排序方式： 共有55条查询结果，搜索用时 78 毫秒
1.
This review gives an overview of the use and development of reference materials of geochemical and environmental interest in the literature of the years 2004 and 2005. In these years the performance of existing methods has been improved and new geochemical applications using new techniques have been developed. Accordingly, there was an increasing need for new reference materials, especially for in situ microanalysis and for precise stable isotope measurements. In addition, there was a notable trend for further characterisation of existing reference materials, mainly for the platinum-group elements. This review focuses on five topics: reference materials for platinum-group elements, reference glasses for in situ microanalysis, zircon reference materials, isotopic reference materials, and the development and certification of reference materials. 相似文献
2.
详细地介绍了时分制视频立体观察的原理及其在摄影测量领域的具体应用,同时对“基于微机的数字视频立体测图系统”从原理到实践做了初步探讨。 相似文献
3.
Determination of Lithium, Beryllium and Boron at Trace Levels by Laser Ablation-Inductively Coupled Plasma-Sector Field Mass Spectrometry 总被引：1，自引：2，他引：1
Massimo Tiepolo Alberto Zanetti Riccardo Vannucci 《Geostandards and Geoanalytical Research》2005,29(2):211-224
The analytical capabilities of laser ablation (LA)-ICP-MS in determining Li, Be and B at trace levels in geological samples have been tested on a series of glass reference materials and natural samples. The LA-ICP-MS instrument used consisted of a sector-field ICP-MS coupled with a laser ablation microprobe operating at either 266 or 213 nm wavelength. Reference glasses from NIST (SRM 612, 614 and 616) and MPI-DING (KL2-G, ML3B-G, StHs6/80-G, GOR128-G, GOR132-G, T1-G and ATHO-G) were selected to develop the analytical method and to assess the best instrumental configuration. A series of calcic amphiboles with different Li, Be and B concentrations were also analysed using both LA-ICP-MS and SIMS to test the applicability of the method to natural minerals. Results indicated that with a spot size of 40 μm the agreement between measured and reference values of Li, Be and B is generally better than 10% for NIST SRM 612 and 20% for NIST SRM 614. Average reproducibility at the 2s level was 10% for Li, 20% for Be and 15% for B. Limits of detection were approximately 100 ng g-1 for Be and B and 200 ng g-1 for Li. These results were confirmed by analyses carried out on natural amphiboles and compared well in terms of precision and accuracy with those commonly achieved by SIMS. 相似文献
4.
5.
铝硅酸盐矿物和玻璃中Al的配位与局部结构 总被引：3，自引：2，他引：1
利用同步辐射的AlK边X射线吸收近进结构（XANES）谱研究了刚玉和铝硅酸盐矿物（蓝晶石,红柱石,夕线石和钠长石）中Al的配位与局部结构,证明该方法可以作为新的结构探针研究结构未知体系中Al的配位与局部结构。例如,Al的K边XANES谱证明在室温压条件,钠长石玻璃中的Al保持为四面体配位（AlIV）,局部结构与钠长石晶体中的Al相似;尽管硬玉晶体中的Al为八面体配位,但硬玉玻璃中的Al变为四面体配位（AlIV）。而在相同的高温压条件（4．4GPa,1575C）下制备的硬玉-钠长石玻璃系列中,压力引起四面体配位的Al变成五次（Alv）和六次配位（AlVl）,且五次和六次配位Al的比例随玻璃中硬玉含量的增加而增大。 相似文献
6.
S. Rossano E. Balan G. Morin J.-P. Bauer G. Calas C. Brouder 《Physics and Chemistry of Minerals》1999,26(6):530-538
Tektite glasses are investigated using 57Fe Mössbauer spectroscopy. Room temperature spectra analysis is performed using two complementary analytical methods based on two-dimensional distributions of both isomer shift and quadrupole splitting. No a priori correlation between the two hyperfine parameters is considered. The first method, based on a shape independent distribution, provides the justification for the Gaussian distribution shape used in the second method. No ferric iron contribution is evidenced by Mössbauer spectra analysis in these samples, although several criteria are used. Ferrous iron sites are shown to be continuously distributed between four- and five-fold co-ordinated sites. 相似文献
7.
Zhaochu Hu Yongsheng Liu Ming Li Shan Gao Laishi Zhao 《Geostandards and Geoanalytical Research》2009,33(3):319-335
New analytical results are reported for rarely determined elements Be, B, Ge, As, Mo, Rh, Pd, Ag, Cd, In, Sn, Sb, W, Re, Ir, Pt, Au, Tl and Bi in MPI‐DING and USGS (BCR‐2G, BHVO‐2G, BIR‐1G) silicate glasses and the NIST SRM 610‐614 synthetic soda‐lime glasses using 193 nm ArF excimer laser ablation and quadrupole ICP‐MS. The method used involved external calibration against GOR132‐G for Ir and NIST SRM 610 for other elements, internal standardisation using Ca, and ablation with a crater diameter of 160 μm and a pulsed laser repetition rate of 10 Hz. Small amounts of nitrogen (5 ml min?1) were added to the central channel gas of the plasma to improve the limits of detection for most of these elements by a factor of 1.2–2.5 and to reduce the oxide interference level to 0.02% (ThO+/Th+). Under these conditions, the LODs for most of these rarely determined elements were within the range 0.1 to 10 ng g?1. The operating conditions that were required to minimise ICP‐induced fractionation (U+/Th+≈ 1) in the mode without nitrogen were accompanied by a 50–60% reduction in sensitivity for elements such as Ca, Au and Pt. In contrast, ICP‐induced fractionation could be minimised (U+/Th+≈ 1) with no loss of analyte sensitivity in the nitrogen mode. Interferences of CuAr+, ZnAr+, Cd+, Pb2+ and Sn+ on Pd+, Rh+, Cd+ and In+ were corrected. Oxide interferences were not considered due to their lower production rate. Analytical precision, as given by one relative standard deviation (% RSD) was less than 15% for most of the elements present at concentrations greater than 0.1 μg g?1. A significant negative correlation was found between logarithmic concentration and logarithmic RSD, with a correlation coefficient of ?0.76. This trend indicates that possible chemical heterogeneities for most of these elements are smaller than the analytical uncertainty. Our results for Be, B, Ge, Sb and W are generally in good agreement with their reference values. In contrast, other elements in many of the reference glasses have only information values, upper limits or even no values, which restrict any detailed evaluation of the accuracy of the determined values. However, concentrations from multiple isotopes of one element analysed in this study showed excellent agreement, which guarantee the quality of our data to a certain extent. 相似文献
8.
高温熔融研制钾长石玻璃标准物质初探 总被引：1，自引：1，他引：0
激光剥蚀多接收等离子体质谱(LA-MC-ICPMS)是进行原位微区分析微量元素和同位素的重要技术之一,标准样品与样品之间的基体匹配是解决影响该技术准确分析的基体效应和分馏效应的首选方案。长石(特别是长石微区)的Pb同位素组成是示踪岩石形成和演化历史的重要途径,而LA-MC-ICPMS技术则是进行长石Pb同位素原位微区分析的关键技术,然而目前国内外尚没有合适的长石Pb同位素分析标准。文章研究探讨了利用高温炉进行原位微区分析钾长石中Pb同位素组成所用外部标准物质合成条件,结果表明,常规的74μm(200目)碎样无法得到均一的钾长石玻璃,需要将初始钾长石粉末研磨至1300目以下;高温炉合成温度为1680℃;熔融时间为2 h;采用液氮方式淬火。制成的钾长石玻璃除表面具有轻微的不均一性外,内部的Pb同位素比值为1.90779±0.00009(208Pb/206Pb,2s),0.75899±0.00004(207Pb/206Pb,2s),20.909±0.002(206Pb/204Pb,2s),15.871±0.002(207 Pb/204 Pb,2s)和39.888±0.005(208 Pb/204 Pb,2s),相应的相对标准偏差(RSD)分别为0.007%、0.008%、0.016%、0.016%和0.021%。表明利用本研究方法合成的钾长石玻璃可作为潜在的钾长石中Pb同位素组成原位微区分析外部校准物质。 相似文献
9.
Sr and Pb isotopic composition of five USGS glasses (BHVO-2G, BIR-1G, BCR-2G, TB-1G, NKT-1G) 总被引：2，自引：0，他引：2
Marlina Elburg Pieter Vroon Bas van der Wagt Arnaud Tchalikian 《Chemical Geology》2005,223(4):196-207
Sr isotopic compositions and Rb / Sr ratios of three USGS glasses (BHVO-2G, BIR-1G, BCR-2G) are identical to those of the original USGS reference materials. NKT-1G and TB-1G give values of 0.70351 and 0.70558, respectively. Pb isotopic ratios were measured by the standard-sample bracketing technique on an MC-ICP-MS, which give results that are comparable in accuracy and reproducibility to double spike analyses. However, assessment of the reproducibility of the technique is hampered by inhomogeneous contamination of all USGS reference materials analysed. This contamination is likely to be the reason why the USGS glasses do not all have the same Pb isotopic composition as their unfused originals. Powdered glasses, distributed for characterisation of the glasses by bulk analytical techniques, do not all have the same Pb isotopic compositions as the solid glass material, and can therefore not be used for this purpose. 相似文献
10.
Dorrit E. Jacob 《Geostandards and Geoanalytical Research》2006,30(3):221-235
Fifty-two trace elements in NIST SRM 614, 616 and MPI-DING BM90/21-G glass reference materials as well as in NIST SRM 612, USGS BCR2-G and other MPI-DING reference glasses (KL2-G, GOR132-G, GOR128-G, ATHO-G, Tl-G, StHs6/80-G and ML3B-G) were determined by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). Accurate ultra-low trace element abundances in the NIST SRM 614, 616 and BM90/21-G reference glasses down to lower ng g−1 levels were determined with relative standard deviations (RSD) of less than 10%. Limits of detection using He as carrier gas were up to two times lower than with Ar and were 0.004 to 0.12 μg g−1 for elements of lower mass numbers (amu < 85) and 0.002 to 0.06 μg g−1 for elements having amu < 85. The measured concentrations generally agree within 15% with previous studies except for B in NIST SRM 614 and 616, which appears to be heterogeneously distributed, and Co, Zn, Ga and Ag in NIST SRM 616 for which the existing data set is too small to evaluate the discrepancies. New values for As (0.593 μg g−1 ), Ag (0.361 μg g−1 ) and Cd (0.566 μg g−1 ) in NIST SRM 614 and new values for Na (94864 μg g−1 ) and As (0.276 μg g−1 ) in NIST SRM 616 are reported. 相似文献