The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献   

Seismic fragility functions for code compliant and non-compliant RC SMRF structures in Pakistan     

Naveed Ahmad  Asif Shahzad  Qaisar Ali  Muhammad Rizwan  Akhtar Naeem Khan 《Bulletin of Earthquake Engineering》2018,16(10):4675-4703

Fragility functions are derived for low-rise code compliant & non-compliant special moment resisting frames (SMRFs). Non-compliant SMRFs those built in low strength concrete and lacking confining ties in joint panel zones, commonly found in developing countries. Shake table tests were performed on single-storey and two-storey 1:3 reduced scale representative frames to understand the damage mechanism and develop deformation-based damage scale. The non-compliant SMRF experienced column flexure cracking, longitudinal bar-slip in beam and observed with cover concrete spalling from the joint panels. The code compliant SMRF experienced flexure cracks in beam/column, and experienced joint cracking under extreme shaking. Numerical modeling technique is developed for inelastic modeling of reinforced concrete frame with beam bar-slip and joint damageability using SeismoStruct. Natural accelerograms were used to analyze the considered frames through incremental dynamic analyses in SeismoStruct. A probabilistic based approach was used to derive fragility functions for the considered frames. An example case study is presented for damageability evaluation of structures for earthquakes of various return periods (43, 72, 475, 2475 years).  相似文献   

Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme     

Zekri  Hamid  Cohen  David R.  Mokhtari  Ahmad Reza  Esmaeili  Abbas 《Natural Resources Research》2019,28(3):849-865

Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or...  相似文献   

Heavy metal pollution and human health risk assessment for exposure to surface soil of mining area: a comprehensive study     

Abouian Jahromi  Mohammad  Jamshidi-Zanjani  Ahmad  Khodadadi Darban  Ahmad 《Environmental Earth Sciences》2020,79(14):1-11

Climate change projections indicate an increase in intense rainfall events with consequent river flooding, which could lead to devastating natural disaster  相似文献   

Prediction of copper content in waste dump of Sarcheshmeh copper mine using visible and near-infrared reflectance spectroscopy     

Khosravi  Vahid  Ardejani  Faramarz Doulati  Aryafar  Ahmad  Yousefi  Saeed  Karami  Shawgar 《Environmental Earth Sciences》2020,79(7):1-16

The pore structure characteristics of soil are closely related to soil engineering properties. For saline soil distributed in seasonally frozen areas, existing studies have focused on the influence of freeze–thaw cycles on pore structure, while the influence of soluble salt in the soil is not well understood. This study aims to explore the influence of salt content and salt type on the pore structure of freeze-thawed soil. Soil samples with different salt contents (0–2%) and types (bicarbonate salt and sulfate salt) were subjected to 10 freeze–thaw tests, and their pore size distributions (PSDs) were obtained by mercury intrusion porosimetry tests. In addition, the PSDs were quantitatively analyzed by fractal theory. For both salts, the PSDs of the tested soil samples were bimodal after the freeze–thaw cycles, and the porosity of saline soil samples increased with increasing salt content overall. However, the contents of various types of pores in soil samples with two salt types were quite different. The variation in bicarbonate salt content mainly affected the mesopore and macropore contents in the soil samples, and their change trends were opposite to each other. For soil samples with sulfate salt, the porosity and macropore content increased significantly when the salt content exceeded 1%. In addition, the pore structures in saline soil presented fractal characteristics after the freeze–thaw cycles, and the fractal dimension was positively correlated with macropore content. This study may provide references for understanding the engineering properties of saline soil in seasonally frozen areas at the microscale.  相似文献   

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran     

Hamid Alipour  Ahmad Jalalian  Naser Honarjoo  Norair Tommanian  Fereidoon Sarmadian 《洁净——土壤、空气、水》2019,47(10)

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.  相似文献   

Socio-political and ecological stresses on traditional pastoral systems: A review     

Muhammad  Khurshid  Mohammad  Nafees  Abdullah  Khan  Mehmet  Somuncu  Ashfaq  Ahmad Khan  Wajid  Rashid 《地理学报(英文版)》2019,29(10):1758-1770

Journal of Geographical Sciences - Pastoralism is a viable socio-economic system-shaped by landless and agro-pastoral communities in many pastoral regions of the world. This system is mainly based...  相似文献   

Free Vibration Analysis of Symmetrically Laminated Composite Plates on Elastic Foundation and Coupled with Stationary Fluid     

Arash Shahbaztabar  Ahmad Rahbar-Ranji 《中国海洋工程》2018,32(3):266-277

Free vibration analysis of symmetrically laminated composite plates resting on Pasternak elastic support and coupled with an ideal, incompressible and inviscid fluid is the objective of the present work. The fluid domain is considered to be infinite in the length direction but bounded in the depth and width directions. In order to derive the eigenvalue equation, Rayleigh-Ritz method is applied for the fluid-plate-foundation system. The efficiency of the method is proved by comparison studies with those reported in the open literature. At the end, parametric studies are carried out to examine the impact of different parameters on the natural frequencies.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

Application of Artificial Intelligence to Estimate Oil Flow Rate in Gas-Lift Wells     

Khan  Mohammad Rasheed  Tariq  Zeeshan  Abdulraheem  Abdulazeez 《Natural Resources Research》2020,29(6):4017-4029

Natural Resources Research - Optimization and monitoring schemes for oil well and reservoir system require accurate estimation of production rate. Real-time monitoring is conducted typically using...  相似文献