations suggest that the slip zones are composed of 100% calcite. The slip zones of secondary faults in the damage zone contain protocataclastic and cataclastic fabrics that are cross-cut by systematic fracture networks and stylolite dissolution surfaces. The slip zone of the principal fault has much more microstructural complexity, and contains a 2?C10?mm thick ultracataclasite that lies immediately beneath the principal slip surface. The ultracataclasite itself is internally zoned; 200?C300???m-thick ultracataclastic sub-layers record extreme localization of slip. Syn-tectonic calcite vein networks spatially associated with the sub-layers suggest fluid involvement in faulting. The ultracataclastic sub-layers preserve compelling microstructural evidence of fluidization, and also contain peculiar rounded grains consisting of a central (often angular) clast wrapped by a laminated outer cortex of ultra-fine-grained calcite. These ??clast-cortex grains?? closely resemble those produced during layer fluidization in other settings, including the basal detachments of catastrophic landslides and saturated high-velocity friction experiments on clay-bearing gouges. An overprinting foliation is present in the slip zone of the principal fault, and electron backscatter diffraction analyses indicate the presence of a weak calcite crystallographic preferred orientation (CPO) in the fine-grained matrix. The calcite c-axes are systematically inclined in the direction of shear. We suggest that fluidization of ultracataclastic sub-layers and formation of clast-cortex grains within the principal slip zone occurred at high strain rates during propagation of seismic ruptures whereas development of an overprinting CPO occurred by intergranular pressure solution during post-seismic creep. Further work is required to document the range of microstructures in localized slip zones that cross-cut different lithologies, and to compare natural slip zone microstructures with those produced in controlled deformation experiments. 相似文献
3.
Luisa Palamenghi Tilmann SchwenkVolkhard Spiess Hermann R. Kudrass 《Continental Shelf Research》2011,31(6):712-730
The deltas of large rivers have become the focus of many research studies due to their vulnerability in times of expected sea level rise. One major delta in peril is the Ganges-Brahmaputra Delta (Bangladesh) due to its low elevation and high subsidence rate. In this study, high-resolution seismic and sediment echosounder data of the subaqueous part of the delta are analyzed by an integrated seismo-acoustic stratigraphic approach.Transparent Units (TUs) are the most prominent, continuously traceable architectural elements within the sigmoidal clinoform. TUs consist of homogenized sediments and are interpreted to be formed by liquefaction flows generated by subduction-related earthquakes of the nearby plate-boundary. The uppermost TUs are related to the historical well known major earthquakes which occurred in 1762, 1897 and 1950. Using the TUs as time marks the mean annual storage rates for the intervals could be assessed. A direct comparison of echosounder data gathered in 1994, 1997 and 2006 is used as another method to estimate the last decade mean annual storage rate.In general, the averaged decadal to centennial mean annual storage rates in the foreset beds have significantly decreased within the last ∼300 years from 22% to 18% and down to 13.8% of the present total annual fluviatile suspension supply to the delta (109 t a−1). This decrease, however, is not evenly distributed along the foreset beds. In the western clinoform mean annual storage rates slightly decreased during the last ∼300 years, whereas in the eastern clinoform the mean annual storage rate of the last decade is one-third of the initial value in the late eighteenth century.The variation of clinoform slope angles generally coincides with the local accumulation rates but a variable degree of asymmetry gives some new insights in the future trend of the subaqueous delta development. The sink of sediment in the western clinoform depocentre landward of the inflection point, where shape changes from convex to concave, is producing an increase in concavity.The decline in monsoon precipitation over the last centuries is assumed to have significantly contributed to the decreased mean annual storage rate in the eastern clinoform where the convexity of the clinoform increases seaward of the inflection point. It is very likely that the whole depocentre of the fluvial sediment load is shifting toward the western subaqueous delta and to the Swatch of No Ground Canyon and, thereby, increasing the export to the deep-sea fan. 相似文献
4.
5.
Feng Ding Volkhard Spiess Ian R. MacDonald Markus Brüning Noemi Fekete Gerhard Bohrmann 《Marine and Petroleum Geology》2010,27(4):959-972
During German R/V Meteor M67/2 expedition to Campeche Knolls, southern Gulf of Mexico, a set of 2D high resolution seismic data was acquired to study the near-surface sediment structure and its relationship with hydrocarbon seepages in this salt province. The comprehensive survey covered 20 individual bathymetric highs or ridges and identified three principle structural types: Passive Type, Chaopopte Type, and Asymmetric Flap Type. The first type is the result of passive diapirism, whereas the latter two were initialized by a regional compressional event in the Miocene, but are later differently modified by salt tectonism. Chapopote Type structures appear as symmetrical domes, with uplifted coarse-grained Miocene sediments in their cores and rather thin syn-kinematic sediments covering the crests. Asymmetric Flap Type structures are also first folded as domes or ridges, but one flap later subsided together with salt evacuation, resulting in single uplifted monoclines. With the coarse-grained pre-kinematic sediments as reservoir units, both structural types can focus and accumulate hydrocarbons. The geometries of the structures suggest that hydrocarbons are accumulated in the center of the Chapopote Type structures and in the subsided flaps of the Asymmetric Flap Type structures. Hydrocarbon leakage from these thinly sealed reservoirs is regarded as the principle mechanism for the seepage in the study area, and accordingly the most seepage-prone positions are above these reservoirs. The seep locations suggested by analysis of sea-surface oil slick images of SAR satellite data are also examined in this study. These independently derived seep locations confirm the seepage-prone positions to be above the shallow buried reservoirs. This study suggest that the shallow sediment structures control the distribution of the hydrocarbon seeps of the north-western Campeche Knolls, although the hydrocarbons are sourced from the greater depth. 相似文献
6.
Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method. 相似文献
7.
Ken C. MacDonald Kim Kastens F. N. Spiess S. P. Miller 《Marine Geophysical Researches》1979,4(1):37-70
The Tamayo transform fault occurs at the north end of the East Pacific Rise where it enters the Gulf of California. The two deep-tow surveys reported here show that the transform fault zone changes significantly as a function of distance from the spreading center intersections. At site 1, near the intersection, one side of the fault is young and the fault zone is narrow and well-defined. Strike slip occurs in a zone approximately 1-km wide suggesting a correspondingly narrow zone of decoupling between the Pacific and North American plates. On the young side of the strike-slip zone, normal faults occur along shear zones which are 45°–50° oblique to the transform strike. They occur parallel to the short axis of the strain ellipse for transform fault strain here, i.e., perpendicular to the least compressive stress. The transform walls are formed by normal faulting as has been pointed out in previous detailed surveys. Here, however, the age contrast of 2.5 m.y. across the transform valley is apparent in the morphology of the normal fault scarps. While the scarps are steep and well-defined on the young side, the scarps on the older side have gradual 10°–30° slopes and appear to be primarily talus ramps. Apparently, the scarps have been tectonically eroded by continued strike slip activity after the initial stages of normal faulting. Thus, transform valleys should be quite asymmetric in cross-section where there is a significant age contrast and one side is less than approximately 0.5 m.y. old. Also, along older sections of the transform valley walls, normal faulting may not be at all obvious due to degradation of the scarps by tectonic erosion. This phenomenon makes the likelihood of transform faults providing windows into the oceanic crust most unlikely except in special cases.The picture of transform deformation is more complex at site 2 in the central portion of the fault where both sides of the fault are greater than 1 m.y. old. Here the transform valley is wider (25–30 km as opposed to 2–5 km). There is no clear simple zone of strike slip tectonics. In fact, the only clear evidence for deformation is the intrusion of magmatic or serpentinite diapirs through the sediments of the transform valley floor. The diapirs have deformed the turbidite layers flooring the valley and in one carefully studied case the turbidite sequence has been uplifted, perched atop the diapir. The pattern of deformation on this outcropping diapir shows radial and concentric fractures which can be modeled by a vertical intrusion circular in plan view. Magnetic studies limit the possible composition to basalt or serpentinite. A 60-km-long median ridge is also likely to be the product of intrusion along the transform fault. The survey at site 2 pointed out the importance of vertical tectonics in the transform valley floor and in particular the importance of diapiric intrusions of either basaltic or serpentinite composition.Based on initial boundary conditions and present tectonic elements in the Tamayo fault zone, a possible history of the mouth of the Gulf of California is outlined. The median ridge was emplaced starting approximately 0.8 m.y. ago by regional extension across the transform fault, the result of leaky transform faulting. The diapirs occur along a possible relay zone of extension midway along the fault which began approximately 0.15 m.y. ago. The extension in this case is parallel to the trend of the transform fault, is still occurring at present, and may evolve into a true spreading center.Contribution of the Scripps Institution of Oceanography, new series. 相似文献
8.
To study the time-varying influence of the Congo River and the Benguela Current on the deposition at the Angola Continental Margin, a high-resolution reflection seismic survey was carried out on the northern Congo Fan. Four seismostratigraphic units have been defined for the upper 800 m (1000 ms TWT) of the data. The units record different depositional environments, ranging from pre-establishment of the Congo River drainage system to the influence of the Benguela Current. An indication of a general change in the turbidite system is provided by a shift in channel distribution and a relocation of the depocentre of coarse material. The ascent of salt is recorded up to the Pliocene. Gas that has migrated out of Lower Cretaceous shales and that was produced from large quantities of organic matter in the younger sediments can be found on the flanks and on top of the salt domes. In a few places, this gas even ascends to the ocean floor along structural pathways through the topmost unit. 相似文献
9.
10.