Thin-section analysis as a tool to aid identification of palaeoearthquakes on the “slow”, active Geleen Fault, Roer Valley Graben     

Kris Vanneste  Florias Mees  Koen Verbeeck   《Tectonophysics》2008,453(1-4):94

We analyzed thin sections from two palaeoseismic trenches across the low-slip-rate Geleen Fault in the Belgian Maas River valley to help identifying the most recent large palaeoearthquake on this fault segment. In the first trench we sampled silty sediment below and above a prehistoric stone pavement that was supposedly at or near the surface at the time of the event, and subsequently thrown down. The samples below show a well-developed in situ argillic Bt soil horizon in parent sediment containing remnants of stratification, whereas the sediment above is a structureless colluvium reworked at least partly from Bt-horizon material. Below the stone pavement, we also found evidence of contorted stratification, which is in agreement with macroscopic observations of both the sediment and the stone pavement itself, and which is attributed to co-seismic soft-sediment deformation. In the second trench, we sampled a sequence of vaguely discernible soil horizons in the hanging-wall, interpreted as a buried soil profile (Bt, E, and possibly A horizons), overlain by a featureless deposit. Thin-section analysis supports the colluvial nature of the latter, and also provides evidence that both the base of this layer and the top of the poorly developed A horizon below have occupied a shallow position in a soil profile. A sample from the same depth in the footwall is composed of very different material. Instead of colluvium, we find patches of Bt soil, most likely representing the same pedogenic level as the in situ Bt horizon at larger depth in the hanging-wall, but displaced and subsequently degraded. Furthermore, thin sections confirm that vertical structures cutting this Bt horizon are sand dykes. These dykes could be traced macroscopically upward to the base of the colluvium. In both trenches, we have thus identified a stratigraphic boundary in the hanging-wall, close to the surface, separating an in situ soil below from colluvium above. We interpret this limit and the overlying colluvium as the event horizon and the colluvial wedge, respectively, of a surface-rupturing palaeoearthquake. In addition, in both cases we found evidence of soft-sediment deformation (related to liquefaction) contemporaneous with the event within the stratigraphic resolution.  相似文献   

Structural elements of the Makran region, Oman sea and their potential relevance to tsunamigenisis     

Mohammad Mokhtari  Iraj Abdollahie Fard  Khaled Hessami 《Natural Hazards》2008,47(2):185-199

The character of convergence along the Arabian–Iranian plate boundary changes radically eastward from the Zagros ranges to the Makran region. This appears to be due to collision of continental crust in the west, in contrast to subduction of oceanic crust in the east. The Makran subduction zone with a length of about 900 km display progressively older and highly deformed sedimentary units northward from the coast, together with an increase in elevation of the ranges. North of the Makran ranges are large subsiding basins, flanked to the north by active volcanoes. Based on 2D seismic reflection data obtained in this study, the main structural provinces and elements in the Gulf of Oman include: (i) the structural elements on the northeastern part of the Arabian Plate and, (ii) the Offshore Makran Accretionary Complex. Based on detailed analysis of these data on the northeastern part of the Arabian Plate five structural provinces and elements—the Musendam High, the Musendam Peneplain, the Musendam Slope, the Dibba Zone, and the Abyssal Plain have been identified. Further, the Offshore Makran Accretionary Complex shown is to consist Accretionary Prism and the For-Arc Basin, while the Accretionary Prism has been subdivided into the Accretionary Wedge and the Accreted/Colored Mélange. Lastly, it is important to note that the Makran subduction zone lacks the trench. The identification of these structural elements should help in better understanding the seismicity of the Makran region in general and the subduction zone in particular. The 1945 magnitude 8.1 tsunamigenic earthquake of the Makran and some other historical events are illustrative of the coastal region’s vulnerability to future tsunami in the area, and such data should be of value to the developing Indian Ocean Tsunami Warning System.  相似文献   

Deformation Patterns of an Accretionary Wedge in the Transition Zone from Subduction to Collision Offshore Southwestern Taiwan   总被引：1，自引：0，他引：1  

Char-Shine Liu  Benoit Deffontaines  Chia-Yu Lu  Serge Lallemand 《Marine Geophysical Researches》2004,25(1-2):123-137

Swath bathymetry data and seismic reflection profiles have been used to investigate details of the deformation pattern in the area offshore southwestern Taiwan where the Luzon subduction complex encroaches on the passive Chinese continental margin. Distinctive fold-and-thrust structures of the convergent zone and horst-and-graben structures of the passive margin are separated by a deformation front that extends NNW-ward from the eastern edge of the Manila Trench to the foot of the continental slope. This deformation front gradually turns into a NNE–SSW trending direction across the continental slope and the Kaoping Shelf, and connects to the frontal thrusts of the mountain belt on land Taiwan. However, the complex Penghu submarine canyon system blurs the exact location of the deformation front and nature of many morphotectonic features offshore SW Taiwan. We suggest that the deformation front offshore SW Taiwan does not appear as a simple structural line, but is characterized by a series of N–S trending folds and thrusts that terminate sequentially in an en-echelon pattern across the passive Chinese continental slope. A number of NE–SW trending lineaments cut across the fold-and-thrust structures of the frontal accretionary wedge and exhibit prominent dextral displacement indicative of the lateral expulsion of SW Taiwan. One of the prominent lineaments, named the Yung-An lineament, forms the southeastern boundary of the upper part of the Penghu submarine canyon, and has conspicuous influence over the drainage pattern of the canyon  相似文献   

Environmental characteristics of the Mandovi-Zuari estuarine system in Goa   总被引：1，自引：0，他引：1  

S.Z. Qasim  R. Sen Gupta 《Estuarine, Coastal and Shelf Science》1981,13(5):557-578

  相似文献   

Preserved paleo-oceanic plateaus in accretionary complexes: Implications for the contributions of the Pacific superplume to global environmental change   总被引：1，自引：1，他引：0  

Atsushi Utsunomiya  Norihito Suzuki  Tsutomu Ota 《Gondwana Research》2008,14(1-2):115

We have reinvestigated the mid-Cretaceous plume pulse in relation to paleo-oceanic plateaus from accretionary prisms in the circum-Pacific region, and we have correlated the Pacific superplume activity with catastrophic environmental changes since the Neoproterozoic. The Paleo-oceanic plateaus are dated at 75–150 Ma; they were generated in the Pacific superplume region and are preserved in accretionary prisms. The volcanic edifice composed of both modern and paleo-oceanic plateaus is up to 10.7 × 10⁶ km² in area and 19.1 × 10⁷ km³ in volume. The degassing rate of CO₂ (0.82 − 1.1 × 10¹⁸ mol/m.y.) suggests a significant impact on Cretaceous global warming. The synchronous occurrence of paleo-oceanic plateaus in accretionary complexes indicates that Pacific superplume pulse activities roughly coincided at the Permo-Triassic boundary and the Vendian–Cambrian boundary interval. The CO₂ expelled by the Pacific superplume probably contributed to environmental catastrophes. The initiation of the Pacific superplume contributed to the snowball Earth event near the Vendian–Cambrian boundary; this was one of the most dramatic events in Earth's history. The scale of the Pacific superplume activity roughly corresponds to the scale of drastic environmental change.  相似文献   

敦煌北部岩浆-变质杂岩构造环境初步探讨:对中亚造山带南缘扩展方式的启示     

石梦岩  程南南  侯泉林  吴春明  闫全人  张国成  张谦  王浩 《岩石学报》2021,37(12):3673-3686

中亚造山带南缘如何向南扩展，对深入理解增生型造山作用和大陆地壳生长机制以及中亚构造域与特提斯构造域的衔接具有重要科学意义。作为中亚造山带南缘的关键构造单元，敦煌构造带大地构造属性长期备受关注且颇有争议。传统观点认为敦煌构造带是古亚洲洋南侧的前寒武纪稳定大陆地块，以刚性块体的形式参与了中亚造山带南缘的最终拼贴过程。然而，近年来研究认为敦煌构造带卷入了古亚洲洋南部的俯冲增生造山过程，属于中亚造山带南缘的增生系统。显然，这一争议限制了对中亚造山带南缘向南扩展方式及增生造山过程的理解。敦煌北部三危山地区出露一套古生代岩浆-变质杂岩，是解开这一争论的关键。本文综合前人研究基础及新的资料，归纳了这套岩浆-变质杂岩的野外岩石-构造组合、地球化学和年代学等方面特征：该岩浆-变质杂岩整体显示"二元结构"特征，即较老的增生杂岩为基底，弧岩浆岩侵入或不整合覆盖其上；其中岩浆岩属于中钾-高钾钙碱性系列中酸性岩浆岩，富集大离子亲石元素（LILE）和轻稀土元素（LREE），亏损高场强元素（HFSE），与典型的弧岩浆岩类似，并且微量元素组成特征反映中酸性岩浆的源区与俯冲沉积物部分熔融有关；岩浆作用大致归为510Ma、460~410Ma和370~360Ma三期。岩浆岩中结晶锆石不一致的ε_Hf（t）值（既有正值，又有负值）以及继承锆石的存在表明，岩浆源区既有古老地壳物质的加入，也有新生地壳物质的形成。以上这些特征与发育在增生杂岩之上的增生弧十分类似，因此本文提出敦煌北部岩浆-变质杂岩的属性为古生代增生弧，并且该增生弧与其南部的红柳峡俯冲增生杂岩共同勾勒出敦煌构造带自北向南增生弧-增生杂岩的基本构造格架，即敦煌构造带的大地构造属性实为造山带而非稳定地块。结合区域地质背景及敦煌地区与北山地区古生代至早中生代构造-热事件的对应关系，认为敦煌造山带属于中亚造山带中段南缘的增生系统，中亚造山带中段以增生弧-增生杂岩的形式向南扩展至敦煌地区。  相似文献   

A north-south section across the Queyras Schistes lustrés (Piedmont zone, Western Alps): Syn-collision refolding of a subduction wedge     

Pierre Tricart  Stephane Schwartz 《Eclogae Geologicae Helvetiae》2006,99(3):429-442

  相似文献   

非海相沉积层序的成因和构型特征   总被引：4，自引：2，他引：4  

李继红  魏魁生  厉大亮  张守鹏  郝运轻  邱以刚 《沉积学报》2002,20(3):409-415

根据东部盆地的地质、地球物理特征,初步对非海相层序地层学应用研究进行了总结.非海相沉积层序的形成要素,既有外旋回、又有自旋回,构造和气候因素很重要,强调了环境因素.沉积基准面在海上为海平面,在陆上为潜水面、湖平面、河流平衡剖面.相对基准面的周期性变化引起了可容纳空间的周期性变化,并由之形成了一系列旋回式的层序.大多数情况下内陆基准面的变化不受海平面变化的控制,在全球最大海泛期有某种联系.湖盆小而沉积速率高,形成层序的频率高于海相.以沾化凹陷为依据,提出了5种层序构型特征:冲积-河湖型,(半)盐湖-淡水湖泊过渡型,海流-深湖型,半深湖-缓坡型,河流-冲积平原型.在盆地主要发育期,断阶式坡折对沉积体系有明显的控制作用.除低水位扇外,低水位楔是构成隐蔽圈闭或复合圈闭的有利场所。  相似文献   

Recycling in the Puerto Rican mantle wedge, Greater Antilles Island Arc     

Wayne T. Jolly  Edward G. Lidiak  Alan P. Dickin  Tsai-Way Wu 《Island Arc》2002,11(1):10-24

Abstract The initial volcanic phase of Cretaceous island arc strata in central Puerto Rico, at the eastern end of the extinct Greater Antilles Arc, comprises a 6‐km thick pile of lava and volcanic breccia (Río Majada Group). Preserved within the sequence is a conspicuous shift in absolute abundances of the more incompatible elements, including Th, Nb, and the light rare earth elements (LREE: La, Ce, Pr and Nd). The compositional shift is marked by a decrease in La/Sm from averages of 2.11 in the lowest third of the pile (Formation A) to 1.48 at the top (Formation C), and by a distinctive flattening of LREE segments of chondrite‐normalized REE patterns. i⁸⁷Sr/⁸⁶Sr and ?_Nd average about 0.7035 and 8.2, respectively, in early Formation A basalts. These ranges normally overlap samples from later Formations B and C. Isotope compositions of the latter group are more variable, however, and several samples are considerably more radiogenic than Formation A basalts, such that i⁸⁷Sr/⁸⁶Sr averages almost 0.7042 while ?_Nd‐values decrease to 7.5 in Formation B and C basalts. Theoretical models of non‐modal melting processes in both amphibole peridotite and spinel lherzolite sources provide insight into the origin of depleted Th, Nb, and LREE abundances in Puerto Rican basalts. Low Nb concentrations less than normal mid‐oceanic ridge basalts in Formation A basalts indicate the wedge was slightly depleted by low‐volume decompression fusion due to induced convection in the back‐arc region prior to entry of the source into the arc melting zone. However, depleted patterns in Formation C basalts cannot be generated by relatively greater degrees of decompression fusion in the back‐arc, because addition of the La‐enriched slab‐derived component to more depleted source material invariably produces elevated rather than decreased La/Sm. Refluxing of Formation A harzburgitic residua is similarly precluded. In contrast, the observed patterns are readily reproduced by multistage melting models involving hybridized sources containing normal Formation A lherzolite source material blended with recycled, unrefluxed harzburgite residua. Successful models require hybrid sources containing large volumes of recycled harzburgite (up to 50%) during generation of Formation C basalts. Slightly elevated radiometric Sr and Nd isotopes in a few flows from Formation C are attributed to partial refluxing of the hybrid sources within the wedge.  相似文献   

俯冲-增生型造山带增生楔流体研究进展   总被引：3，自引：0，他引：3  

闫臻  王宗起  阎全人  王涛 《地质科技情报》2003,22(1):7-12

俯冲－增生型造山带弧前增生楔流体的特点为：盐度低、氯化物含量异常低，并含有丰富的CO2和CH4。流体以扩散式或沿断层带渠道式活动；泥火山、张裂隙充填脉、碳酸盐壳、深海生物群是流体活动的直接体现；流体活动影响着增生楔的内部结构和构造样式；增生楔中流体活动特征的研究对研究造山带的地质演化及矿床成因具有重要意义。  相似文献