排序方式: 共有53条查询结果,搜索用时 15 毫秒
1.
2.
Maria Irene Bartolomeu Raposo Alexandre O. Chaves Paulo Lojkasek-Lima Manoel Souza D'Agrella-Filho Wilson Teixeira 《Tectonophysics》2004,378(1-2):43-63
Magnetic fabric and rock magnetism studies were performed on 32 mafic dikes of a Proterozoic dike swarm from the southern São Francisco Craton (SFC; Minas Gerais State, SE Brazil). Magnetic anisotropies were determined by applying anisotropy of low-field magnetic susceptibility (AMS) and anisotropy of remanent magnetization (ARM). The latter was performed imposing both anhysteretic (total (AAR) and partial
pAAR)) and isothermal remanence magnetizations (AIRM). Partial anhysteretic remanence anisotropy was performed based on remanent coercivity spectra from a pilot specimen of each site. In most sites, AMS is dominantly carried by ferromagnetic minerals, however, in some sites, the paramagnetic contribution exceeds 70% of bulk susceptibility. Rock magnetism and thin section analysis allow classifying the dikes as non-hydrothermalized and hydrothermalized. Magnetic measurement shows that the mean magnetic susceptibility is usually lower than 5×10−3 (SI). Ti-poor titanomagnetites up to pure magnetite pseudo-single-domain (PSD) grain sizes carry the majority of magnetic fabrics for non-hydrothermalized dikes whereas coarse to fine grained Ti-poor titanomagnetites carry the majority of magnetic fabrics for hydrothermalized dikes.Three primary AMS fabrics are recognized which are coaxial with ARM fabric, except for two dikes, from both non-hydrothermalized and hydrothermalized dikes. Normal AMS fabric surprisingly is not dominant (31%). The parallelism between AMS, pAAR0–30, pAAR30–60 and pAAR60–90 fabrics in the hydrothermalized dikes indicates that magnetic grains formed due to late-stage crystallization or to remobilization of iron oxides due to hydrothermal alteration after dike emplacement have acquired a mimetic fabric coaxial with the primary fabric given by coarse-grained early crystallized Ti-poor titanomagnetites. This fabric is interpreted as magma flow in which the analysis of Kmax inclination permitted the inference that the dikes were fed by horizontal or subhorizontal fluxes (Kmax<30°). Intermediate AMS fabric is the most important (41%) in the investigated swarm. It is interpreted as due to vertical compaction of a static magma column with the minimum stress along the dike strike. ARM determinations for these sites also remained intermediate except for two dikes. In one of them, AIRM fabric resulted in normal AMS fabric while for the other AAR fabric resulted in inverse AMS fabric. A combination of AMS and ARM fabrics suggest that magmatic fabric for both dikes were overprinted by some late local event, probably related to Brasiliano orogenic processes after dike emplacement. InverseInverse AMS fabric is a minority (four dikes). ARM determinations also remained inverse suggesting a primary origin for inverse AMS fabric. 相似文献
3.
4.
The North American Land Data Assimilation System project phase 2 (NLDAS‐2) has run four land surface models for a 30‐year (1979–2008) retrospective period. Land surface evapotranspiration (ET) is one of the most important model outputs from NLDAS‐2 for investigating land–atmosphere interaction or to monitor agricultural drought. Here, we evaluate hourly ET using in situ observations over the Southern Great Plains (Atmospheric Radiation Measurement/Cloud and Radiation Testbed network) for 1 January 1997–30 September 1999 and daily ET u‐sing in situ observations at the AmeriFlux network over the conterminous USA for an 8‐year period (2000–2007). The NLDAS‐2 models compare well against observations, with the National Centers for Environmental Prediction's Noah land surface model performing best, followed, in order, by the Variable Infiltration Capacity, Sacramento Soil Moisture Accounting, and Mosaic models. Daily evaluation across the AmeriFlux network shows that for all models, performance depends on season and vegetation type; they do better in spring and fall than in winter or summer and better for deciduous broadleaf forest and grasslands than for croplands or evergreen needleleaf forest. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
5.
使用大气辐射测量实验(Atmospheric Radiation Measurements:ARM)在美国南部大平原站点(Southern Great Plains:SGP)长时间序列(2001 2010年)的地基主动遥感云(Active Remote Sensing of Clouds:ARSCL)和美国国家环境预报中心(National Centers for Environmental Prediction:NCEP)全球预报系统(Global Forecast System:GFS)模式预报资料,对比分析了两者云量在不同时间尺度内(年际、月份和季节)的差异。结果表明,GFS模式预报总云量为83.8%,略高于地基观测结果(78.1%);两者总云量差异在秋季最大(8.8%),春季最小(2.2%)。在低垂直高度分辨率(≥3 km)时,地基探测低云、中云和高云的云量分别为46.1%、43.5%和61.2%;模式预报三类云的云量均要高于地基探测的云量,差异分别为9.6%、17.2%和9.1%。但是,在高垂直分辨率(250 m)时,地基探测云量在大多数高度层上要高于模式预报结果。这应该是两种资料廓线中有云出现的高度层数目存在差异引起的。地基观测和GFS模式预报同时表明,SGP站点上空云量垂直廓线呈现双峰结构,在边界层附近(1 km)和上对流层区域(8-12 km)云量较大,2-3 km高度范围内云量较小。在春夏秋冬四个季节内,两种资料在低层边界层附近的最大云量偏差分别为9.5%、8.8%、7.8%和11.2%。 相似文献
6.
介绍了ARM(advanced RISC machines,英国电子公司)和FPGA(可编程逻辑阵列)在水声浮标(文中简称新型浮标)数据采集存储中的应用。利用FPGA丰富的硬件资源实现新型浮标系统多通道同步采样,并在ARM模块中移植Windows FAT32文件系统,嵌入USB底层驱动,实现采集数据的高速存储。描述了系统设计与实现,并对该数据采集存储系统进行了通道隔离度、动态范围、系统自噪声和功耗等指标测试。实验结果表明,该系统通道隔离度90d B(参考1V);动态范围≥110d B(参考1V);系统自噪声≤40d B(参考1 n V);系统总功耗为4.2 W。 相似文献
7.
针对当前氢钟温度控制系统所存在的不足,提出了全新的设计思路:综合三路温度控制在一个系统中,缩小控制电路的体积,同时提高温度控制系统的可操作性。考虑到氢钟腔体自动调谐的变容二极管电压存在漂移甚至超出正常控制范围,这将直接影响氢钟频率稳定度和频率漂移率性能指标。结合温度控制系统,设计了Vdio自动补偿系统。系统硬件设计以32位ARM处理器为核心,由于处理器芯片本身是个片上系统,所以不仅功能较强,还大大简化了系统的板级设计,软件设计引入了实时操作系统内核UCOS-Ⅱ。系统软硬件相结合,能很好地实现监控任务。 相似文献
8.
9.
10.
地电观测专用高精度数据采集器研制 总被引:1,自引:0,他引:1
针对地震地电前兆观测,研制基于ARM9平台和32位模数转换器ADS1281的地电观测高精度数据采集系统,实现了高精度和低噪声采样.本文给出地电观测高精度数据采集系统的硬件设计、软件实现和系统指标测试结果.该系统采样率可设置为1次/s至100次/s,1至6通道任意配置,通信协议符合中国地震局地震前兆台网专用设备网络通信规程,可以满足地震地电传感器信号采集和网络接入需求. 相似文献