Multiple longshore sand bars in the upper Chesapeake Bay     

Thomas J. Dolan  Robert G. Dean 《Estuarine, Coastal and Shelf Science》1985,21(5):727-743

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.  相似文献   

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry     

Jacques Desrues  Gioacchino Viggiani 《国际地质力学数值与分析法杂志》2004,28(4):279-321

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd  相似文献   

The characteristics of Asian dust events in Northeast Asia during the springtime from 1993 to 2004   总被引：3，自引：1，他引：2  

Ju-Yeon Lim  Youngsin Chun   《Global and Planetary Change》2006,52(1-4):231

The characteristics of Asian dust events that occurred in Northeast Asia during the springtime from 1993 to 2004 are investigated using 3-hourly SYNOP reports (World Meteorological Organization). Occurrences of blowing sand and dust storm are low in 1997 and 1999, but have increased rapidly since 2000. The maximum occurrence was recorded in 2002. Wind velocity of 6.5 m s^− 1 as a threshold wind velocity is not so exactly consistent with the occurrence of blowing sand. However, wind velocity of 14 m s^− 1 as a strong wind causing dust storm had similar tendency to those of dust storm and Dust Storm Index.Source regions of Asian dust are divided into three regions (A: dry arid, B: semi-arid, and C: cultivated), based upon the occurrence of blowing sand and dust storm. Eight meteorological stations are selected in three regions, which have frequent occurrences of blowing sand. Source regions of Asian dust that affect the Korean peninsula are gradually extending eastward. Positive anomalies of NDVI occurred in 1994, 1995, and 1998 when temperature was high and precipitation was heavy. However, the frequent occurrence of the dust phenomena is not always consistent with lots of vegetation, high temperature, and much precipitation in this study.  相似文献   

The Latest Research Progress on El Nino     

CHEN Dianyou  WANG Ruiting  WANG Xudong 《世界地质(英文版)》2002,5(1)

Cold water in the deep Pacific can be drawn up to the surface (or west warm water drifts eastwards ) because strong tide increases the mixing of seawater both in vertical and horizontal. In this way greenhouse effect is decreased or increased by means of absorbing (or releasing) CO2. Therefore, La Nina cold event (or El Nino warm event) may occur,which is caused by wanning - up or cooling - down air above the ocean. Volcanic action at sea bottom is also controlled by strong tide.  相似文献   

ELECTROCHEMICAL CORROSION BEHAVIOR OF STEEL IN THE JUNCTURE AREA OF SEA CLAY AND SAND     

张经磊  侯保荣  郭公玉  杨芳英  谢肖勃 《中国海洋湖沼学报》1993,11(2):171-175

Corrosion behavior of steel in the juncture area of sea clay and sand was studied. The results show that galvanic corrosion occurred between steel samples buried in sea clay and sand, and that the polarity of the galvanic cell reversed after some testing later. The cause of reversing of polarity is discussed.  相似文献   

石英砂扫描电镜在漓江“泥砾”成因中的应用     

吴枝坦  王壬林  姚若飞 《南方国土资源》1992,(4)

本文根据扫描电镜对从漓江河谷钻孔中的泥砾层取得的481粒石英砂表面形态特证研究结果:石英砂多数颗粒保持棱角状外形并遭受不同程度的磨蚀,具阶状贝壳断口,平直或弧形刮削面和多向擦痕,沿解理面破碎呈“V”字形沟和撞击碟形坑,以及微溶蚀孔、隙、蜂窝状溶孔群和SiO_2再沉积等表面形态结构特征。认为它是在第四纪古地理湿热气候条件下泥石流沉积的产物,物源可能来自境内或周边的泥盆系砂岩和境外的花岗岩。  相似文献   

MONITORING THE DIFFUSION OF SUSPENDED SEDIMENTS AND STABILITY OF TIDAL RADIAL SAND RIDGES AREA USING MULTI-SATELLITE REMOTE SENSING DATA     

黄海军  何宜军 《中国海洋湖沼学报》2001,19(4):361-367

Nine Landsat TM tapes and images and MSS images, 10 NOAA tapes and images and 1 SAR image from 1973 to 1997 were used to analyse the diffusion of suspended sediments and the change of tidal radial sand ridges in the northern part of the Changjiang River delta, the South Yellow Sea. The results showed that the diffusion of suspended sediments was controlled by the tide, net current, and submarine topography in this area. The distribution of suspended sediments had close relationship with thesubmarine topography. The old Huanghe River delta and the Changjiang River comprise the main sediment supply for the formation of radial sand ridges, whose evolution can be divided into three stages since the Huangbe River changed its course and flowed northward into the Bohai Sea.  相似文献   

Experimental study on the deterioration and natural remediation of the Ariake Sea tidal mud caused by the sea laver treatment acid practice and the upward seepage of pore water liquid     

Yan-Jun Du  Song-Yu Liu  Shigenori Hayashi 《Environmental Geology》2008,55(4):889-900

This study presents a laboratory study of the following two aspects: (1) the influence of sea laver treatment acid on the geoenvironmental properties of Ariake Sea tidal mud, and (2) the natural remediation effect on the sea laver treatment acid contaminated Ariake Sea tidal mud caused by the upward seepage of pore water liquid in the mud. Firstly, the mechanisms of the transport of sea laver treatment acid in the Ariake Sea tidal mud and the generation mechanisms of the upward seepage flow in the Ariake Sea tidal mud are discussed. Secondly, a series of one-dimensional laboratory infiltration tests were carried out to investigate the deterioration of the Ariake Sea tidal mud caused by the sea laver acid treatment practice. Test results reveal that the acid treatment practice caused considerable change in the geochemical properties of the mud in terms of increase in sulfide content and decrease in pH value. After the treatment by the sea laver treatment acid, the sulfide content of the mud even exceeded the safe limit value for the benthos, which represents undesirable living condition for benthos. Thirdly, series of laboratory fresh seawater infiltration tests for the deteriorated Iida site mud were conducted to illustrate this natural remediation efficiency. It is found that with the infiltration of the fresh seawater, the sulfide content of the Iida site mud was considerably reduced and pH value increased to an acceptable range for benthos living in the tidal flat mud. With the increase in the infiltration time and the hydraulic gradient, the remediation efficiency could be increased.  相似文献   

Global Correlations of Ocean Ridge Basalt Chemistry with Axial Depth: a New Perspective   总被引：4，自引：0，他引：4  

Niu  Yaoling; O'Hara  Michael J. 《Journal of Petrology》2008,49(4):633-664

The petrological parameters Na₈ and Fe₈, which are Na₂O andFeO contents in mid-ocean ridge basalt (MORB) melts correctedfor fractionation effects to MgO = 8 wt%, have been widely usedas indicators of the extent and pressure of mantle melting beneathocean ridges. We find that these parameters are unreliable.Fe₈ is used to compute the mantle solidus depth (P_o) and temperature(T_o), and it is the values and range of Fe₈ that have led tothe notion that mantle potential temperature variation of T_P= 250 K is required to explain the global ocean ridge systematics.This interpreted T_P = 250 K range applies to ocean ridges awayfrom ‘hotspots’. We find no convincing evidencethat calculated values for P_o, T_o, and T_P using Fe₈ have anysignificance. We correct for fractionation effect to Mg^# = 0·72,which reveals mostly signals of mantle processes because meltswith Mg^# = 0·72 are in equilibrium with mantle olivineof Fo_89·6 (vs evolved olivine of Fo_{88·1–79·6}in equilibrium with melts of Fe₈). To reveal first-order MORBchemical systematics as a function of ridge axial depth, weaverage out possible effects of spreading rate variation, local-scalemantle source heterogeneity, melting region geometry variation,and dynamic topography on regional and segment scales by usingactual sample depths, regardless of geographical location, withineach of 22 ridge depth intervals of 250 m on a global scale.These depth-interval averages give Fe₇₂ = 7·5–8·5,which would give T_P = 41 K (vs 250 K based on Fe₈) beneathglobal ocean ridges. The lack of Fe₇₂–Si₇₂ and Si₇₂–ridgedepth correlations provides no evidence that MORB melts preservepressure signatures as a function of ridge axial depth. We thusfind no convincing evidence for T_P > 50 K beneath globalocean ridges. The averages have also revealed significantcorrelations of MORB chemistry (e.g. Ti₇₂, Al₇₂, Fe₇₂,Mg₇₂, Ca₇₂, Na₇₂ and Ca₇₂/Al₇₂) with ridge axial depth. Thechemistry–depth correlation points to an intrinsic linkbetween the two. That is, the 5 km global ridge axial reliefand MORB chemistry both result from a common cause: subsolidusmantle compositional variation (vs T_P), which determines themineralogy, lithology and density variations that (1) isostaticallycompensate the 5 km ocean ridge relief and (2) determine thefirst-order MORB compositional variation on a global scale.A progressively more enriched (or less depleted) fertileperidotite source (i.e. high Al₂O₃ and Na₂O, and low CaO/Al₂O₃)beneath deep ridges ensures a greater amount of modal garnet(high Al₂O₃) and higher jadeite/diopside ratios in clinopyroxene(high Na₂O and Al₂O₃, and lower CaO), making a denser mantle,and thus deeper ridges. The dense fertile mantle beneath deepridges retards the rate and restricts the amplitude of the upwelling,reduces the rate and extent of decompression melting, givesway to conductive cooling to a deep level, forces melting tostop at such a deep level, leads to a short melting column,and thus produces less melt and probably a thin magmatic crustrelative to the less dense (more refractory) fertile mantlebeneath shallow ridges. Compositions of primitive MORB meltsresult from the combination of two different, but geneticallyrelated processes: (1) mantle source inheritance and (2) meltingprocess enhancement. The subsolidus mantle compositional variationneeded to explain MORB chemistry and ridge axial depth variationrequires a deep isostatic compensation depth, probably in thetransition zone. Therefore, although ocean ridges are of shalloworigin, their working is largely controlled by deep processesas well as the effect of plate spreading rate variation at shallowlevels. KEY WORDS: mid-ocean ridges; mantle melting; magma differentiation; petrogenesis; MORB chemistry variation; ridge depth variation; global correlations; mantle compositional variation; mantle source density variation; mantle potential temperature variation; isostatic compensation  相似文献   

Tidal inundation mapping under enhanced land subsidence in Semarang,Central Java Indonesia   总被引：3，自引：0，他引：3  

Muh Aris Marfai  Lorenz King 《Natural Hazards》2008,44(1):93-109

Tidal inundation by high tide under enhanced land subsidence is a damaging phenomenon and a major threat to the Semarang urban area in Indonesia. It impacts on economic activities, as well as the cost of an emergency program and causes interruption of pubic services, danger of infectious diseases and injury to human lives. This study examines a spatial analysis tool on the GIS-raster system for the tidal inundation mapping based on the subsidence-benchmark data and modified detail digital elevation model. Neighborhood operation and iteration model as a spatial analysis tool have been applied in order to calculate the encroachment of the tidal inundation on the coastal area. The resulting map shows that the tidal flood spreads to the lowland area and causes the inundation of coastal settlement, infrastructure, as well as productive agricultural land, i.e., the fish-pond area. The monitoring of the vulnerable area due to the tidal inundation under the scenario of extended land subsidence plays an important role in long-term coastal zone management in Semarang.  相似文献