钢支撑性能对高层钢结构动力反应的影响   总被引：1，自引：0，他引：1  

邓雪松  张耀春 《地震工程与工程振动》1997,17(3):52-59

钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。  相似文献   

A finite differences formulation for the linear and nonlinear dynamics of 2D catenary risers   总被引：1，自引：0，他引：1  

Ioannis K. Chatjigeorgiou   《Ocean Engineering》2008,35(7):616-636

A finite differences (FD) solution method is proposed for the numerical treatment of the dynamic equilibrium problem of 2D catenary risers. The method is based on the so-called Box approximation, which in the scope of the present contribution is applied to the complete nonlinear model as well as to the reduced linearized formulation. The application of the Box method transforms the original governing systems into convenient sets of algebraic equations, which in turn are solved efficiently by the relaxation method. Extensive numerical calculations are presented that describe the dynamic behaviour of the structure and evaluate the amplification in loading due to the dynamic components. The effect of the geometric nonlinearities is assessed through comparative calculations that concern both mathematical formulations examined in the present, i.e. the complete nonlinear, and the reduced linearized model. Special attention is paid to the heave excitations as they amplify significantly the magnitudes of the loading components.  相似文献   

钢梁阻尼器的最佳延性率及其控制     

陆顺永 《地震工程与工程振动》1995,15(4):85-92

基于双线性和三线性的力－位移滞回线假设，导出了钢梁阻尼器隔震系统等效阻尼比与阻尼器延性率的关系；为了获得大阻尼比隔震系统，以尽量减小隔震系统的地震反应，求得了使系统阻尼比为最大的阻尼器相应延性率（即最佳延性率）所需满足的条件；给出了在给定地震地面运动输入条件下，使系统阻尼器变形位移达到最佳延性率的阻尼器初始刚度和屈服位移的确定方法。  相似文献   

深水钻井隔水管紧急脱离后的反冲响应   总被引：1，自引：0，他引：1  

李朝玮  樊洪海  汪志明  沈维格  王义顷 《海洋工程》2015,33(4):121-127

深水钻井中,在恶劣海况或浮式平台定位失效等情况下,需紧急断开隔水管与水下防喷器的连接。隔水管突然脱离后会加速向上反冲,如果反冲作用控制不当,可能威胁钻井平台、隔水管体和水下井口的安全。介绍了国外隔水管紧急脱离与反冲响应的研究情况,分析了隔水管紧急脱离的原因与程序、脱离后的反冲过程、反冲控制方式和成功脱离标准、反冲响应的分析方法。建议:由于南海深水海况复杂,作业者需制定紧急脱离的预案和作业规程,并进行紧急脱离操作培训;由于隔水管紧急脱离后的反冲响应涉及多个非线性瞬态过程,研究者应该开展隔水管紧急脱离测试和反冲响应模拟计算,开发隔水管反冲响应分析软件。  相似文献   

Damage localization of marine risers using time series of vibration signals     

Hao Liu  Hezhen Yang  Fushun Liu 《中国海洋大学学报(英文版)》2014,13(5):777-781

Based on dynamic response signals a damage detection algorithm is developed for marine risers. Damage detection methods based on numerous modal properties have encountered issues in the researches in offshore oil community. For example, significant increase in structure mass due to marine plant/animal growth and changes in modal properties by equipment noise are not the result of damage for riser structures. In an attempt to eliminate the need to determine modal parameters, a data-based method is developed. The implementation of the method requires that vibration data are first standardized to remove the influence of different loading conditions and the autoregressive moving average (ARMA) model is used to fit vibration response signals. In addition, a damage feature factor is introduced based on the autoregressive (AR) parameters. After that, the Euclidean distance between ARMA models is subtracted as a damage indicator for damage detection and localization and a top tensioned riser simulation model with different damage scenarios is analyzed using the proposed method with dynamic acceleration responses of a marine riser as sensor data. Finally, the influence of measured noise is analyzed. According to the damage localization results, the proposed method provides accurate damage locations of risers and is robust to overcome noise effect.  相似文献   

Hydroelastic response of marine risers subjected to internal slug-flow     

《Applied Ocean Research》2017

It is the purpose of this study to investigate the dynamic behaviour of catenary pipelines for marine applications, assuming the combined effect of harmonic motions imposed at the top, and the internal slug-flow. The analysis is based on the assumption of a steady slug-flow inside the pipe that results in a relatively simplified model for the formulation of the internal flow. The slug-flow model is described using several assumptions and empirical correlations which attempt to reveal the ill-understood and concealed properties of the slug-flow. The pipeline dynamics are investigated in the two dimensional space omitting the out-of-plane vibrations. The system of differential equations is generic and accounts for the steady effect of the internal liquid as is conveyed through the structure.The two models, those of the internal slug-flow and the pipeline’s dynamical model, are properly combined through the internal flow terms of the dynamic equilibrium system. The solution provided is achieved using a frequency domain technique which is applied to the linearized governing set. The effect of the slug-flow is assessed through comparative computations with and without internal flow effects. The conclusions are drawn having the structure excited under axial and normal motions paying particular attention to the variation of the dynamic components along the complete length of the pipeline.  相似文献   

The numerical and empirical evaluation of chimneys considering soil structure interaction and high-temperature effects     

《Soil Dynamics and Earthquake Engineering》2014

During the past strong ground motions, chimneys constructed according to international standards are representative of similar structures at industrial areas throughout the world, including those collapsed or moderately damaged in earthquake-prone regions. This is due to the specialty of structural characteristics and the special loads acting on the structure such as earthquakes, wind and differences in the level of temperature, etc. In this context, the researchers and designers should focus on the dynamic behavior of chimneys especially under high temperature and seismic effects. For this purpose, the main focus of this study is to evaluate the dynamic response of a chimney under the above-mentioned effects considering soil-structure interaction (SSI). A 52 m steel chimney in Yeşilyurt township of Samsun City in Turkey was studied. The in-situ model testing and numerical models were compared. Before the commissioning of the chimney, a series of tests was realized to define its dynamic characteristics in case of no-heat and after the fabric got to work, the same tests were repeated for the same sensor locations to understand the heat effect on the dynamic response of the chimney. The ambient vibration tests are proven to be fast and practical procedures to identify the dynamic characteristics of those structures. The dynamic testing of the towers promises a widespread use, as the identification of seismic vulnerability of such structures becomes increasingly important. The data presented in this study are considered to be useful for the researchers and engineers, for whom the temperature and SSI effects on steel chimneys are a concern. Using the modal analysis techniques, presented finite element simulation for the soil/pile foundation-chimney interaction system is verified. The results of modal analyses using numerical solutions are shown to have acceptable accuracy compared with results obtained by in-situ test. The present study also aims to provide designers with material examples about the influence of these on the seismic performance of steel chimneys by means of reflecting the changes in the dynamic behavior.  相似文献   

基于OpenSees的RCS组合框架结构抗震性能模拟分析     

门进杰  胡俊  王秋维  郭智峰 《地震学刊》2014,(5):649-655

选取已有钢筋混凝土柱—钢梁组合结构（RCS）框架的低周期反复试验数据,采用地震工程开源模拟软件OpenSees对其进行有限元模拟,对比骨架曲线与滞回曲线,试验结果与有限元结果吻合较好。随后考察弯矩放大系数（Mc/Mb=0.86、1.48、2.04）、柱轴压比（n=0.06、0.2、0.3、0.6、0.8）对抗震性能的影响,得到了各参数下框架的滞回曲线、骨架曲线和各特征阶段的荷载与位移值。分析了框架的破化过程、延性与强度退化。结果表明：RCS组合框架滞回曲线饱满,具有良好的变形及耗能能力;随着弯矩放大系数的减小、柱轴压比的增大,框架的水平极限承载力降低、屈服状态提前、位移延性降低。分析结果可供有关研究或工程应用参考。  相似文献   

海洋立管试验支座设计及其对涡激振动影响研究     

李莹  杨新华  郭海燕  李朋 《海洋工程》2013,31(3):31-37

针对大长细比顶张力立管内外流共同作用时涡激振动的试验研究,考虑端部铰接和固接两种边界条件,设计了可施加张力和内流的铰接支座和固接支座,并对两种支座进行数值模拟及受力分析,最后用于深水立管的涡激振动试验。立管模型材料采用6.2 m长铜管,外径20 mm,壁厚1.5 mm,分别支撑在铰接支座和固接支座上,施加不同的顶部张力、外流流速和内流流速。通过在立管表面粘贴光纤光栅应变计获得动态应变数据,分别从动态响应幅值、频率等方面对不同边界条件立管的试验数据进行对比分析,得出在顶张力、内流速相同的情况下,外流速相等时两端铰接立管的振动幅值大于两端固接立管,随着外流速的增加,两端铰接立管比两端固接立管率先发生锁振现象。  相似文献   

不同节点布置下二维涡激振动的无单元法参数化分析     

杨林  李华军 《中国海洋大学学报(自然科学版)》2012,42(5):105-110

尝试建立1种基于无单元法的涡激振动数值模拟算法,并给出适用于涡激振动分析的前处理自动布点方法.基于无单元法理论,使用动最小二乘法构造形函数,利用无单元伽辽金法,采用速度和压力分离模式,及手工布点和自动布点2种方法所得出的节点布置形式,对流场控制方程进行空间离散,模拟二维涡激振动的流场形态,并对VIV相关参数进行分析,计算不同节点布置情况下的升力系数(Cl)、曳力系数(Cd)及斯特罗哈数(St),并与物理模型实验结果进行对比.计算结果表明,无单元伽辽金法应用于立管VIV分析是可行的,且文中采用2种布点方法均能较好的模拟流场中泻涡脱落的形态,计算结果与传统方法和物理模型实验结果吻合良好.证明文中2种布点方法都能用于固定圆柱的二维VIV分析,但自动布点法能够更好地适用于复杂问题的计算及圆柱体在流场中的VIV动力响应分析.  相似文献