基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究   总被引：1，自引：1，他引：0  

陈文鹏  刘胤超  陈立卫 《海洋工程》2018,36(2):119-126

针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。  相似文献   

Electric Discharges in the Protoplanetary Nebula as a Source of Impulse Magnetic Fields to Promote Dust Aggregation     

Túnyi  I.  Guba  P.  Roth  L. E.  Timko  M. 《Earth, Moon, and Planets》2003,93(1):65-74

Lightning discharge generated in the protoplanetary nebula is viewed as a temporally isolated surge in the flow of electrically charged particles, similar to that of terrestrial lightning. If the current is intense enough, a powerful circular impulse magnetic field is generated around the instantaneous virtual electric conductor. Such magnetic field is capable of magnetizing dust grains containing ferromagnetic components present in its vicinity to their saturation levels. As a result, dust grains attract one another, forming the aggregates. This magnetically driven attraction suggests an important process possibly operational at an early stage of the planetary accretion. Based on both a classical model for electric conductor, and the theory of Lienard–Wiechert electromagnetic potentials, our calculations show that the magnetic impulse due to a discharge channel of a few cm in diameter transferring a charge of about 10⁴ electrons reaches as high as 10 T. At these magnetic fields, the ferromagnetic dust grains, and possibly the already-formed larger aggregates as well, are easily magnetized to the saturation levels, producing compact clusters exhibiting permanent magnetic moments.  相似文献   

汕尾市100kW波力电站空气透平与气室匹配设计   总被引：3，自引：0，他引：3  

梁贤光 《海洋工程》2005,23(1):53-61

根据用1/15模型,在造波水槽中进行试验获得气室的Δ Pi- Q、ηA- Q、 NA- Q特性,以及用300mm透平模型,在1000mm活塞式往复流透平试验台进行试验获得的对称翼透平、双向固定导叶冲动透平和双向自调节导叶冲动透平的CP-、ηT-特性,进行了气室与三种空气透平的匹配设计。表明在设计波况下,采用1.025m的双向自调节导叶冲动透平时,ηT·ηA达50.43%;采用0.975m的双向自调节导叶冲动透平时,ηT·ηA达46.66%;采用0.975m的双向固定导叶冲动透平时,ηT·ηA达33.66%;采用1.45m对称翼透平时,ηT·ηA仅为29.9%。并对四种不同匹配方案进行了对比分析。  相似文献   

往复流中双向导向叶冲动透平模型性能试验研究     

梁贤光  孙培亚  王伟  蒋念东 《海洋工程》2001,19(4):84-93

研制了 30 0双向自调导叶透平试验机组 ,安装在 10 0 0活塞式往复流透平试验台上 ,对两种叶轮方案和 6种不同喷咀、扩压器进行了不同活塞行程、不同周期和不同恒定输出电压下性能试验。试验结果表明在喷咀出口角α1=2 1 5°、扩压器入口角α2 =6 5 5°和α1=2 4°、α2 =6 3°组合最佳 ,最高效率达 5 3 3% ,而且在宽广流量系数范围内 ,特别是大流量系数范围内都有较高效率。大大优于常用对称翼透平。将上下游导叶固定 ,变成双向固定导叶透平。用No 1叶轮和 6种导叶出口角组合进行试验。表明最佳导叶出口角为 2 4°～ 30°,最高效率仍达 38 5 % ,比对称翼透平仍高许多  相似文献   

浅议反射法混凝土厚度检测   总被引：5，自引：0，他引：5  

吴庆曾  贺颢  陈卫红  李树军 《物探与化探》2003,27(3):232-236

隧道衬砌、路道、路面楼板等只有一个检测面,冲击回波法成为新的厚度及缺陷检测方法.由冲击回波法与基桩反射法的共性及特性揭示了这种方法的机理及频域与时域检测2种不同施测方法以及对激振的不同要求.用惠更斯菲涅尔带分析了水平分辨率,最后说明该种方法的技术关键.  相似文献   

基于脉冲频响函数的MATLAB动力方程求解方法   总被引：3，自引：0，他引：3  

马乐为  吴敏哲  谢异同 《世界地震工程》2003,19(2):168-171

提出一种基于脉冲频响函数并利用MATLAB求解的方法，由于脉冲频响函数利用卷积公式进行动力微分方法计算，因此，从理论上讲，它适合于任意外力下的动力方程求解，同时，MATAL又提供了卷积函数conv，所以，在MATLAB下求解动力方程将变得十分容易。  相似文献   

SEDIMENTATION STUDY ON PUMPED-STORAGE POWER STATION OF PUSHI RIVER     

WANG Tiefeng Northeast Investigation  Design  Research Institute  China ZHANG Zhi Northeast Investigation  Design  Research Institute  China YI Yue Northeast Investigation. Design  Research Institute  China 《国际泥沙研究》1997,(3)

I.INTRODUCTIONThePtlmped-storagepoll,erprojectofPushiriverisconsistedofupperreservoir,lobal-erreset'oir.watertransmissionSystemandpotvergeneratingsystem.ThelowerreservoirIviththecatchmentbasinareaof1141kmZisthewatersupplierl-c'hichislocatedonthedownstreamofthePushiriverinthesouthernpactofNortheastChina.Theupperreservoirisabout300-400metershigherthanthelowerresen!oirattheleftsideoftheriverwithcatchmentbasinareaof1.12km2.Thecharacteristicsoftheprojectandreservoirareshottviintablel-l.Ino…  相似文献   

海上风机吸力式桶形基础承载特性研究综述     

毋晓妮  廖倩  李晔 《海洋技术学报》2020,39(1):91-106

风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。  相似文献   

Effects of installation on the cyclic axial behaviour of suction buckets in sandy soils     

《Applied Ocean Research》2019

Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed.  相似文献   

Dynamic modeling and vibration suppression for an offshore wind turbine with a tuned mass damper in floating platform     

《Applied Ocean Research》2019

The worldwide demand for renewable energy is increasing rapidly. Wind energy appears as a good solution to copy with the energy shortage situation. In recent years, offshore wind energy has become an attractive option due to the increasing development of the multitudinous offshore wind turbines. Because of the unstable vibration for the barge-type offshore wind turbine in various maritime conditions, an ameliorative method incorporating a tuned mass damper (TMD) in offshore wind turbine platform is proposed to demonstrate the improvement of the structural dynamic performance in this investigation. The Lagrange's equations are applied to establish a limited degree-of-freedom (DOF) mathematical model for the barge-type offshore wind turbine. The objective function is defined as the suppression rate of the standard deviation for the tower top deflection due to the fact that the tower top deflection is essential to the tower bottom fatigue loads, then frequency tuning method and genetic algorithm (GA) are employed respectively to obtain the globally optimum TMD design parameters using this objective function. Numerical simulations based on FAST have been carried out in typical load cases in order to evaluate the effect of the passive control system. The need to prevent the platform mass increasing obviously has become apparent due to the installation of a heavy TMD in the barge-type platform. In this case, partial ballast is substituted for the equal mass of the tuned mass damper, and then the vibration mitigation is simulated in five typical load cases. The results show that the passive control can improve the dynamic responses of the barge-type wind turbine by placing a TMD in the floating platform. Through replacing partial ballast with a uniform mass of the tuned mass damper, a significant reduction of the dynamic response is also observed in simulation results for the barge-type floating structure.  相似文献