Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil     

Yu Xiaodong  Yan Shuwang Sun Wanhe Postgraduate Student  Tianjin University  Tianjin Professor  Tianjin University  Tianjin Senior Engineer  Tianjin Port Engineering Institute  Tianjin 《中国海洋工程》1997,(2)

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.  相似文献   

Model Test of Sand Restraining Force on Pipeline     

Zhang Jianguo Yan Chi Yan Shuwang Lecturer  Dept. of Hydraulic Eng.  Tianjin University  Tianjin Associate Professor  Dept. of Hydraulic Eng.  Tianjin University  Tianjin Professor  Dept. of Hydraulic Eng.  Tianjin University  Tianjin 《中国海洋工程》1996,(1)

This paper describes the model tests for determining the axial friction and the lateral resistance of sand to pipeline by using fine sand and prototype pipeline, and the calculation method based on limit analysis theory is verified. The effect of cyclic loading is considered in the test.  相似文献   

港口靠船桩工作性状计算的双参数法   总被引：8，自引：0，他引：8  

谢耀峰 《海洋工程》2002,20(2):38-42,48

港口靠船桩是承受重复性荷载或多循环荷载的一种横向承载桩。双参数法能较好地描述靠船桩 (单桩、群桩 )的桩土工作性状。用双参数法进行计算时 ,所给的地面条件必须由重复荷载或多循环荷载作用下实测出来。根据现场试桩资料 ,标定桩土参数 ,即k =mx1/n的指数l/n、桩土相对柔度系数α、桩土综合刚度EI等值 ,可以用来设计试桩附近局部地区同类条件下的其它长桩。对于没有进行试桩的某些工程 ,可以联合运用双参数法和p -y曲线法进行桩的分析  相似文献   

Acoustic and stiffness properties of gillnets as they relate to small cetacean bycatch     

Mooney  T. Aran; Au  Whitlow W. L.; Nachtigall  Paul E.; Trippel  Edward A. 《ICES Journal of Marine Science》2007,64(7):1324-1332

  相似文献   

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses   总被引：1，自引：0，他引：1  

Byoung Wan Kim  Sa Young Hong  Jo Hyun Kyoung  Seok Kyu Cho 《Ocean Engineering》2007,34(11-12):1668-1679

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.  相似文献   

绿片岩三轴流变力学特性的研究(Ⅰ):试验结果   总被引：17，自引：4，他引：17  

徐卫亚  杨圣奇  杨松林  谢守益  邵建富  王义锋 《岩土力学》2005,26(4):531-537

为了解锦屏一级水电站坝基绿片岩的流变力学特性，采用岩石全自动流变伺服仪对绿片岩进行了三轴压缩流变试验。基于试验结果，研究了绿片岩在不同围压作用下的轴向应变以及侧向应变随时间的变化规律，讨论了流变特性对岩石应力一应变曲线的影响，探讨了不同应力水平下的轴向以及侧向流变速率变化趋势，分析了不同围压下流变的破裂机制，掌握了绿片岩三轴流变的基本规律，从而为该水电站工程流变数值分析时参数的辨识提供了可靠的依据。  相似文献   

Proportioning earthquake‐resistant RC frames in central/eastern U.S.     

JoAnn Browning 《地震工程与结构动力学》2002,31(6):1267-1280

A maximum allowable period criterion is used to determine reasonable stiffness requirements for reinforced concrete frames with the seismicity associated with central and eastern U.S. A general relationship is developed to describe the displacement demand expected for central and eastern U.S. based on a survey of available ground motions, opinions of seismologists, and code‐based provisions. A series of hypothetical reinforced concrete frames is proportioned using a maximum allowable period criterion and evaluated for expected maximum displacement response using non‐linear dynamic analyses and a suite of ground motions. Results indicate that for the reinforced concrete structural systems considered in the study, proportioning for gravity loads will provide sufficient stiffness in central and eastern U.S. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

A non-linear stress-stiffness model for geomaterials at small to intermediate strains     

S. Shibuya 《Geotechnical and Geological Engineering》2002,20(4):333-369

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.  相似文献   

ISO-834标准火灾作用后钢管混凝土的轴压刚度和抗弯刚度   总被引：4，自引：1，他引：4  

霍静思  韩林海 《地震工程与工程振动》2002,22(5):143-151

火灾后钢管混凝土的轴压刚度和抗弯刚度是钢管混凝土结构变形性能和抗震分析的重要指标，也是火灾后钢管混凝土修复和加固的重要依据之一，本文利用数值方法计算了标准火灾作用后钢管混凝土轴压构件和纯弯构件荷载-变形关系曲线，分析了受火时间、材料强度、含钢率、截面尺寸等因素的影响规律，最后推导了标准火灾作用后钢管混凝土轴压刚度和抗弯刚度的简化计算公式，所得结果可供有关钢管混凝土结构工程设计时参考。  相似文献   

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析     

李慧峰  张玉蓉 《地震研究》2002,25(1)

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架  相似文献