2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析     

高丽娟  邢喜民  高歌  李尚伟 《大地测量与地球动力学》2019,39(10):1002-1006

2017年精河M_S6.6地震震前，尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化，经现场落实确认，异常是可靠的。根据这3个台的记录资料计算相对应变的变化，结果表明，地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现，相对应变场异常期间主方向与震源机制解P轴方位较为一致。  相似文献   

天文(重力)水准的新手段及其计算方法     

张赤军 《大地测量与地球动力学》2002,22(4):31-34

介绍当今确定天文大地垂偏差的新仪器－CCD自动天体测量仪和确定两点间高程异常差的新方法，该方法用单极坐标代替繁琐的双极坐标进行计算，讨论了天文重力水准的误差及垂线偏差非线性影响等问题，估计在不久的将来，用这一手段施测山区似大地水准面的精度可望达到厘米级。  相似文献   

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures     

刘建起陈滨  王海艳 《中国海洋工程》2005,19(3):519-528

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.  相似文献   

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area     

Dong Soo Kim  Byoung Chul Lee 《Marine Georesources & Geotechnology》2005,23(1):117-136

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.  相似文献   

高原山区局部大地水准面精化方法研究     

李海文  罗满建  吴友平  王家帮 《测绘科学》2008,33(5)

局部大地水准面精化的实质是精确计算出大地水准面的起伏变化情况。一般情况下,需要密度足够的重力数据,依重力异常密集计算大地水准面差距或高程异常。但是在大陆西部高原山区重力点密度是不够的,无法达到大地水准面精化的目的。本文从理论上证实了用地形和岩石密度数据进行局部大地水准面精化的可行性。  相似文献   

青藏高原东缘龙门山晚新生代剥蚀厚度与弹性挠曲模拟   总被引：7，自引：3，他引：7       下载免费PDF全文

李勇  ALDENSMORE  周荣军  MA  ELLIS 《地质学报》2005,79(5):608-615

龙门山是青藏高原东缘边界山脉,具有青藏高原地貌、龙门山高山地貌和山前冲积平原三个一级地貌单元。利用数字高程模式图像和裂变径迹年代测定方法研究和计算龙门山晚新生代剥蚀厚度与剥蚀速率,结果表明:3.6 Ma以来龙门山的剥蚀厚度介于1.91-2.16 km之间,剥蚀速率介于0.53-0.60 mm/a之间。在此基础上,开展了该地区岩石圈的弹性挠曲模拟,结果表明龙门山的隆升机制具有以构造缩短隆升和剥蚀卸载隆升相叠合的特点。3.6 Ma之前,龙门山的隆升与逆冲推覆构造负载有关,以构造缩短驱动的构造隆升为特色;3.6 Ma之后,龙门山的隆升与剥蚀卸载驱动的抬升有关,并以剥蚀卸载隆升为特色,进而提出了龙门山晚新生代以来的隆升机制以剥蚀成山作用为主的认识。  相似文献   

挠曲线复位的微分方程解法求梁的位移   总被引：5，自引：0，他引：5  

喻晓今 《华东地质学院学报》2003,26(3):271-273

梁位移求解的方法主要有两种：积分法和叠加法。积分法的困难是当多个荷载同时作用时，要按控制面分段列弯矩方程，这样，两次积分时带来的积分常数较多，导致依边界条件、连续条件定这些常数时要解多个联立方程，计算繁杂。梁位移求解的叠加法是借用典型荷载下梁已知积分结果来进行对应位置位移的叠加，具体是查转角方程、挠曲线方程表格。从表中知，梁任一位置处的位移方程大多是多次多项式，很难记忆，故离开表格便无法采用。本文找到了一种新的方法求梁的位移，通过设置比拟梁，使比拟梁的挠曲线复位于原梁，从而建立了相应的微分方程，求解此方程后便可得梁的位移，避开了分段多次积分或查表的弱点。  相似文献   

预测和控制深基坑变形的抗隆起稳定系数法   总被引：1，自引：0，他引：1  

谢小林  贾坚 《上海国土资源》2004,107(1):22-27

本文讨论了在软土基坑工程设计施工中所涉及到的抗隆起稳定系数的合理计算方法；通过对大量上海深基坑工程的计算分析并结合现场实测数据论证了利用抗隆起稳定系数进行基坑变形预测和控制的合理性，并提出了适用稳定系数法控制基坑变形的设计计算预测公式：δh/H～Ks关系式。  相似文献   

Ring foundation on elastic subgrade: an analytical solution for computer modelling using the Lagrangian multiplier method          下载免费PDF全文

Shahin Nayyeri  Masood Hajali  Caesar Abi Shdid 《国际地质力学数值与分析法杂志》2016,40(14):2017-2030

In the practice of geotechnical engineering, the case of a ring footing carrying a set of concentrated point loads is a common problem. At times, the induced vertical and angular displacements for the ring footing need to be evaluated at a relatively precise level. By making use of the governing set of equations derived for the case of a general curved beam, expressions that can be easily implemented in modern computing software are derived for the vertical and angular displacements of a ring footing of rectangular cross section as functions of the radial position. The loading case considered is a vertical point load, and the soil is modelled as elastic. Estimates of the displacements have been shown for a common range of practical applications. The behaviour for a set of concentrated loads may be evaluated using the derived equations through direct superposition. Nonlinear finite element analysis is used to evaluate the vertical deflection and angular twist of the ring foundation. Numerical analysis performed for three ring foundations with different radii and cross sections is reported to validate the accuracy of the derived analytical solution. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

惯性测量系统中垂线偏差和重力异常的确定     

孙付平 《测绘学院学报》1989,(1)

本文对惯性测量各项系统误差及异常重力场进行了分析和研究,并在此基础上建立了两种用于惯性重力测量的估算模型;模拟计算的结果表明,所建模型在原理上是可靠的,结果是令人满意的;同时,本文较为详细地分析了各项系统误差对异常重力元素估计精度的影响,对卡尔曼滤波应用中的有关问题进行了讨论。  相似文献