Aliasing due to sampling of the Adriatic temperature, salinity and density in space     

Zoran Pasari&#x;  Mirko Orli&#x;  Craig M. Lee 《Estuarine, Coastal and Shelf Science》2006,69(3-4):636

High-resolution underway temperature and conductivity measurements collected by R/V Knorr during winter and spring 2003 are used to characterize errors associated with spatial aliasing in the northern and central Adriatic Sea. During winter, 99th percentile temperature, salinity and density errors were 0.62 °C, 0.25 and 0.12 kg/m³ (0.25 °C, 0.10 and 0.05 kg/m³) for sampling at 10 km (5 km) horizontal resolution, respectively. The corresponding values in spring were 1.31 °C, 0.50 and 0.40 kg/m³ (0.93 °C, 0.25 and 0.22 kg/m³) for the 10 km (5 km) sample spacing, respectively. The largest errors were associated with energetic regions over the shallow, western Adriatic, in front of the Po River mouth and off the tip of the Istrian peninsula. The deeper eastern basin exhibited smaller errors. The variability of errors in time and space reflected the variability of small-scale density features, characterized by wavelengths as small as 2 km in winter and 1 km in spring and being more pronounced in the western and northern parts of the Adriatic. As these results indicate that errors associated with undersampling can be considerable, they should be taken into account while planning future CTD measurements in the region.  相似文献   

利用频谱解混叠方法实现超分辨率影像重建   总被引：3，自引：0，他引：3  

钦桂勤  耿则勋  徐青 《测绘学报》2003,32(2):143-147

基于信号处理的超分辨率影像重建技术，可以消除由影像系统引起的影像模糊和退化，同时恢复出光学权限外的频谱信息。首先简要介绍了超分辨率影像重建技术的意义和基本过程；并对影像配准与运动模型估计在超分辨率影像重建中的作用给予简要介绍；接着根据连续傅里叶变换(CFT)和离散傅里叶变换(DFT)的频谱混叠关系及CFT位移性质，推导出频谱解混叠的超分辨率影像重建模型；最后采用文献中的运动模型估计方法和本文的重建算法，对几组数据进行实验，获得了空间分辨率提高近1倍的影像。  相似文献   

基于矢量图形的反走样技术及其应用   总被引：2，自引：0，他引：2  

王建涛  吴官祥 《测绘学院学报》2001,18(3):229-231

介绍现行基于矢量图形反走样技术的几种实现方法，给出了一个较为适用的快速反走样算法，介绍了它的原理、算法并将它的结果在不同环境下与走样直线作了对比，最后利用它对数字地图和矢量字符进行了反走样分析。  相似文献   

A Velocity Dealiasing Scheme for C-band Weather Radar Systems简     

LI Gang  HE Guangxin  Xiaolei ZOU  Peter Sawin RAY 《大气科学进展》2014,31(1):17-26

A dealiasing algorithm for radar radial velocity observed by C-band Doppler radars is presented as an extension of an existing S-band dealiasing algorithm. This has operational significance in that many portable and many commercial broadcast radars, as well as approximately one half of the Chinese weather radar network （CINRAD）, are C-band radars. With a wavelength of about 5 cm, the Nyquist interval of C-band radars is just about one half that of S-band radars （wavelength of about 10 cm） and thus has more velocity folding. The proposed algorithm includes seven modules to remove noisy data, find the starting radials, dealias velocities, and apply least squares error checking in both the radial and azimuth directions. The proposed velocity dealiasing method was applied to one widespread rain case and three strong convective cases from radars operating in China. It was found that, on average, 92.95% of the aliased radial velocity data could be correctly de-aliased by the algorithm, resulting in 96.65% of the data being valid.  相似文献   

A scheme for resampling, filtering, and subsampling unevenly spaced laser Doppler anemometer data     

《Mathematical Geology》1995,27(6):731-748

Laser Doppler Anemometry (LDA) has proved a powerful tool for quantifying fluid turbulence and is increasingly being applied in fields such as fluvial sedimentology and geomorphology. When operated in the burst-signal processing mode, high-frequency velocity fluctuations are measured at irregular time internals. In many situations, there is a need to transform these data to obtain evenly spaced velocity values but at a lower frequency. However, clear guidelines for this type of data processing are lacking. Three steps are necessary in order to transform the original files into evenly spaced data: (1) resampling at the average sampling rate, (2) low-pass filtering with half-power frequency adjusted to the final sampling frequency, and (3) decimating at the desired frequency. The decision taken at each step will affect the resulting signal and may cause, if not assessed carefully, severe problems in the signal such as aliasing errors. This paper examines each stage of data processing and details the advantages and drawbacks of different techniques in relation to the effects on turbulence statistics (variance, instantaneous shear stress, etc.). A standard method and specific guidelines are finally proposed. An erratum to this article is available at .  相似文献   

提高INSAR干涉图质量的过采样方法     

刘智  王冬红  刘军 《测绘科学技术学报》2006,23(2):130-133

在对干涉图中频谱混叠噪声的成因及其影响进行深入分析的基础上,研究通过对原始影像频谱进行过采样来消除频谱混叠的方法;同时为了将过采样后的干涉图恢复到原始影像大小,又探讨了干涉图的欠采样理论,并推导出加权欠采样函数.实验结果表明,文中的过采样--加权欠采样方法能有效消除干涉图中的频谱混叠噪声,经欠采样处理后的干涉图条纹边缘更加清晰,残余点数较原始干涉图减少90%以上.  相似文献   

一种削弱信噪混叠的EMD降噪方法     

鲁铁定  钱文龙  贺小星  汪鑫 《大地测量与地球动力学》2020,40(2):111-116

针对经验模态分解(empirical mode decomposition,EMD)降噪过程中存在信号与噪声模态混叠及直接将分界本征模态函数(intrinsic mode function,IMF)分量归入高频噪声造成真实信号被“湮没”等问题,提出一种改进的EMD降噪方法。该方法将经EMD得到的第2个IMF分量至分界IMF分量进行重构,对重构信号进行下一次EMD,获取其中的“真实”信号,多次重复此操作,最后将所有获得的低频信号累加,从而达到降噪的目的。利用2种模拟数据和1种GPS实测高程数据进行实验,模拟数据与实测数据采用不同的评价指标评价降噪效果,结果表明,改进的EMD方法较传统EMD方法降噪效果更佳,验证了该方法的可靠性。  相似文献   

短时单频脉冲震源的海洋浅地层剖面资料频移处理     

刘玉萍  李丽青  薛花  邓桂林  张宝金 《CT理论与应用研究》2014,(2):227-235

采用短时单频脉冲震源的浅地层剖面,记录的波形数据空间假频较严重。因其信号具有频率高、频带窄的特征,通常利用Hiibert变换提取瞬时振幅属性（信号包络）供解释使用。但瞬时振幅均为正值,在进行构造解释时不方便使用。本文提出在对浅层剖面资料提取瞬时振幅的基础上,计算瞬时振幅的微分并配合滤波的方法,实现高频窄带浅地层剖面资料的一种频移处理。该方法把高频窄带的多周期信号变为低频带宽的单周期信号,有效扩展了倍频程并消除假频。应用在南海浅地层剖面资料处理中,资料处理后更利于构造解释。  相似文献   

Variogram Model Selection via Nonparametric Derivative Estimation     

David J. Gorsich  Marc G. Genton 《Mathematical Geology》2000,32(3):249-270

Before optimal linear prediction can be performed on spatial data sets, the variogram is usually estimated at various lags and a parametric model is fitted to those estimates. Apart from possible a priori knowledge about the process and the user's subjectivity, there is no standard methodology for choosing among valid variogram models like the spherical or the exponential ones. This paper discusses the nonparametric estimation of the variogram and its derivative, based on the spectral representation of positive definite functions. The use of the estimated derivative to help choose among valid parametric variogram models is presented. Once a model is selected, its parameters can be estimated—for example, by generalized least squares. A small simulation study is performed that demonstrates the usefulness of estimating the derivative to help model selection and illustrates the issue of aliasing. MATLAB software for nonparametric variogram derivative estimation is available at http://www-math.mit.edu/~gorsich/derivative.html. An application to the Walker Lake data set is also presented.  相似文献   

The reduction of aliasing in gravity anomalies and geoid heights using digital terrain data   总被引：8，自引：0，他引：8  

W. E. Featherstone  & J. F. Kirby 《Geophysical Journal International》2000,141(1):204-212

Observations of gravity can be aliased by virtue of the logistics involved in collecting these data in the field. For instance, gravity measurements are often made in more accessible lowland areas where there are roads and tracks, thus omitting areas of higher relief in between. The gravimetric determination of the geoid requires mean terrain-corrected free-air anomalies; however, anomalies based only on the observations in lowland regions are not necessarily representative of the true mean value over the topography. A five-stage approach is taken that uses a digital elevation model, which provides a more accurate representation of the topography than the gravity observation elevations, to reduce the unrepresentative sampling in the gravity observations. When using this approach with the Australian digital elevation model, the terrain-corrected free-air anomalies generated from the Australian gravity data base change by between 77.075 and −84.335 mgal (−0.193 mgal mean and 2.687 mgal standard deviation). Subsequent gravimetric geoid computations are used to illustrate the effect of aliasing in the Australian gravity data upon the geoid. The difference between 'aliased' and 'non-aliased' gravimetric geoid solutions varies by between 0.732 and −1.816 m (−0.058 m mean and 0.122 m standard deviation). Based on these conceptual arguments and numerical results, it is recommended that supplementary digital elevation information be included during the estimation of mean gravity anomalies prior to the computation of a gravimetric geoid model.  相似文献