Transient‐state groundwater flow in various geometries with wells at arbitrary positions: analytical methods     

M. W. Roth  C. M Wilson  M. Z. Iqbal 《水文研究》2003,17(17):3519-3530

We have developed a method for analytically solving the porous medium flow equation in many different geometries for horizontal (two‐dimensional), homogeneous and isotropic aquifers containing impermeable boundaries and any number of pumping or injection wells located at arbitrary positions within the system. Solutions and results are presented for rectangular and circular aquifers but the method presented here is easily extendible to many geometries. Results are also presented for systems where constant head boundary conditions can be emulated internal to the aquifer boundary. Recommendations for extensions of the present work are briefly discussed. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Metamorphism in Archaean greenstone belts: calculated fluid compositions and implications for gold mineralization     

R. POWELL  T. M. WILL  G. N. PHILLIPS 《Journal of Metamorphic Geology》1991,9(2):141-150

An inescapable consequence of the metamorphism of greenstone belt sequences is the release of a large volume of metamorphic fluid of low salinity with chemical characteristics controlled by the mineral assemblages involved in the devolatilization reactions. For mafic and ultramafic sequences, the composition of fluids released at upper greenschist to lower amphibolite facies conditions for the necessary relatively hot geotherm corresponds to those inferred for greenstone gold deposits (X_CO2= 0.2–0.3). This result follows from the calculation of mineral equilibria in the model system CaO–MgO–FeO–Al₂O₃–SiO₂–H₂O–CO₂, using a new, expanded, internally consistent dataset. Greenstone metamorphism cannot have involved much crustal over-thickening, because very shallow levels of greenstone belts are preserved. Such orogeny can be accounted for if compressive deformation of the crust is accompanied by thinning of the mantle lithosphere. In this case, the observed metamorphism, which was contemporaneous with deformation, is of the low-P high-T type. For this type of metamorphism, the metamorphic peak should have occurred earlier at deeper levels in the crust; i.e. the piezothermal array should be of the ‘deeper-earlier’type. However, at shallow crustal levels, the piezothermal array is likely to have been of ‘deeper-later’type, as a consequence of erosion. Thus, while the lower crust reached maximum temperatures, and partially melted to produce the observed granites, mid-crustal levels were releasing fluids prograde into shallow crustal levels that were already retrograde. We propose that these fluids are responsible for the gold mineralization. Thus, the contemporaneity of igneous activity and gold mineralization is a natural consequence of the thermal evolution, and does not mean that the mineralization has to be a consequence of igneous processes. Upward migration of metamorphic fluid, via appropriate structurally controlled pathways, will bring the fluid into contact with mineral assemblages that have equilibrated with a fluid with significantly lower X_CO2. These assemblages are therefore grossly out of equilibrium with the fluid. In the case of infiltrated metabasic rocks, intense carbonation and sulphidation is predicted. If, as seems reasonable, gold is mobilized by the fluid generated by devolatilization, then the combination of processes proposed, most of which are an inevitable consequence of the metamorphism, leads to the formation of greenstone gold deposits predominantly from metamorphic fluids.  相似文献   

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads     

Cheng‐Der Wang  Jyh‐Jong Liao 《国际地质力学数值与分析法杂志》2002,26(14):1449-1476

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

An alternative approach to the structural motion analysis of wedge-beam offshore structures supporting a load     

J. S. Wu  K. -W. Chen 《Ocean Engineering》2003,30(14):1791-1806

For convenience of dynamic analysis, some offshore structures such as fixed-type platforms are often modeled as the wedge beams supporting tip lumped masses. It is well-known that, due to the effect of the surrounding water, the natural frequencies of a beam in air (or dry beam) are different from those of the same beam immersed in water (or wet beam). However, if the natural frequencies and the associated mode shapes of a dry beam are calculated by taking account of the “added mass” for the immersed beam, then the last natural frequencies and mode shapes will be equal to the corresponding ones of the wet beam. Based on the last concept, the closed form solutions for natural frequencies and the associated mode shapes of the dry beam were determined first, then the partial differential equation of motion for the wet beam was transformed into a matrix equation by using the expansion theorem and the foregoing closed form solutions of free vibration responses for the dry beam. Solving the last matrix equation will give the required natural frequencies and the associated mode shapes of the wet beam. The formulation of this paper is available for the fully or partially immersed double tapered beams with either circular, square or rectangular cross-sections. The taper ratio for width and that for depth may be equal or unequal. The numerical results of this paper were compared with the existing results or the finite-element-method results and good agreement was achieved.  相似文献   

Observations and Estimations of Directional Spectrum of Sea Waves   总被引：1，自引：1，他引：1  

Liu Shuxue Yu Yuxiu Assistant Researcher  State Key Laboratory of Coastal  Offshore Engineering  Dalian University of Technology 《中国海洋工程》1995,(1)

The directional spectrum is one of the basic characteristics of sea waves. The observations of directional spectrum of sea waves were successfully conducted at platform Bohai 8 during 1991 and 1992 using a wave gage array for the first time in China. Based on the field data, the directional spectrum which depends on the wave growth is given in this paper. Before observations, the effects of the type of gage array, the distance between the gages and the platform itself on the measured results and the precision of some methods for estimating the directional spectrum were investigated and compared with the methods of numerical simulations and model tests of multi-direcitonal irregular waves. This ensures the quality of the observations and estimations of the directional spectrum.  相似文献   

Hydroelastic Analysis of Very Large Floating Structures Using Plate Green Functions   总被引：4，自引：0，他引：4  

闫红梅  崔维成  刘应中 《中国海洋工程》2003,17(2)

1 .IntroductionRecentlygreatinteresthasbeenshowninthedevelopmentofverylargefloatingstructuressuchasMegaFloatofJapan (Isobe ,1 999)andMOBofUSA (Remmers ,1 999) .Owingtotheirextremelargesizeandgreatflexibility ,thecouplingbetweenthestructuraldeformationandfluidmotionissignifi cant.Thisisatypicalproblemofhydroelasticity .Efficientandaccurateestimationofthehydroelasticresponseofverylargefloatingstructuresinwavesisveryimportantfordesign .Manymethodshavebeenproposedinliteratureforthepredictiono…  相似文献   

主动式声纳列阵拖曳系统姿态数值计算   总被引：2，自引：1，他引：2  

卢军 《海洋工程》2001,19(3):85-90

主动式声纳列阵拖曳系统是用于探测潜艇的新型声纳系统，为了准确探测潜艇的位置，必须首先预报声纳列阵的瓷态，本文通过对其三维力学模型的分析，得到该系统的运动微分方程，其中缆索的力学方程是基于Ablow和Milinazzo的模型，而对于拖体则运用六自由度空间运动方程模拟，结合边界条件，用有限差分法求解，通过对拖船的不同运动状态如匀速，变速和回转的计算，证明本文的方法对于预报声纳列阵的姿态是有效的。  相似文献   

相控阵技术在大气探测中的应用及面临的挑战     

杨金红  高玉春  程明虎 《地球科学进展》2008,23(2):142-150

摘要： 近年国际上相控阵技术在大气探测领域中的应用有了重要进展,成为雷达气象学研究的又一新热点,并可能成为今后天气雷达发展的重要方向。介绍了相控阵技术在大气探测中应用现状和研究进展,以及近年在气象应用中所获得的最新研究结果,展望了相控阵技术的应用前景,进一步讨论了开展相控阵技术研究所面临的技术挑战和未来发展的方向。为我国开展相控阵天气雷达的研制提供参考。  相似文献   

In-flight geometric calibration of different cameras of IRS-P6 using a physical sensor model   总被引：2，自引：1，他引：1  

P. V. Radhadevi    S. S. Solanki 《The Photogrammetric Record》2008,23(121):69-89

  相似文献   

地形因素对航空面阵CCD影像的影响分析与评价   总被引：1，自引：0，他引：1  

卫征  刘学  张兵 《国土资源遥感》2008,(1):27-30

地形因素,包括地面起伏和地球曲率,是造成航空数字遥感影像变形的主要原因之一.本文以中国科学院遥感所自行研发的多模态航空CCD相机系统为对象,结合其成像模式和几何形态,分析了地形因素给影像带来的变形,推导出航空面阵CCD影像变形的一般公式,并通过概算进行了定量评价,得出了对于航空面阵CCD影像,要想得到高精度的几何处理,必须改正地球曲率影响的结论.  相似文献