Properties of geogrid-reinforced marine slope due to the groundwater level changes     

Ramin Vali  Jie Li  Gholamreza Shams  Pieter van Gelder 《Marine Georesources & Geotechnology》2018,36(6):735-748

Evaluation of slope stability, especially in the absence of a proper bed such as marine soils, is one of the most important issues in geotechnical engineering. Using geogrid layers to enhance the strength and stability of embankments is regarded as a commendable stabilization method. On the other hand, groundwater level erratically fluctuates in coastal areas. Therefore, the aim of this research is to study the effects of groundwater level changes on stability of a geogrid-reinforced slope on loose marine soils in Qeshm Island, Iran. At first, geotechnical properties of the site were obtained by comprehensive series of geotechnical laboratory and in situ tests. Then, by simultaneous changes of groundwater level and several parameters such as embankment slope, loading, geogrid length, geogrid number, and tensile strength of geogrid, different characteristics such as embankment safety factor (SF), vertical and horizontal displacements at embankment top and embankment base were studied. It was observed that groundwater level had significant effects on behavior of the embankment. For most of the observations, by decreasing the groundwater level, the displacements decreased and consequently safety factor increased. Increasing the length, number, and tensile strength of geogrid led to the reduction of displacements and an increase in the safety factor.  相似文献   

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits     

《Applied Ocean Research》2019

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.  相似文献   

酒钢黑沟矿爆破效应研究     

苏宏伟 《高原地震》2003,15(1):51-54

利用爆破记录的原始资料，计算出地动位移、振动速度，然后确定K、α值。根据不同建筑物的安全振动速度，给出安全爆破的最大Q(炸药量)的参考值。  相似文献   

Decoupled seismic analysis of an earth dam   总被引：2，自引：0，他引：2  

Ernesto Cascone  Sebastiano Rampello 《Soil Dynamics and Earthquake Engineering》2003,23(5):349-365

The seismic stability of an earth dam is evaluated via the decoupled displacement analysis using the accelerograms obtained by ground response analysis to compute the earthquake-induced displacements. The response analysis of the dam is carried out under both 1D and 2D conditions, incorporating the non-linear soil behaviour through the equivalent linear method. Ten artificial and five real accelerograms were used as input motions and four different depths were assumed for the bedrock.1D and 2D response analyses were in a fair agreement with the exception of the top third of the dam where only a 2D modelling of the problem could ensure that the acceleration field is properly described. The acceleration amplification ratio obtained in the 2D analyses was equal to about 2 in all the cases considered, consistently with data from real case histories.The maximum permanent displacements computed by the sliding block analysis were small, being less than 10% of the service freeboard; a satisfactory performance of the dam can then be envisaged for any of the seismic scenarios considered in the analyses.  相似文献   

The objectness of everyday life: disburdenment or engagement?     

Neil Maycroft 《Geoforum》2004,35(6):713-725

  相似文献   

Effects of installation on the cyclic axial behaviour of suction buckets in sandy soils     

《Applied Ocean Research》2019

Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed.  相似文献   

Accumulation by securitization: Commercial poaching,neoliberal conservation,and the creation of new wildlife frontiers     

《Geoforum》2016

Part of a broader interest in the escalating securitization of conservation practice, scholars are beginning to take note of an emerging relationship between conservation–securitization, capital accumulation, and dispossession. We develop the concept of accumulation by securitization to better grasp this trend, positioning it in the critical literatures on neoliberal conservation, green grabbing, and conservation-security. The concept captures the ways in which capital accumulation, often tied to land and resource enclosure, is enabled by practices and logics of security. Security logics, moreover, increasingly provoke the dispossession of vulnerable communities, thereby enabling accumulation. We ground the concept by turning to the Greater Lebombo Conservancy (GLC) in the Mozambican borderlands. This is a new privately-held conservancy built as a securitized buffer zone to obstruct the movement of commercial rhino poachers into South Africa’s adjacent Kruger National Park. We show how wildlife tourism-related accumulation here is enabled by, and in some ways contingent upon, the GLC’s success in curbing poaching incursions, and, relatedly, how security concerns become the grounds upon which resident communities are displaced. In terms of the latter, we suggest security provides a troubling, depoliticized alibi for dispossession. Like broader neoliberal conservation and green grabbing, we illustrate how accumulation by securitization plays out within complex new networks of state and private actors. Yet these significantly expand to include including security actors and others motivated by security concerns.  相似文献   

Displacement velocity effects on rock fracture shear strengths     

《Journal of Structural Geology》2016

Triaxial shear tests are performed to assess the effects of displacement velocity and confining pressure on shear strengths and dilations of tension-induced fractures and smooth saw-cut surfaces prepared in granite, sandstone and marl specimens. A polyaxial load frame is used to apply confining pressures between 1 and 18 MPa with displacement velocities ranging from 1.15 × 10⁻⁵ to 1.15 × 10⁻² mm/s. The results indicate that the shearing resistances of smooth saw-cut surfaces tend to be independent of the displacement velocity and confining pressure. Under each confinement the peak and residual shear strengths and dilation rates of rough fractures increase with displacement velocities. The sheared-off areas increase when the confining pressure increases, and the displacement rate decreases. The velocity-dependent shear strengths tend to act more under high confining pressures for the rough fractures in strong rock (granite) than for the smoother fractures in weaker rocks (sandstone and marl). An empirical criterion that explicitly incorporates the effects of shear velocity is proposed to describe the peak and residual shear strengths. The criterion fits well to the test results for the three tested rocks.  相似文献   

FLAC3D在边坡数值分析及位移监测中应用     

张颖  孙兆涛  裴仲文 《探矿工程》2018,45(3):57-61

以辽宁省岫岩县某山头边坡为例,通过槽探、钻探、大型剪切试验等多种手段,找出合理潜在滑动面。利用FLAC3D软件对该边坡进行三维数值模拟,分析应力应变关系,得出变形较大及应力集中区域,同时利用强度折减法得出边坡的安全系数,评价其稳定性。将从边坡后缘张拉裂隙上布设的位移监测点采集到的数据,与数值模拟结果进行对比分析,验证数值模拟的可靠性,为边坡抗滑设计提供依据。  相似文献   

Non-linear seismic behavior of structures with limited hysteretic energy dissipation capacity   总被引：1，自引：0，他引：1  

Pierino Lestuzzi  Youssef Belmouden  Martin Trueb 《Bulletin of Earthquake Engineering》2007,5(4):549-569

This paper investigates the non-linear seismic behavior of structures such as slender unreinforced masonry shear walls or precast post-tensioned reinforced concrete elements, which have little hysteretic energy dissipation capacity. Even if this type of seismic response may be associated with significant deformation capacity, it is usually not considered as an efficient mechanism to withstand strong earthquakes. The objective of the investigations is to propose values of strength reduction factors for seismic analysis of such structures. The first part of the study is focused on non-linear single-degree-of-freedom (SDOF) systems. A parametric study is performed by computing the displacement ductility demand of non-linear SDOF systems for a set of 164 recorded ground motions selected from the European Strong Motion Database. The parameters investigated are the natural frequency, the strength reduction factor, the post-yield stiffness ratio, the hysteretic energy dissipation capacity and the hysteretic behavior model (four different hysteretic models: bilinear self-centring, with limited or without energy dissipation capacity, modified Takeda and Elastoplastic). Results confirm that the natural frequency has little influence on the displacement ductility demand if it is below a frequency limit and vice versa. The frequency limit is found to be around 2 Hz for all hysteretic models. Moreover, they show that the other parameters, especially the hysteretic behavior model, have little influence on the displacement ductility demand. New relationships between the displacement ductility demand and the strength reduction factor for structures having little hysteretic energy dissipation capacity are proposed. These relationships are an improvement of the equal displacement rule for the considered hysteretic models. In the second part of the investigation, the parametric study is extended to multi-degree-of-freedom (MDOF) systems. The investigation shows that the results obtained for SDOF systems are also valid for MDOF systems. However, the SDOF system overestimates the displacement ductility demand in comparison to the corresponding MDOF system by approximately 15%.  相似文献